How to deal with the paint How to deal with the paint of the car

The treatment method of the paint on the car surface is: 1. Spray the paint remover on the paint dirt part of the car; 2. After standing for five minutes, wipe the paint on the car with a rag; 3. Wipe with a hot towel dipped in alcohol; 4. Repeatedly stick and tear with transparent adhesive with good viscosity; 5. Dry with a hair dryer and scrape it off with your fingernails. The maintenance methods of the car body are:

1. Remove the dust on the car body in time to minimize the adsorption of dust by the static electricity of the car body; 2. Rinse the rain stains with water as soon as possible after the rain to avoid damaging the paint surface; 3. Do not wash the vehicle in the scorching sun or high temperature when washing the car; 4. Use a clean and soft cloth or sponge to scrub the vehicle to prevent metal filings and sand particles from being mixed to leave scratches.

If the rust is not very serious, you can use very fine water sandpaper dipped in water to gently grind away the rust spots, but do not grind in no direction, and polish in a straight line in the same direction. Wait until it is completely wiped off and apply a layer of primer. If it is a new scratch, wipe it off and apply the primer directly.

After that, if the vehicle is equipped with a small can of original paint, you can wait for the primer to dry, then smooth it with sandpaper and apply the original paint on top of the primer.

If you don't have the original paint, you can buy a touch-up pen and use it for coloring. Although this treatment is not as effective as going to a beauty salon, if it is a small or inconspicuous scar, it can also play a role in preventing the rust from expanding and aggravating.

Precautions for automotive paint repair.

It is recommended to put high temperature and UV-resistant wax on the car, and buy a set of car clothes to cover the car, which can effectively prevent UV rays from damaging the car paint.

When the car is driving on the highway, it will collide with some small bugs, and there will be some small flying insect corpses that stick to the car body and leave an oily substance if it is adsorbed on the surface of the car paint. Oily substances are strongly acidic and can chemically react with car paint and corrode car paint.

It is recommended to buy a paint pen to make up for it, 15 yuan can be bought, you can't take a serious look at it, you want to look good and go to the outside repair shop to repair the paint, **250 or so (for example, a door is counted as one side), the fourth son is more than twice as expensive, not recommended. Touch-ups are charged on a per-face basis, not on the size of the damaged area. Such as satisfied.

Dip a towel in banana water and gently wipe it on the paint spot, which can be used to dilute the paint, clean the paint spot has a good effect, and finally rinse it with water.

Of course, the maintenance of the appearance of the car is also an important part of the maintenance of the car, that is, the maintenance of the surface paint of the car. Car paint maintenance requires cleaning agents, brightening waxes, surface waxes, viscose removers and other automotive products as auxiliaries. Automotive paint maintenance needs to be insisted on to achieve better maintenance results.

Car Paint Repair Steps:

1. Touch-up pen to repair minor scratchesFor repairing car scratches, touch-up paint pen is the most commonly used method. And the cost of the touch-up pen is not high, and the cost performance is high. For small areas of minor scratches, it only needs to be applied to effectively solve them.

However, the touch-up pen also has certain defects, and with the loss of time, the car paint will fall off again in the position repaired with the touch-up pen.

2. Apply fine wax to reduce scratchesIn the method of paint repair, applying fine wax is also a very common method. However, there are certain limitations to applying fine wax. Applying fine wax is only effective for damage to the surface of the paint, and fine wax can significantly remove scratches on the surface of the paint.

3. The anti-rust effect of toothpaste repair paint is significant, and the damage of the exposed primer can be temporarily treated by applying toothpaste. Moreover, toothpaste can play a role in preventing rust and preventing secondary damage to the car paint, especially for white car paint.

How to construct wall paint to protect the finished product.

Before painting the walls, first clean the building areas, such as furniture, appliances, etc. They are better off moving elsewhere. If you can't move it, you have to protect the finished product, because during the application process, it will inevitably cause the paint to fall off, which can easily cause contamination and affect the aesthetics of use.

How to construct a foundation treatment of wall delayed mold paint.

Before the official construction, a full inspection of the wall is required to determine if the base is firm and level. If the coating of the rough wall is not strict, you must provide feedback to the property and allow the developer to make corrections. If the paint film peels off or cracks on the old wall, the wall must first be shoveled or the crack repaired with plaster.

