What to do if European style solid wood furniture changes color when it encounters hot things

Solid wood stuff just can't be placed around something too hot, it's part of maintenance, and if it changes color, you have to get the paint off and then spray it again.

If you have petroleum jelly oil at home, you can wipe it on a tissue or soft cloth. Press and hold the white mark and wipe it repeatedly until it is no longer obvious. After two days, gently wipe it with a clean rag.

Solid wood furniture will be affected by thermal expansion and contraction, which will affect the paint properties on the surface of the furniture, so it will cause discoloration. It is best not to touch things that are too hot for solid wood furniture, and if you have to put it, it is recommended to put a crystal pad on it, and then put a heat insulation pad on it. These things are easy to buy in furniture stores, and they are not expensive!

Reasons: 1. Excessive addition of curing agent.

Solution: Reduce the use of hardener.

2. Use color paint that is easy to fade.

Solution: Replace with high-quality paint.

3. High temperature drying and discoloration.

Solution: Place in a place with a low temperature.

If it is not serious, it can be spraypainted. If it is severe, it needs to be replaced, and if it is a dining table, it is better to place a layer of insulation.

Spray it directly with a blend of the same color, but it is difficult to match the color, so be careful not to put hot things directly on top of the furniture in the future.

It can be refurbished, repainted, and covered with previous paint. You can also choose to scrape, but it is not recommended to try it, after all, it is very harmful to solid wood furniture.

European-style solid wood furniture generally has this problem, so try to avoid it.

If you change color, you can only re-paint it, or decorate it with something, and you will have to pay attention to it when you put things in the future.

Try not to let it change color, pay attention to protection, if it does change color, you can only refurbish.

When you encounter something hot and discolored, you can only re-color it and try to avoid being exposed to the sun, which will also be better.

Some solid wood furniture is afraid of heat, so it is recommended to lay a heat-proof partition!

To clean solid wood furniture, the main requirement is that the detergent is neutral, so as not to cause discoloration of the wood.

The most convenient cleaning agent for cleaning solid wood furniture at home is Washing Ling. Close to neutral.

If you are more particular, you can use a special cleaning agent for wood - natural soap horn wood cleaning agent.

For maintenance after cleaning, if it is a household, there are two products to choose from. If it's carved wood, you can choose orange oil. If it is wood without carving, you can choose natural wood wax. It's all very convenient to use.

Many solid wood furniture has undergone a strict drying process before leaving the factory, but this does not mean that it can be left without moisture. To deal with the water droplets on the wooden furniture, you can dip the dry cloth in a special wood furniture cleaner, which can form a protective film on the surface of the wood furniture, and prevent water vapor from penetrating into the interior of the wood furniture to a certain extent.

Solid wood furniture is also susceptible to moisture, and the wood is easy to swell and mold when wet. In this case, you may wish to put a soap in a musty area, or put the dried tea residue in a gauze bag to help eliminate the musty smell.

There are two main causes of discoloration after solid wood flooring is installed: one is discoloration due to ultraviolet radiation, and the other is discoloration due to moisture. And how to solve the problem of discoloration of solid wood, it can be said that it is fundamentally unsolvable, it can only be said that after paving, these two reasons for discoloration should be prevented as much as possible.

1. The discoloration of wood is mainly caused by absorbing ultraviolet light, and the degree of discoloration of the sapwood and heartwood after absorbing ultraviolet light is different, which will lead to a certain color difference in the paved floor. Therefore, the paved floor should not be exposed to the sun for a long time, and the necessary shading measures should be taken appropriately.

2. The ground is uneven, there are uneven small pits, after the floor is paved, the moisture-proof film is broken, resulting in breathability, a large amount of moisture from the damaged place into the parquet, resulting in a sharp increase in the moisture content of the floor, the dissolution of some soluble substances in the wood and the action of some color-changing bacteria, resulting in discoloration of the wood. The measure is to scrape the floor flat before installation. The moisture-proof film should be glued tightly with tape, preferably with a width of more than 60mm plastic tape, to ensure that the moisture-proof film is not breathable.

3. Before the geothermal floor is paved, the moisture content of most of the ground is about 20%, and in the process of floor paving, due to the damage of the moisture-proof film, a large amount of moisture enters the floor from the damaged place during geothermal heating, resulting in a sharp increase in the moisture content of the floor, and the dissolution of some soluble substances in the wood and the action of some color-changing bacteria, resulting in wood exhaustion or blueness. In some cases, in wet areas such as bathrooms and kitchens, the influence of external moisture can also cause discoloration of the floor in some places.