Where s the air conditioner s filter? How to install the air conditioner filter

In general, the air conditioner filter is inside the shell baffle of the air conditioner indoor unit. Pry open the buckles around the baffle and lift the casing to reveal the air conditioning filter. 1.

The most important function of an air conditioner filter is to prevent dust. Air conditioning filters that have now been improved over many generations are designed with photocatalysts to improve indoor air quality. For example, formaldehyde in decoration has a certain adsorption performance.

After decoration, you can turn on the air conditioner for ventilation, so that the harmful substances in the room can be adsorbed by the filter. 2.The air conditioning filter can play a perfect role in purifying the air, purifying benzene and carbon dioxide, and also has a certain sterilization effect, which can effectively block the spread of air.

At the same time, the air conditioning filter also has a certain deodorization ability, which can effectively absorb and purify the bad odors produced by second-hand smoke and garbage in the room. Generally, if you turn on the air conditioner for 10 minutes, you can clearly feel the obvious change in the taste of indoor air. 3.

The anti-fouling ability of the air conditioner filter is also worth mentioning. It can effectively prevent excessive dust in the air conditioner, prevent the generation of mold, and have a certain resistance to the generation of water rust. It can be said that the air conditioner filter plays a certain role in protecting the air conditioner itself.

Daily maintenance of air conditioners: In order to properly adjust the temperature, most air conditioners on the market have cooling and heating functions. Users can adjust the temperature according to actual needs, but they must pay attention to keep the temperature of the air conditioner as stable as possible when adjusting, and avoid repeatedly turning up and down, otherwise indoor personnel are easy to feel uncomfortable, consume more electricity, and even shorten the service life of the air conditioner, so be careful.

2.Clean regularly. As mentioned in the above article, when the air conditioner is on, the filter will block the debris brought by the return air system, and it is easy to clog after a period of time, so users need to clean the filter regularly.

If it is only used in the summer, then the filter should be cleaned every summer before it is put into use to enhance the cooling effect. 3. The internal structure of regular maintenance of air conditioners is complicated. In order to ensure safety, users need to find professionals to regularly check and maintain during use.

If there is an aging original, it needs to be replaced in time. If the refrigerant is insufficient, it can also be replenished in time, which can prolong the service life of the equipment while ensuring safety.

The air conditioner's filter (hang-up) is located in the black part of the figure below

After the air conditioner is used for a period of time, a large amount of dust and dirt will accumulate on the filter, evaporator and air supply system, and a large number of bacteria and viruses will be produced. These harmful substances circulate indoors with the air, polluting the air, spreading diseases, and seriously endangering human health. Dirt will reduce the refrigeration efficiency of the air conditioner, increase energy consumption, and shorten the service life of the air conditioner.

Therefore, the air conditioner must be cleaned after a period of use or when it is shut down during the change of seasons. In this way, you can be guaranteed a healthy and clean air environment.

First of all, remove the dust filter according to the manual, and pay attention not to touch the metal part of the indoor unit when disassembling to prevent it from being scratched.

2.After removing the air filter, gently pat or use an electric vacuum cleaner to remove the dust. If the dust filter accumulates too much dust, it can be rinsed with water or dipped in neutral detergent with a soft brush, but the water temperature should not exceed 50 or more during cleaning, and washing powder, dish soap, gasoline, banana water, etc. cannot be used to avoid the deformation of the dust filter.

Also, do not clean with a sponge, as this will damage the surface of the dust filter.

3.After rinsing with clean water, wipe dry with a soft cloth or put it in a cool place to dry, never expose it to the sun or dry it in an open flame such as a stove, so as to avoid the deformation of the dust filter.

4.To clean the panel, gently wipe with a soft cloth dampened with warm water or mild detergent, then dry with a dry, soft cloth.

If it is a hanging air conditioner, in the internal unit, it has a shell, take it from both sides and turn over the shell to see the filter, take it off directly, and look at the direction when you take it. If it is a cabinet machine, it is generally underneath, it is an air filter, but there is also a cover on the outside, some are covered with screws, some are screwed on the side, and some are caps fixed with clips, but they are all underneath.

1. Open the outer panelStand in a level direction with the air conditioner and open the exterior panel outward.

2. Expose the filterWhen you open it, you can see that the filter is exposed.

3. Push open the filterGently push the filter away with your hand.

4. Pull out the filterBuckle the sides and pull out the air conditioner's filter.

5. Successfully take it outFinally, the air conditioner's filter was successfully removed.

Before disassembling the air conditioner filter, carefully open the air conditioner shell, generally the air conditioner shell has two small card slots stuck, and gently pull the outer cover outward. After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently pick open the outer cover to fully open. Then it is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and then gently drag the filter down after the card slot.

After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be removed separately to be cleaned and dried. Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it is dry. Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

Compared with disassembly, it is troublesome to install the filter screen, and when installing, you must stuff the filter screen along the card slot, and you must look at the front and back, and there is a small protrusion buckle in the back. Once you've put the filter in completely, make sure that the inside side gets stuck in the slot and doesn't fall off. Then press the filter without arching, and finally clamp the protruding buckle in the card slot.

