What to do with clematis zombie seedlings? What to do if clematis sprouts wither

Take a look at the air permeability of the soil, the air permeability is not good to change the soil, the pot may be too small, the root system grows together, when changing the pot, the part of the root system that is too long should be cut out and replanted.

Second, it is necessary to see whether it is due to the rapid change of temperature, causing slow growth, some seedlings do not grow leaves, it may be caused by temperature changes, you can add some slow-release fertilizer, replenish energy, and restore growth.

Clematis is suitable for neutral or weakly alkaline soil, can be mixed with some sandy soil, should not use clay, it is best to mix some organic materials to ensure air permeability.

Fourth, the substrate must be sterilized.

Repotting, carefully break the soil a little bit so as not to hurt the roots, or wash off a little of the soil with water to expose part of the roots.

Replace with new soil, peat and perlite, and replant.

You can spray a little brassinin appropriately to promote seedlings.

Clematis zombie seedlings refer to the growth disorders and even dormancy caused by changes in the humid and hot environment, climate, soil quality, etc., just like people who stay up all night and cannot recover every few days. Workaround:

If it is a potted plant, 1Loosen the soil, pour out a small part of the old soil, and do not hurt the clematis root system.

Add new soil and replant.

Spraying brassinin to promote seedlings.

If it is planted in the ground, loosen the soil, do not hurt the root system, and reduce the amount of fertilizer.

The wilting of clematis sprouts is mainly caused by improper maintenance, and if it is caused by insufficient moisture, it is necessary to replenish the clematis in time. If it is caused by root damage, water and fertilizer control are required during the maintenance period. If it is caused by too much light, it needs to be moved to a cool and well-ventilated location for maintenance.

If it is caused by too much fertilizer, it needs to be watered, which can dilute the fertility.

Clematis is a vine of the family Ranunculaceae, and if there is not enough water, new shoots will wilt. Clematis has insufficient water, and after the new shoots wither, it is necessary to remove the withered buds and replenish water to the clematis. Clematis is very sensitive to water, watering should be moderate, try to keep the soil moist, to avoid stagnant water, damage to the root system of clematis.

Clematis likes moisture, is afraid of waterlogging, too much watering will make clematis rot roots, too heavy action during repotting or transplantation, the root system of clematis will be damaged. When the root system is injured, the absorption capacity is reduced, and the new shoots of clematis will wither. After the root system of clematis is damaged, it is necessary to control water and fertilizer, and put it in a well-ventilated location for a period of time.

Clematis is not tolerant to strong light, and during the growth period, the light is too strong, and the clematis will get sunburned under the scorching sun, and the leaf buds will wither. After clematis is exposed to strong light, the withered leaf buds need to be removed, and then the clematis should be moved to a well-ventilated indoor location for maintenance. Proper watering is required during the maintenance period, which is beneficial for clematis recovery.

Clematis needs to have sufficient fertilizer during the growth period, and the nutrients are sufficient, which is conducive to the growth of leaf buds, but it is necessary to fertilize in moderation. In the case of more fertilizer, the leaf buds of clematis grow poorly, and there will be wilting or rotting. If you fertilize too much, the leaf buds of clematis will wilt, and you need to water clematis, which can dilute the fertility.

There are many reasons for the zombie seedlings of clematis, which are related to the root system, soil, flower pots and light. If the root system is damaged, the young leaves of clematis need to be pruned properly. If it is caused by unsuitable soil and pots, it is necessary to replace clematis with soil and pots with good ventilation and drainage properties.

If the light is too strong, it needs to be moved indoors.

Clematis seedlings are prone to stiffness after planting, which may be related to root system, soil, flower pots and light. If the root system of clematis is damaged, the branches and leaves of clematis need to be properly pruned. Cutting off 1 2 leaves and the top stem near the root of clematis can concentrate nutrients and is conducive to the recovery of clematis.

The soil permeability is poor, the root system of clematis grows poorly, and the phenomenon of stiff seedlings will appear. If clematis seedlings are caused by soil discomfort, it is necessary to replace the soil for clematis in time. During the curing period, clematis can be given loose, fertile, breathable and well-drained soil, and then placed in a cool and ventilated environment.

The pot is too large, the air permeability is poor, and the root system cannot breathe and grow normally, which will make the clematis stiff seedlings. If it is caused by unsuitable flower pots, it is necessary to use a flower pot of appropriate size and good breathability for clematis. Before transplanting clematis, the pots need to be disinfected to reduce the chance of clematis being attacked by pests and diseases.

Clematis needs to be slowed after transplanting, and it is not recommended to keep it outdoors for maintenance during the seedling slowing period. The root system of clematis is not adapted to the new soil, the growth ability is slow, and the outdoor sunlight is sufficient, which will affect the growth of clematis and make it easy to stiffen the seedlings. If it is caused by too much light, it is necessary to move the clematis to a cool room for maintenance in time.

Clematis stiff seedlings, may be planted pot soil is too large, affecting the growth of the roots, need to replace the pot soil for clematis and replant, or it may be too early, resulting in the plant can not adapt to the environment, need to prune the clematis to help the plant slow down the seedling, or it may be exposed to strong light exposure, need to shade the clematis.

