How to remove the filter of Haier vertical air conditioner

Cut off the power supply. 2.The tool that can be used is a screwdriver.

Locate the screw locks at the corners of the air conditioner and unscrew them with a screwdriver. You can disassemble the casing of a vertical air conditioner. 3.

Generally, the filter is plugged directly into the air conditioner. After opening the case, you can directly remove the filter inside the air conditioner. 4.

Clean the filter and place in a cool place to dry. Do not expose it to sunlight. After processing, install the filter as it was.

1.If you remove the filter of the cabinet air conditioner, the first step is to cut off the power supply. 2.

Then use a screwdriver to unscrew the screws at the four corners of the air conditioner and remove the casing of the air conditioner first. 3.Generally, the filter of the air conditioner is installed inside the air conditioner, and you can see it when you open the shell.

How do I remove the aircon filter?

1. When disassembling the air conditioner filter, the air filter should be cut off first, and then the air conditioner panel should be removed. Under normal conditions, the air conditioner has a hidden handle on both sides. At this point, the handle allows you to open and open the panel. So that we can see the filter of the air conditioner;

2. The air conditioner filter is very easy to disassemble, and the air conditioner filter can be cleaned directly. There are still some problems to pay attention to when cleaning the air conditioner filter, do not use a strong alkaline cleaning liquid;

3. Clean the air conditioner filter, then buckle the air conditioner back and continue to use it.

How do I clean my cabin filter?

1. First dial the power of the air conditioner. This is very important, electrical appliances must pay attention to safety;

2. Remove the front panel of the air conditioner, open it directly, turn it on, and you will see two filters;

3. Remove the filter, rinse the water pipe with tap water, do not use detergent and other items, rinse directly;

4. Air-dry in a cool place, do not expose to sunlight, the filter is generally plastic, can not withstand high temperature;

5. Put the cleaned filter back into the air conditioner. If there is a dirty place inside the air conditioner, clean it beforehand. In this way, the air conditioner will be cleaner and fresher when used again.

What are the benefits of cleaning aircon filtration?

1. Clean the air conditioner in time to prevent the occurrence of air conditioning odor. An aircon filter will filter out dust and bacteria from the air. At this time, the filtered dust and bacteria will be adsorbed into the filter network to breed, eventually leading to mold, and after a long time we will ask for the smell of the air conditioner;

2. Improved heat dissipation. More and more dust on the filter screen will block the air outlet of the air conditioner, affecting the heat dissipation effect of the air conditioner, and eventually the working efficiency of the air conditioner will also be reduced.

Cleaning your aircon filter is actually a good thing to do, not only to ensure that the air blown by the aircon is cleaner and fresher. Moreover, from a health point of view, it is cleaned scientifically to prevent the spread of bacteria and viruses and effectively inhibit the emergence of air-conditioning diseases. You can remove the air conditioner filter according to the same method as cleaning the air conditioner filter.

Be sure to remove the air conditioner filter only after the power is off. And after cleaning the filter of the air conditioner, you should not expose it to the sun. Otherwise, it is easier for the plastic to be deformed, so it is best to clean it with water.

Operating equipment: Haier inverter air conditioner.

First, break the outer panel outward, as shown in the figure below

, revealing the filter in the red circle, as shown in the figure below

Then push out the filter, as shown in the figure below:

Then pull out the filter of the air conditioner as shown in the picture below:

Finally, the filter of the air conditioner was successfully taken out, as shown in the figure below:

Here's how:

Step 1: If there is a manual, first see if the manual has a specific air conditioning structure and how to remove the network. If not, here are the common methods.

Step 2: Open the air conditioner shell, pay attention to be careful, usually there are two small card slots stuck, gently pull the outer cover outward.

Step 3: After opening the outer cover, you will also see that there are two buckles inside, and you have to gently pick open it to make the outer cover fully open.

Step 4: At this time, you can take off the filter screen, the general filter screen is stuck in the card slot, you only need to push the filter screen up slightly, and the bottom will be out of the card slot, and you can take the past with a little hand drag.

How to disassemble the Haier air conditioner filter** is as follows:

1. Remove the panel; Some have screws on the left and right sides, and some only have one screw in the middle or on the right side.