Gree air conditioner filter disassembly and assembly steps - how to clean the Gree air conditioner filter.

When cleaning the filter, first cut off the power supply, then open the panel and take out the filter. Dust the filter with a brush vacuum cleaner and then rinse it with clean water. When it is too dirty and oily, it can be cleaned with detergent or neutral soapy water, rinsed with water and dried.

It should be noted that it must not be washed with hot water above 40 degrees. Do not use laundry detergent, dish soap, gasoline, banana water, etc., to avoid deformation of the filter. In addition, after rinsing with clean water, wipe dry with a soft cloth or blow dry in a cool place, and never expose to the sun or dry in an open flame such as a stove to avoid deformation of the filter.

After installing the filter, plug in the power and wait for 3-5 minutes, set the remote control to the refrigeration mode, set the temperature to the lowest condition, and turn on the machine. After the test machine is checked for hidden dangers, the wind speed switch of the remote control is set to run in different gears to observe whether there is abnormal noise in the internal machine. After about 15 minutes of running after turning on the machine, observe whether the fan of the external unit is running normally, and whether there is any abnormal noise of the external unit.

After about 30 minutes of operation, observe whether the air outlet of the indoor unit has a cold air feeling, whether there is condensate flowing out of the outlet pipe of the outdoor unit, and whether the flowing water is smooth.

Gree air conditioner filter.

Among the many components of the air conditioner, the air conditioning filter is often indispensable, although the structure of the air conditioning filter is not complicated, but the role it plays is very critical, and the same as the air conditioner, the air conditioning filter also needs regular maintenance and maintenance, many people use Gree air conditioning at home, many people are relatively unfamiliar with the disassembly and assembly steps of the Gree air conditioning filter, do not know how the Gree air conditioning filter should be disassembled and installed, you can follow the method of teaching you to disassemble and assemble the Gree air conditioning filter, Avoid damage to the Gree air conditioner filter due to improper disassembly and assembly methods.

Looking at the manual, it is generally to buckle the outer cover off.

The air conditioner filter is generally installed at the air inlet or outlet of the indoor unit.

Place in the direction of the air intake. A piece with a sponge should be placed in the direction of the air intake, because each air conditioner is different, so the right or left is not the same, the two filters are the same function, the purpose is only to prevent dust from entering the air conditioner, the small filter is only used for anti-enzyme, or the absorption chamber is lacking in methanol and other functions, but there is a certain life of Zen guessing. If you use an air conditioner that has been used for a long time, you can remove it directly.

Precautions for the use of air conditioner filters.

1. The air filter in the indoor unit of the air conditioner is generally in a normal use environment, and the validity period is 6 months.

2. If the air conditioner is not used frequently, the use environment is good, and the air cleanliness is high, as long as the surface of the air filter does not have serious discoloration (gray-brown), the air filter can be taken out and exposed to the sun for 2 hours, and the dust on the surface can be cleaned with a brush (can not be cleaned with water) and can be reused.

On-hook in. Mask.

below. General machine.

Sides. All have a concave place.

Both hands at the same time. Outward.

Just lift it. Some.

Middle. There is a buckle that opens with a push or press of your hand.

Cabinet machine. Filter.

Next. Panel.

On the back, there is a panel.

Screws, remove the screws and press the panel down by hand, and then mix it out, you can lift the filter screen.

There are cabinet machines. In the middle.

The location has one.

Plastics. The plug snapped.

Screws, plugs.

Remove. That's it. Or you can't find the screws.

After the panel of the indoor unit, two from the panel.

button to open the panel and remove the filter in the direction of the screen. Remove from the reverse side with water and cool dry.

As is. Put it back.

Tool Material Slim Early: Haier KFR-35GW 05GFC23 Air Conditioner.

1. First of all, break the card slots on both sides of the Haier KFR-35GW 05GFC23 air conditioner and remove the air conditioner shell.

2. Then cut out the filter screen from the lower card slot of Haier KFR-35GW 05GFC23 air conditioner.

3. Then pull out the round filter from the upper card slot of Haier KFR-35GW 05GFC23 air conditioner. Destroy the sparrow.

4. Finally, the filter screen of Haier KFR-35GW 05GFC23 air conditioner was successfully removed.

1. When the machine is turned off, press the function button, and the cleaning pattern of the shower head icon flashes.

2. Press the up or down button to confirm, the cleaning icon will light up, and then the shell of the air conditioner will start to rotate automatically, and stop after about half a minute.

3. At this time, the filter screen will be turned from the back to the front, then the power socket is unplugged, and the screws on the panel are removed with a screwdriver.

4. Then open the buckle up and down with your hands carefully, remove the air inlet panel, pull out the filter screen to the right, and then clean it with warm water, do not use hot water, or use a vacuum cleaner to suck it directly, and install it back in reverse order after drying, and it will automatically rotate back to the back after powering on.