The surface of the wall is free of dust, debris and flatness, and then the interface is applied to the surface of the wall. The construction must be meticulous and uniform. Once it is completely dry, you can move on to the next step.

How to construct a putty for wall paint.

Then you have to place putty and level the walls. This process is generally applied to putty twice, but it depends on the actual situation. After applying putty for the first time, it should be dried naturally, then sold out at a loss, and finally a second putty is applied.

In the structure, attention must be paid to the consistency of the scraper so that the thickness of the putty is uniform.

How to construct a wall paint.

The first is to apply a primer, which increases the adhesion of the top layer and prevents the walls from getting wet. After it has dried completely, the topcoat can be applied, and the topcoat is usually applied twice. Before painting, you have to match the layers to make the colors the same so that the color of the walls can be uniform while painting.

In the case of roller coating, it is necessary to use a thick roller coating for application, followed by thin rollers, so that the effect of the structure is better. However, it must be taken into account that the speed must be constant when using the roller and that it must not be slow and fast, so that the surface of the paint can be smooth and uniform.

How to construct a wall paint acceptance work.

After painting the wall, we still need to inspect and accept the wall after it is completely dry. This is done to observe if the surface of the wall is defective or cracked, and curses that the color is the same. If a problem is found, it should be fixed immediately.

If it is stained with solvent-based paint (such as Yongming paint, Sanbao paint, etc.), it should be immediately scrubbed with a cloth or cotton ball dipped in gasoline, kerosene or thinner, and then washed with a detergent solution. If it is stained with water-soluble paint (such as water-soluble paint, latex paint) and household interior wall paint, wash it off with water in time.

If the paint or asphalt is not contaminated for a long time and the dirt has not solidified, it can be washed with turpentine (or benzene and gasoline, etc.). For old stains (solidified), you can soak them in a mixture of ether and turpentine (1:1), wait for the stains to soften (about 10 minutes), then scrub them with gasoline or benzene, and finally rinse them with water.

If the clothes are stained with asphalt, you can first scrape off the asphalt with a knife, soak it in carbon tetrachloride (available in pharmacies) for a while, or rub it in hot water to remove it.

To remove stains such as paint or asphalt, you can still use 10-20% ammonia (you can also add half of the ammonia turpentine) or soak it in 2% borax solution, and then wash it after it is dissolved. The other method is to immerse in benzene or toluene, soak and then wash.

If the nylon fabric is stained with paint, it can be rubbed with lard first, then soaked with detergent and rinsed with water.

If the woolen clothing is stained with asphalt, it is difficult to wash it with soap or gasoline. The asphalt has not yet dried and solidified on the clothing, so it can be rubbed in turpentine or benzene liquid, then scrubbed with soap, and finally rinsed with water. If the asphalt has dried on the fabric, 1:

1. Turpentine and ether mixture, soak the asphalt in the clothes for 10 minutes, then take it out and squeeze it dry after rubbing, then wipe it with gasoline, rub it with soap, and finally rinse it with water.

You can use 1:1 turpentine and ether mixture, soak the asphalt in the clothes for 10 minutes, then take it out and squeeze it dry after rubbing, wipe it with gasoline, rub it with soap, and finally rinse it with water.

If there is paint on the paint surface of this car, this treatment is still very troublesome. If this is not handled well, it is possible that the family will not be able to damage the paint of the original car. You can use banana water to lightly wipe this area of paint to see if he can remove it.

If it is still this almost spike, in this case, you need to use this polishing machine to polish the position of this paint surface, if the paint on this is particularly much, and it is particularly thick, this is basically not easy to polish off. If the above is relatively small, use this polishing machine to polish the paint surface thoroughly, this can be disposed of.

1. Generally, gasoline is used, directly dip cotton yarn in an appropriate amount of gasoline, directly apply it to the parts that need to be wiped for 5-10 seconds, and then wipe it to Nayan.

2. Apply a small amount of wind oil essence to the paint stain, rub it until the paint falls off, and then clean it with water, which is better than gasoline, because the taste of wind oil essence is smaller. Dust Eggplant Feast.

