-
Usually as long as you press the power button to automatically turn on, the power button is generally in the upper left corner, there are also in the upper right corner, and there are on the left or right side of the computer, not a button, but a key that needs to be pushed up and down.
1. Different models of notebooks have different settings for the buttons, and some models of notebooks directly set the insert key.
2. Some laptops.
It is a combination of the insert key and the page down key.
You need to press the F1 key to enter the boot, mainly because the settings in the BIOS do not match the real hardware data, which can be divided into the following situations:
1. In fact, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, which leads to pressing F1 to continue;
2. I originally hung two hard disks, and set them as dual hard disks in the BIOS, but when I removed one of them, I forgot to change the BIOS settings back, which will also cause this problem;
3. Motherboard battery.
The failure to run out of power will also cause data loss.
4. Reboot the system, enter the BIOS settings, and find that the floppy drive is set to, but in fact there is no floppy drive in the chassis, set this item to none, troubleshooting.
Reasons and solutions for laptop not turning on:
1. Excessive use of the laptop or excessive power consumption of the standby battery for a long time will cause the power supply of the laptop to be insufficient, and it is recommended to charge more before use to solve this problem.
2. There is no reflection when the hardware is loose or the laptop is flooded. If the hardware is loose, open the notebook and reinsert the loose hardware; If the hardware is damaged, it is necessary to replace the damaged hardware after testing with a professional instrument.
3. The hardware is loose or the COMS data is wrong, resulting in a prompt that the serial port and parallel port cannot be recognized when the machine is turned on.
Hard disks, etc., need to be troubleshooting by reinserting and unplugging loose hardware and restoring COMS data.
4. The computer alarm cannot enter the system. Whenever the computer starts up, it sounds "Flute." The alarm sound of the "flute" is caused by hardware error or damage. This kind of fault needs to be repaired according to the different alarm sounds.
5. The operating system cannot be started. This type of problem is always reflected in a system boot error or reboot after the hardware detection is completed, and the solution is to restore the system or reinstall the system.
-
It is recommended to press and hold the power button until the laptop is powered off, and then restart it to see again.
The boot key of a laptop is usually a separate button at the top of the keyboard, and there is also a button in the upper right corner of the keyboard.
Some laptops have a power on button on the side.
-
Pay attention to looking for a sign like this, which is the power button.
Usually this kind of boot sign is on the left and right corners of the laptop after it is opened, or in the middle position, <>
-
The computer is powered on by pressing the power button (power button), and the power button (power button) is generally the computer on the left side of the main chassis, and if it is a notebook, it will be in the upper left corner of the notebook keyboard, of course, there are also in the upper right corner. Today, I'm going to tell you a detailed introduction to how to turn on the computer and press which key, let's take a look.
1. Laptop.
The power button is on the right side of the keyboard, and you can turn it on by clicking the power button directly.
2. The boot button of the laptop is above the keyboard, and you can also turn it on by clicking it directly.
3. The boot button of the desktop is generally located on the host, which may be directly in front or above, and you can turn it on by clicking it.
4. There is also a kind of laptop computer is that the boot button is located in the upper left or upper right of the computer keyboard, and you can click to turn on the computer.
-
The power button on a laptop is generally at the top left, right, or right of the keyboard.
The logo of the power button is basically the same, as shown in the figure below
-
1. Generally speaking, the shutdown key of the laptop is at the bottom of the screen, the top of the keyboard, the shutdown key of some laptops is in the upper right corner of the keyboard, the shutdown key of some laptops is in the upper left corner of the keyboard, and the shutdown key of some laptops is on the right or left side of the keyboard.
2. Laptop skills: When using a laptop, if the user wants to shut down, he can directly press the shutdown button of the laptop, that is, the power button.
3. In addition, the user can also shut down the operation by pressing the button, just press the alt key + F4 key of the computer on the computer desktop, and then you can enter the computer shutdown interface, the user only needs to press the enter key, that is, the enter key.
4. In addition, the user can also use the win+x key directly to choose to shut down, specifically only need to press the key combination, the user then press the U key twice in a row, and then the computer will realize the shutdown operation, which is also more convenient.
5. Data development: laptop, referred to as notebook, also known as "portable computer, laptop, handheld computer or laptop", its biggest feature is that the body is small, compared with the PC is easy to carry, is a small, easy to carry personal computer, usually weighs 1-3 kg.
View more and more contents.
win10 open camera operation:
3. After turning on the camera, we can take pictures or video operations. >>>More
Right-click on the desktop and select Personalization.
Pressing the power to shut down is an illegal shutdown, occasionally it's okay, at most the system is damaged and can't be turned on, then it needs to be reinstalled. If this happens often, the hard drive will be damaged, so try to avoid such a thing.
At present, ASUS** cooperates with Youde.com to launch the "old for new service" (brand is not limited), **old machine can be exchanged for ASUS** vouchers and cash, and the vouchers are used for ASUS** to purchase goods. >>>More
1. The sound file is corrupted when exiting Windows.
The first thing you can do is determine if the "Quit Windows" sound file is corrupted - open the "Control Panel", open "Sound" and cancel the "Quit Windows" sound. If Windows shuts down normally, the problem is caused by quitting the sound file, and you can fix this by restoring the sound file from a backup or by reinstalling the program that provided the sound file, or by defining "quit Windows" as silent. >>>More