Does Yingtai computer motherboard I91GL M7 support 1G memory module?

Yes, you can use DDR400 memory modules, which can support up to 4G

Please, on the first floor, is there any DDR4 memory now?

Yes, the early ones are DDR's.

This board does not support DDR3. If you go to the computer city to Taotao, you can only go to DDR2. When the board itself was designed, DDR3 was not considered. I'm sorry for the news.

This is a G41 board that does not support DDR3 memory.

Memory slots: 2 DDR2 DIMMs

Maximum memory capacity: 8G

Memory description: Support dual-channel DDR2 1066 (overclocking) 800 667MHz memory.

No, your motherboard can only use Gen 2 memory, not Gen 3 memory.

Yingtai P4M80-M7 The memory slot is DDR1 generation,,The memory currently on the market in Burning Town,DDR1The maximum is only 1G,You can buy a DDR1 can be excited,**In more than 200 yuan,It's no problem to upgrade and have a rough skin。 As a reminder, the mainstream memory modules are now DDR3 1333, and your computer is indeed outdated.

You buy a 2G DDR2 800MHz memory set dual channel.

Plug it in, it's automatically recognized, don't worry, don't worry.

Automatically recognized, just plug it in. There are several slots. And if you buy a memory module, you can buy a 2G one.

As soon as you buy the memory, plug it in. It will be automatically recognized, so you don't have to worry.

Your motherboard supports up to 8G, which can be identified as long as it doesn't exceed that.

Buy the same DDR2 800MHz on it.

Recognizable.

Maybe it's not compatible, but besides, your original 512 is the same, is the frequency the same? Unplug the 512 and try it alone with the 1g one.

Nonsense, it's automatically recognized after adding memory.

It may be that the motherboard BOIS is too old, and it can only be recognized as 512M.

A refreshed bois would be fine. Look at your motherboard is pretty old.

After adding memory, you need to redo the system.

Yes, but it seems that it can only support up to 4G of memory, and it has to be 533.

There are words on the motherboard.

One is the Tforce 6100

The other is GF6100-M7

No, but you can't with overclocking.

Of course you can, without overclocking.

Reasonable, depending on what to do, you don't need a discrete graphics card, but it is reasonable to need 2G memory.

If the graphics card doesn't work, it won't restart, but it will freeze or the screen will be blurred. The G41 integrated graphics card should be enough to play CrossFire, and the reboot may be a hardware problem, so it is recommended to find the reason in the power supply.

It's a hardware problem, it has nothing to do with the integrated graphics card, G41 is more than enough to play CF! Let's take a good look at the hardware compatibility, I hope you will adopt it.

Yingtai P4M800 Pro-M7

Supports the memory transfer standard DDR2 533

Supports a maximum memory capacity of 2GB

You advanced the BIOS to manually adjust the memory clock to 533

Save to exit.

over

The maximum amount of RAM supported by this motherboard is 2G. The model that supports memory is DDR2 533.

1.You see if the models of the 2 memories are the same, and whether there are incompatible problems, 2Swap the positions of the two memory inserts to see if the capacity has changed, if there is a change, it is estimated that there is a problem with one of the sockets.

The frequencies of the two memories are not the same, and the high-frequency ones should be used by BIOS downclocking.