3. Clothes can be wiped with a small amount of alcohol, if it really can't be done, use a blade to carefully remove the paint surface, and then wipe it with a solvent such as butyl ester or xylene.

It is necessary to take treatment measures for the wall base layer first, especially the dust and particulate matter on the surface should be treated in time. Before painting, it is necessary to ensure that the wall is smooth and clean. If it is an old house painting, the old wall skin of the wall should be removed to avoid affecting the effect of wall painting.

Related information: 1. If the cracks are well treated, you also need to scrape putty on the wall, usually two to three times. Before construction, the materials should be mixed well, the putty and water should be adjusted according to the proportion, and they should be stirred evenly.

During construction, you can use a scraper to apply scraping on the wall, so that the putty and the wall can be firmly bonded. During construction, it is necessary to start from top to bottom, one step in place, and do not repeat the painting to avoid affecting the beauty and flatness of the wall.

2. After the wall putty is dry, you can start to paint, pay attention to brush the primer first, which can enhance the moisture-proof property of the wall and prevent mildew on the wall. When mixing the primer, it is best to add some water to ensure that the wall is moist. After the primer is dry, then polish it again, and finally you can start the topcoat construction, and the topcoat does not need to be bent with water, otherwise it will affect the thickness of the paint film.

3. After all the paint is evenly blended, start to paint. Before painting, the primer should be brushed to prevent the wall from being damp, and it will take a while to wait after the primer is painted. Once it has dried completely, apply the topcoat.

Generally speaking, the topcoat should be brushed twice without being bored, and 5% water can be added to the first time, which can be easily absorbed by the wall. Brush the top first and then the wall, and brush the wall in order from top to bottom when the wall is poor.

The treatment method of the paint on the car surface is: 1. Spray the paint remover on the paint dirt part of the car; 2. After standing for five minutes, wipe the paint on the front of the car cover with a rag; 3. Wipe with a hot towel dipped in alcohol; 4. Repeatedly stick and tear with transparent adhesive with good viscosity; 5. Dry with a hair dryer and scrape it off with your fingernails. The maintenance method of the car body is as follows:

1. Remove the dust on the car body in time to minimize the adsorption of dust by the static electricity of the car body; 2. Rinse the rain stains with water as soon as possible after the rain to avoid damaging the paint surface; 3. Do not wash the vehicle in the scorching sun or high temperature when washing the car; 4. Use a clean and soft cloth or sponge to scrub the vehicle to prevent metal filings and sand particles from being mixed to leave scratches.

1. Use turpentine to remove the sticky paint from the clothes.

Turpentine can dilute the rosin component of paint, usually used to remove the preferred material of paint, just take turpentine and apply it to the paint, scrub it like washing clothes, you can rub the paint off from under the clothes, but turpentine itself is also an oil, and there is a peculiar smell, after cleaning the paint, you also need to use laundry detergent to remove turpentine and its odor.

2. Nail polish remover to remove paint.

Nail polish remover is used by girls to remove nail polish, but its main ingredients, ethanol and acetone, can dissolve paint well and soften it, so that it is easy to remove. If the paint area is small, the effect of nail polish remover is still very good, and nail polish remover generally has a faint fragrance, and it will not stain the clothes with an unpleasant smell after removing the paint.

3. Cool oil to remove the paint.

If there are no other items at home to remove paint, it is also good to use cool oil to remove small areas of sticky paint, the method is to apply it to the paint, let it stand for a few minutes, and then brush it off with a brush, if there is still a residue, repeat it 2-3 times.

1. Cooling oil.

Start by determining the type of paint. If it is an ordinary water-soluble paint, it can be removed directly with water. If it is a non-water-soluble paint, you can apply cool oil directly to the paint-stained area, let it sit for a few minutes, wipe it with a cotton ball along the fabric pattern, and then rinse it with water.

2. Alcohol or other solvents.

Alcohol is not useful for all paints. It can only wash off water-based paints. For general paints, it is best to use solvents such as gasoline, glana, xylene, cyclohexanone, butyl ester, etc. 3. Liquor + alcohol.

If you get latex paint, you can use a 60-proof liquor or a mixture of 8:2 alcohol (95%) and water to soak the white latex stains on your clothes, soak them for half an hour, then rinse them with water until they are washed, and finally rinse them with clean water.