1. Replace the potting soil

Clematis seedlings may be planted with potting soil is too large, and the size of the plant is small, resulting in the roots can not grow normally, at this time, it is necessary to replace the potting soil for clematis and replant, it is best to use the potting soil similar to the plant size to plant clematis, and in the process of maintenance, change the potting soil every other year.

2. Prune

Clematis zombie seedlings, or in the case of the plant without slow seedlings, pruning it, causing clematis to stop growing, at this time it is necessary to prune the plant, use sharp scissors, cut off all the branches of clematis, leaving only two leaves close to the roots, wait for a period of time, the plant will resume growth.

3. Shading treatment

Although clematis has a certain need for light, but in a strong light environment for a long time, there will be a phenomenon of stiff seedlings, at this time, it is necessary to move clematis into the astigmatism environment, and spray water on the leaves of the plant, reduce the temperature of the leaves, wait for the clematis to resume growth, and then move it into the astigmatism environment for maintenance.

4. Scientific fertilization

Clematis stiff seedlings, may also be excessive fertilization, resulting in fertilizer damage to the plant, at this time it is necessary to water the soil unpolluted water, dilute the fertilizer content in the soil, if the fertilizer damage is too serious, resulting in damage to the roots of the plant, you need to dig out the clematis, soak it in carbendazim solution, wait for the wound to heal, and replant.

Clematis is also called clematis peony, which blooms many times and is easy to take care of, and can grow well without pruning or fertilizing in time. However, it is still necessary to pay attention to maintenance when planting to avoid the phenomenon of stiff seedlings not growing.

First, look at the air permeability of the soil, the air permeability is not good, this rent to change the soil, the pot may be too small, the root system grows together, when changing the pot, the part of the root system that is too long should be cut out and replanted.

Second, it is necessary to see whether it is due to the rapid change of temperature, causing slow growth, some seedlings do not grow leaves, it may be caused by temperature changes, you can add some slow-release fertilizer, replenish energy, and restore growth.

Clematis is suitable for neutral or weakly alkaline soil, can be mixed with some sandy soil, should not use clay, it is best to mix some organic materials to ensure air permeability.

Fourth, the substrate must be sterilized.

Zombie seedlings are generally the root system in addition to the problem, so the first thing is to take the flowers out of the pot to observe, remove the diseased, weak, and old roots, and then soak carbendazim solution to dry.

The second step is to change the soil, because the zombie seedlings are also likely to be the original soil quality is not good, the original soil is compacted, not loose and breathable, impermeable, there are germs or no nutrients may lead to stiff seedlings, the original soil is replaced with loose and breathable nutrient and disease-free soil, such as nutrient soil or peat soil plus perlite, humus soil plus river sand and perlite, add a certain amount of particles to make the pot soil more loose and breathable, and at the same time mix some bactericidal insecticides.

The third step is fertilization, according to the potted plant itself to apply the appropriate fertilizer, thin fertilizer and frequent application.

Soil is not suitable If the soil used is acidic, it will cause the clematis to grow slowly and not bloom. If this happens, it is best to neutralize the pH of the soil by applying plant ash to make the soil alkaline, and if it is not alleviated, then the potting soil needs to be replaced. Therefore, when sowing clematis, it is necessary to choose a suitable alkaline soil.

Insufficient light If the light is not enough, clematis can not only reduce flowering, but also the flower color is not bright, or even do not bloom. If this is the case, we can make clematis bloom by increasing the light. Ensuring 6 hours of light a day can make clematis bloom brightly and bloom more.

Clematis is very sensitive to water, if there is too much water, the soil is too wet, black rot and rotten roots will appear, if the water is too small, it will not meet the growth of clematis. Watering every 3 or 4 days, and watering needs to be appropriate, "not dry, not watered, dry is watered thoroughly".

Fusarium wilt generally occurs in spring and summer when it is rainy, and it is especially likely to occur after days of rain and sunshine. In addition, if the soil of the ground plant is not well drained, the potting soil of the potted plant is not well permeable, and the condition will be aggravated.

If only part of the branches wilt, cut off the wilted branches; If the whole plant withers, it is cut off completely, leaving only the roots, which sprout new shoots and grow new branches. After that, it is watered with a fungicide for sterilization.

Fusarium wilt is difficult to treat, and even if it is rescued, the recovery time is very long, so its prevention and control should be based on prevention.

1. Choose disease-resistant varieties.

The large-flowered series is prone to blight, while the evergreen group, the Ashkenazi bell series, the long-petaled series, and the Montana series are almost non-occurring.

2. Strengthen the ventilation and breathability of the roots.

Add more particles (vermiculite, perlite, etc.) to the soil to enhance the permeability of the soil. It is recommended to choose a clay pot with good air permeability for potted small iron.

3. If it is a small iron for indoor maintenance, pay attention to ventilation and avoid stuffiness.

4. For small iron planted outdoors, it is recommended to build a shed to shelter from the rain in continuous rainy weather.

5. Regular use of pesticides for prevention, and the use of fungicides once a month can effectively prevent the occurrence of land dust blight. When the soil is dry, it will be used for watering, and the medicinal effect will be better.