2. Gently push up the protrusion in the center of the filter, and then pull down to remove the filter.

3. Install a filter.

Note: Turn off the power of the air conditioner before cleaning the filter; Determine the position of the air inlet (the air inlet of the hang-up air conditioner is at the top of the machine, and the air inlet of the cabinet air conditioner can be divided into left, right and lower air inlets); When cleaning the filter screen, you can use clean water below 40 degrees Celsius, if the filter screen is dirty, you can use a soft brush and neutral soapy water to assist in cleaning; The filter can be installed after it has dried naturally.

1. First of all, open the shell of the air conditioner, and then you can see the filter screen of the air conditioner, generally there are two card slots outside the air conditioner, and you can open it by gently pulling the card slot outward.

2. After the outer cover is opened, it is easy to remove the filter screen, as long as the lower part of the filter screen is grasped, and then gently dragged down, generally speaking, the air conditioner has two filters.

3. After taking it off, use a fine-haired toothbrush to clean the dust on it.

4. After cleaning, be sure to dry the filter.

5. Because there is a card slot on the top of the filter screen, generally speaking, the card slot is facing down.

6. Stuff the filter screen into the host along the card slot, lay the filter flat, and install it.

1. Open the air inlet grille

2. Gently push up the center protrusion of the filter screen, and then pull down:

3. Install a filter.

Note: 1. Unplug the air conditioner socket before cleaning and turn off the air conditioner;

2. When installing the filter screen, do not install the left and right side of the screen, and refer to the disassembly steps when installing;

3. You can directly use warm water to clean the filter screen. In order to be able to clean, you can use detergents and detergents that are commonly used in household use, and you can also use a brush to clean them. It is recommended to use a soft brush for brushes, and avoid using a hard brush to break the gap between the filters.

Attached is the method of removing the filter screen of other models:

After removing the filter of the air conditioner, we can clean the filter of the air conditioner. We can carefully observe that if the filter of the air conditioner is dirty and dusty, then we put the filter of the air conditioner into a detergent specially designed to clean the air conditioner, soak it for ten to fifteen minutes, and then take it out, rinse it with clean cold water, wipe it with a towel, and put it in a cool place to dry. And if there is less dust in the air conditioner filter, you only need to rinse it with clean cold water and brush it lightly with a soft brush.

In fact, the filter of the air conditioner is relatively simple to clean.

Hanging air conditioner, there is a small groove on both sides of Haier, but you can't open the cover, and you can't take it out of the net.

Looking directly at the manual, I remember that the wall-mounted one lifted the shell and took it out directly.

It's very simple, find a screwdriver, disassemble the air inlet under the air conditioner, and then pull out the filter and flush it with water.

Hello, thank you for asking the company.

Before disassembling the air conditioner filter, carefully open the air conditioner shell, generally the air conditioner shell is stuck with two small card slots, and gently pull the outer cover outward.

After opening the outer cover of the air conditioner, there are often two buckles inside, and it is necessary to gently pick open the outer cover to fully open. Then it is to take the filter, the filter is relatively easy to take, but it is stuck by a few card slots, first push the filter up, and then gently drag the filter down after the card slot.

After removing the filter, some air conditioners have black particles that strengthen the filtration, which should be removed separately to be cleaned and dried.

Then carefully rinse the filter with clean water several times, you can scrub it with a soft brush several times, and finally dry it in a ventilated place until it is dry. Be sure not to bend the filter when cleaning, although it is elastic, but the plastic one can not withstand bending.

You are welcome to ask the company questions again.

We wish you a happy work life

There are two small card slots that open with a single pick.

The first method of disassembling the filter screen: pull out the air conditioner socket, power off the air conditioner, there is a buckle between the filter screen and the filter bracket (if there is a baffle, the left and right air inlet baffles will be flipped forward), the filter screen will be pushed out of the buckle, the filter screen will be pulled outward along the arc direction, and the filter screen of the lower air inlet will be gently pulled out from the bottom of the air conditioner. The second:

First cut off the power supply, then remove the panel on the front of the air conditioner, and directly open it up, so that you will see the two filters, take out the filters, clean the filter with water or vacuum cleaner, the water temperature should not exceed 40 degrees, wash with a hot damp cloth or neutral detergent, do not use things like dish soap, and then wipe it with a dry cloth, or you can put it in a cool place for air drying, do not expose it to the sun under the sun, it should be that the filter screen is generally plastic, and it can not withstand the high temperature of the sun; Rinse with clean water, please do not wash the filter with insecticides or other chemical detergents. If there is dust or dirt in the air conditioner, wipe it clean in advance, so that the air conditioner will be refreshing and healthy. The third type:

First, flip the left and right air inlet guides forward, and then pull out the dust filter in the radian direction to clean the dust filter screen at the lower air inlet: gently pull the lower dust filter out from the dust filter bracket to clean the filter screen. Determine the location of the air inlet (hang up the air inlet of the air conditioner at the top of the machine, the air inlet of the cabinet air conditioner can be divided into left, right and lower air inlets, when cleaning the filter screen, you can use clean water below 40 degrees to rinse, if the filter screen is dirty, you can use a soft brush and neutral soapy water to assist in cleaning.

