Is it OK to use a license plate holder for a car license?

The car license plate needs a license plate holder, otherwise it is easy to be punished for covering the license plate.

Regarding the requirements for license plate holders, in fact, the "Road Traffic Safety Law" and the "People's Republic of China Motor Vehicle Number Plate" (GA36-2007) are stipulated:

1. The license plate holder can be used to assist in the installation of license plates, and the inner edge of the license plate frame should be greater than 5mm from the edge of the motor vehicle registration number character.

2. The license plate holder here should be a fixed license plate frame, which protects the license plate and does not affect the number plate character recognition, excluding the external lock, built-in lock, electronic automatic shielding and replacement and other movable license plate racks that are easy to replace and disassemble, and the use of detachable movable license plate racks and reversible license plate racks is not allowed.

3. The outer frame of the motor vehicle license plate frame shall not have signs, letters, decorative patterns, and shall not cover the characters of the license plate, otherwise it will be regarded as an illegal act involving a license plate and a certificate.

In other words, as long as the inner edge of the license plate holder is less than 5mm from the edge of the license plate character, it is considered to be a shield license plate.

Regulations on the Application and Use of Motor Vehicle Driver's License" stipulates that if a motor vehicle driving on the road does not hang a motor vehicle number plate, or deliberately covers, defaces, or does not install a motor vehicle license plate in accordance with the regulations, 12 points will be deducted at a time.

License plate rack, asked the traffic police at the beginning of this year, said that the use of license plate racks is not allowed, because the license plate holder blocks the white edge on the outer edge of the photo, at that time said that this year's eleventh will begin to investigate, for the license plate rack of vehicles to punish, and then the matter is over. After eleven, it was not investigated.

It is estimated that the license plate holder will be dismantled again one day. If you don't use that thing, you can't use it, it's really useless.

The screws and buckles of the license plate are one-time and cannot be removed. When it must be demolished, it must be demolished destructively, the so-called anti-theft.

You'll have to figure it out yourself. Because the screws are to be fixed with the car, this has to be disassembled to destroy the car body, you are afraid that one day you may have to disassemble the license plate, the screws have to be matched by yourself, and you can't use the anti-theft screws of the vehicle management office. When the license plate is put on the screw, the seat of the buckle is first worn, and then the license plate is worn, and the screws are screwed to the car, and after checking and fixing, the small cap of the buckle is buckled, and the small cap buckle can be anti-theft.

In the future, once the license plate is to be removed, the buckle must be broken to expose the head of the screw.

Yes, it can be installed.

According to the People's Republic of China motor vehicle license plate (GA36-2007) installation D) provisions: when using the license plate holder to assist the installation, the inner edge of the license plate frame is greater than 5mm from the edge of the motor vehicle registration number character;

The license plate holder can be used to assist in the installation of license plates, and the inner edge of the license plate frame should be greater than 5mm from the edge of the motor vehicle registration number character. For the license plate with the installation of the fixed sealing device, the distance between the frame and the license plate identification should not be less than 5 mm, and it should not be a big problem to just cover the white border of the license plate.

The distance between the white line of the border on the regular license plate and the edge of the character of the registration number is more than 5 mm, so just covering the white line of the license plate border will not be deducted points.

The license plate holder mainly plays the role of fixing the license plate, protecting the license plate, protecting the body, preventing the body from being injured by the license plate, and then installing anti-theft screws on the license plate rack can also achieve the role of anti-theft, and some imported car license plate installation holes are not the same as the domestic license plate installation holes, and the license plate holder can also play a role in compatibility with the installation of imported car license plates.

It is illegal to install a motor vehicle number plate in accordance with the regulations, a fine of 200 yuan and 6 points will be deducted.

Legal basis: Road Traffic Safety Law of the People's Republic of China

Article 95 Where a motor vehicle driving on the road does not hang a motor vehicle number plate, does not place an inspection mark or an insurance mark, or does not carry a driving license or driver's license with the vehicle, the traffic management department of the public security organ shall detain the motor vehicle, notify the party concerned to provide the corresponding license plate or sign or go through the corresponding formalities, and may be punished in accordance with the provisions of Article 90 of this Law. Where the parties provide the corresponding licenses or signs or go through the corresponding formalities, the motor vehicles shall be returned in a timely manner. Those who intentionally cover up, deface, or do not follow the provisions to install motor vehicle number plates shall be punished in accordance with the provisions of Article 90 of this Law.

Article 90 A driver of a motor vehicle who violates the provisions of road traffic safety laws and regulations on road traffic shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. Where this Law provides otherwise, punishment is to be given in accordance with the provisions.

The license plate frame needs to be installed

There is no hard and fast rule on whether the license plate frame (also called the license plate holder, license plate holder, and license plate frame) is installed or not.

The new traffic regulations in 2013 have stricter requirements for license plate frames, in fact, they are more advocating not to use the fancy frame of Zhaoqing orange. According to the regulations, the installation of motor vehicle license plates can be directly installed on the car body, or through the standard license plate rack installation license plate, provided that the license plate frame of the clan can not be disassembled at will, and the screw cap should be sealed with a solid sealing device with the words "Yue A" for example, to prevent it from being disassembled at any time.

The license plate holder shall not use an external, built-in lock, electronic automatic shielding and replacement type and other movable photo racks that are easy to replace and disassemble. At the same time, the outer frame of the motor vehicle license plate holder shall not contain signs, letters, decorative patterns, and shall not cover the number plate characters. The inner edge of the license plate holder is greater than 5 mm from the edge of the motor vehicle registration number character.

In 2013, the new "Regulations on the Application and Use of Motor Vehicle Driving Licenses" clearly pointed out that the front and rear license plates of each motor vehicle must be installed with 8 new license plates, and 4 at the front and rear, but "except for those restricted by the vehicle's own conditions". Failure to install a license plate seal in accordance with the regulations will result in a heavy fine of up to 12 points. That is to say, if it is limited by the conditions of the vehicle, such as the installation position of the front number plate is suspended, only the above two fixed sealing devices need to be installed.

This is the case with models such as Chevrolet Classic and Peugeot 307, and the two fixed sealing devices under the front license plate cannot be installed in the difference book, and can not be installed.