How to make a school s computer set up a local area network?

You are **Internet,Your school is set up**software,So you can enter an account and password to go online,Because your school also belongs to a local area network,It's just a large area network composed of small local area networks,So you play in it is of course faster than the outside network to play。 Because the LAN is theoretically 100Mbps, even after some switches and hubs, there is an internal access speed of about 10Mbps. But the external network is different, if you divide it internally, one person is twenty or thirty kbps traffic is good, and many movies need to use P2P technology to grab multi-threaded traffic.

No matter if you go to the server on the Internet, or people from the Internet come into your server, there will be some cards. Normally, you can also form an internal network, but your school computer must be in the same IP segment, or you need to use a router to connect to the switches in different dormitories. This is usually very difficult to do because the school usually won't let you do it.

But if you want to have a network segment, for example, if you have both, you can form an intranet, and x is a variable, from 2 to 254

Oh, it's a principle of radio and television network, your computer first goes through the switch, then enters the network center for authentication, and then enters the Internet.

Optical fiber + LAN: referred to as FTTB, using optical fiber Ethernet technology, fiber to the floor, five types of twisted pair to the home. Sharing 100Mbps bandwidth, easy installation, customers only need to install a network card on the computer for 24-hour high-speed Internet access.

It has the advantages of high bandwidth utilization, low investment cost, and convenient network upgrade.

The school computer is connected to a part of the computers through a large switch, and the school network is program-controlled, and all users are connected to the network through the program, so theoretically speaking, it is possible to connect to the local area network, but it is necessary to start from the school's programmable computer, so in terms of feasibility, it is unlikely.

If you want to build a LAN, then you must assemble a virtual LAN, which must be set up in the router, and you definitely have no power to set this setting. Haofang software simulates this process, in fact you are not in a LAN at all. Only a few computers that share a switch or hub in the same dormitory are actually in a local area network.