Residents on the ground floor can use water to flush the outdoor unit of the air conditioner, mainly the fin part of the outdoor unit, and other parts should not be washed with water without authorization. It must be cleaned once a year before use in summer or after use in autumn, and a comprehensive overall cleaning and maintenance should be done by a professional every 3 years. In addition, it is best not to let the air conditioner stop for a long time during the idle period, and it should be started once every one or two months, so as to avoid failure when it is turned on suddenly.

Summary. Open the lower half of the panel of the cabinet, buckle both sides of the panel to remove the panel, and then pull out the filters on both sides to remove it. Filter cleaning method:

Open the lid of the air conditioner and remove the filter. Use a clean filter brush to brush away any dirt attached to the filter. Rinse with tap water and wipe the filter dry with a soft, dry cloth.

How to remove the filter of Haier vertical air conditioner

Open the lower half of the panel of the cabinet, buckle both sides of the panel to remove the panel, and then pull out the filters on both sides to remove it. Filter cleaning method: Open the indoor cover of the air conditioner and take out the filter.

Use a clean filter brush to brush away any dirt attached to the filter. Rinse with tap water and wipe the filter dry with a soft, dry cloth.

Hello. I can't tear it down next to me.

What does the air conditioning look like.

I'll take a picture for you to see.

OK is to pick from both sides.

I can't pick out the bottom of the side.

I don't know if you see it, I can't push it in.

Use your hand to apply force from the top half of the lid outward to disengage the buckle.

Can you see the buckle.

I saw three, but the next one I couldn't pull out.

I can't lift it up and down it.

Pro, there are the following operation methods for removing the filter screen of Haier vertical air conditioner: 1. Unplug the power supply, power off the air conditioner 2, unscrew the screws with a screwdriver, remove the front panel of the air conditioner 3, push the filter out of the buckle, pull out the filter screen along the arc direction, and gently pull the filter screen of the lower air inlet from the bottom of the air conditioner. 4. Rinse the filter screen with water below 40 degrees Celsius, gently brush it with a soft brush, soak it in a neutral washing liquid for a while5, shake the water dry, and then let it dry naturally in a ventilated and cool place6, wipe the dust in the Haier air conditioner with a rag7, install the clean filter screen, and cover the panel.

The dismantling method is as follows:

1.Try to enter the dismantling according to the manual, and follow the steps below without the manual.

2.Open the air conditioner shell, pay attention to be careful, usually two small card slots are stuck, and gently pull the outer cover outward.

3.After opening the outer cover, you will also see that there are two buckles inside, and you have to gently pick open it to make the outer cover fully open.

4.At this time, you can take off the filter, the general filter is stuck in the card slot, you only need to push the filter up slightly, and the bottom will be out of the card slot, and you can take the past with a little hand drag.

Before disassembling the filter, for safety reasons, we first unplug the power socket, that is, do a good job of power-off. After the power supply is disconnected, slowly open the air inlet grille of the air conditioner, which is the shell panel of the air conditioner that we usually see, it is stuck by two bayonets, and it can be turned on with a little effort. After opening the panel of the air conditioner, we can see the filter, we gently push the filter up, we will see that its center will bulge, and then pull it down.

Now you can clean the filter, the filter of the air conditioner should generally be rinsed with water below 40 degrees Celsius, if it is dirty, you can use a soft brush to gently scrub it, or soak it in a neutral washing liquid for a while, do not use strong acid and strong alkali dish soap. After the filter of the air conditioner is cleaned, the water should be dried first, and then placed in a ventilated and cool place to dry naturally, and should not be exposed to the sun. During the drying process of the air conditioner's filter, we can use a rag to wipe the dust in the air conditioner, which is conducive to the use of the cleaned filter in a clean environment.

Finally, we can install the clean filter, after installing the filter of the air conditioner, we cover the panel, plug in the power supply, and you can use it with confidence.