-
Mine is also Yingtai is AMD FX5000's, the core is successfully opened, the small super main frequency, and it's OK to play general games! I turned on the computer and saw that the motherboard showed that there was f4 and f3. Press it and it will automatically turn on!
-
This board does not support open cores on the hardware, so you don't have a chance.
-
Press the DEL button to enter the motherboard BIOS settings at boot, find the advanced menu to enter, and then enter the CPU configuration submenu, at this time we can see the relevant information of the AMD X3 435CPU processor, which shows the dual-core processor, and there is an Advanced Clock Calibration menu at the bottom of the page, which is often referred to as ACC. This ACC clock check is a CPU advanced clock quasi-technology, which is used to improve the amplitude and stability of CPU overclocking, and is also the key to opening the processor's shielded core. Go to the Advanced Clock Calibration submenu and change the original default setting Disabled to Auto, so that the ACC function is enabled.
-
On the official website of Yingtai**, put the BIOS of your motherboard model, put it in the root directory of the USB flash drive that is less than 2G, press F12 when you boot up, and then select the file you entered and press enter again, restart OK after brushing! A770E.
This may be a problem with your hard drive, remember to load the default settings after flashing the BIOS!
-
2. Reboot to DOS mode and switch to D drive.
3. Enter the AWDFLASH file after the DOS prompt), press Enter.
Press N (do not save the BIOS file), Y (OK to refresh), and press F1 to restart when the progress bar is completed.
4. The whole process cannot be powered off.
-
。。There are a variety of specifications and models of motherboards, some chipsets support open cores, and some do not. Report the brand and model of the motherboard, and only then do you know whether the chipset specifications support open core.
-
Advanced Clock Calibration ASRock motherboards are the workhorses of open cores :)
-
Hello landlord! Don't know which one of your CPUs is AMD? Some of them can't be opened!
First of all, find the ACC (Advanced Clock Calibration) option in the BIOS, modify the original default setting Disabled to Auto, so that the ACC function is turned on, after the core is opened, use CPU-Z to detect the following, make sure that the core is successfully opened and then run for hours or, test the stability! However, there is a certain risk in opening the core, because the core of the shielding is the defective goods that do not meet the requirements! What questions can you continue to ask!
-
Yes, Yingtai770E3 has an open-core function, overclocking extremely, single and double quad-core, support open-core, single-open-double, dual-open-four, three-open-four, up to x640 quad-core.
Speaking of performance! Stable! Definitely the boards of the Yingtai Tpower i45 Yingtai T series are better! >>>More
Look for it in the library, there should be.
1. Information on the official website of Yingtai: support dual-channel DDR2 -1066 800 667 533 >>>More
Yingtai motherboard boots from the USB flash drive:
1: Press the power on button, and the power on interface appears. >>>More
1Gx2 dual channel is better for G, 2Gx2 dual channel is better for 4G; But now a single 2G is not expensive, so buy a single 2G to facilitate upgrading to 4G in the future >>>More