Hyundai Langdong can t be put in gear when it s hot, the clutch can t be stepped on, and it can be n

Updated on Car 2024-08-10
9 answers
  1. Anonymous users2024-02-15

    Exhaust the clutch cylinder and let the oil flow out for two or three seconds before tightening the screws and it can be used.

    Place the forefoot on the clutch pedal and press all the way down. Hold on to it, and feel the most comfortable spot on the forefoot. Dangling heels.

    Lift your leg and slowly release the clutch.

    Note that the heel fulcrum is not needed at this time, and the suspended heel allows the leg to follow the elastic force of the clutch freely**. When you feel the engine start to shake, keep the forefoot no longer ** the legs and quickly press down on the heels. Remember that the heel pivot point is accurate and effective at this point.

    Precautions: 1. The correct posture of stepping on the condenser is to step on the pedal of the condenser, and the heel should be close to the ground. Do not step on the plate with your toes or lift your heels off the ground to prevent insufficient strength or slipping.

    2. When learning to drive, it is necessary to stabilize the gathering and scattering, but it does not mean that the left foot is fixed in a certain direction and does not move. Strictly speaking, it is to stabilize the movement speed of the body, and the coordination of the left and right feet is a continuous process of fine-tuning from beginning to end.

    3. In order to prevent stepping on and stopping and stalling, do not gather with one foot and brake to go.

  2. Anonymous users2024-02-14

    Mine is the same, changing the clutch master cylinder has no effect.

  3. Anonymous users2024-02-13

    Mine is the same situation, I vent the clutch cylinder, let the oil flow out for two or three seconds before tightening the screws and it can be used, you can try it.

  4. Anonymous users2024-02-12

    Mine is in the same situation now, how do you deal with it? Thank you.

  5. Anonymous users2024-02-11

    Mine too, I'm just parked on the side of the road right now, waiting for the car to cool down... It's really painful, go to the 4S shop, the maintenance staff said to lift the three major pieces down for something, open your mouth to 1500. . . I didn't change it...

  6. Anonymous users2024-02-10

    Hello, how many kilometers is the car.

  7. Anonymous users2024-02-09

    Summary. Hello, happy to answer your questions.

    When the Hyundai Langdong runs hot, the clutch pedal becomes heavier, and suddenly it can't hang into gear, and it can't step on the clutch after the ignition is turned off, and it's good to stop for 20 minutes.

    Hello, happy to answer your questions.

    When the Hyundai Langdong runs hot, the clutch pedal becomes heavier, and suddenly it can't hang into gear, and it can't step on the clutch after the ignition is turned off, and it's good to stop for 20 minutes.

    In this case, if the celebration is closed, it may be that there is a problem with the clutch pressure plate. The pressure plate is too hard here, and there will be no such problem with the normal main pump or sub-pump.

    Many cars are this kind of problem, how to repair.

    In this case, if the clutch pressure plate needs to be replaced, it is a failure caused by a problem with the clutch pressure plate.

  8. Anonymous users2024-02-08

    The hot car feels so heavy, and the car doesn't go away with a block, what's going on? It's good to cool down for a while.

    If your Lang Dong clutch hot car feels heavy, and sometimes the gear car does not move, there may be the following reasons:1Clutch plate wear:

    When the clutch plates are severely worn, clutch operation becomes difficult and more force is required to press the clutch pedal. If the clutch plates are badly worn, sometimes the geared vehicle will not move. 2.

    Clutch pressure plate and clutch pressure plate spring aging: Clutch pressure plate and clutch pressure plate spring aging can cause clutch operation to become difficult and require more force to press the clutch pedal. 4.

    Clutch pump or clutch disc failure: A failure of the clutch pump or clutch disc can cause the clutch to become difficult to operate, requiring more force to press the clutch pedal. It is recommended that you send the vehicle to the repair station in time for inspection and repair, find the cause of the failure and repair it.

    If this happens for a short time, it would be nice to stop and cool down, which is a drop in the temperature of the clutch and hydraulic oil. However, for a long time, this situation may affect driving safety and needs to be checked and repaired in time.

  9. Anonymous users2024-02-07

    Summary. Hello, in this case, you first need to see whether the horn and headlights are normal, if these are not normal, then it is the problem caused by the insufficient battery power, so that the situation needs to be treated, if the headlights and horns are normal, no problem, then such a problem needs to be checked to see if it is the fault caused by the problem of the starter itself. Need to check the next starter to see here.

    Hello. Hyundai Langdong stepped on the clutch and ignited it without response, but it showed that it was energized.

    Hello, in this case, you first need to see whether the horn and headlights are normal, if these are not normal, then it is the problem caused by the insufficient battery power, so that the situation needs to be treated, if the headlights and horns are normal, no problem, then such a problem needs to be checked to see if it is the fault caused by the problem of the starter itself. Need to check the next starter to see here.

    There is no problem with the starter, but there is no difference between stepping on the clutch and not stepping on the clutch, both show power-on.

    When you step on the clutch gauge, there is no indication here that tells you to step on the clutch.

    If the clutch sensor doesn't show it, it's fine, you know.

    Good. Then you need to consider whether there is a problem with the power supply line of the starter.

    If the gauge shows that you are depressed on the clutch, then there is a problem with the clutch sensor.

    The sensor can only be replaced, not repaired, or directly connected.

    Can only be changed. It's broken, and you can't fix it.

    It's okay when the car is hot, but this problem occurs when the car is cold.

    Then this is basically a problem with the line.

    There is a problem with the sensor, and it is the same for both hot and cold cars.

Related questions
6 answers2024-08-10

I have used a fully synthetic engine oil 5w30 imported from Germany, my car is a 2013 modern Langdong manual natural aspiration, I used to use a certain brand of magnetic protection semi-synthetic 5w30 engine oil, after using the comparison found that the engine noise is less than before, I live in Dalian, the cold start in winter is faster than before, and the speed is fast, the car is also very light, ran 10,000 kilometers, I don't feel any abnormality, the durability is good, the most important thing is fuel consumption, I used to drive in the city fuel consumption is, After changing the German fully synthetic engine oil, the fuel consumption is, the highway no-load fuel consumption is really good, I have been using this fully synthetic oil, it is really good.

35 answers2024-08-10

Hello! For modern Langdong.

As far as this model is concerned, it is now a joint venture brand, and this engine is also a joint venture technology, and the overall performance is very stable, so you can buy it with confidence. >>>More

4 answers2024-08-10

The reasons for the steering wheel sinking are: 1. Insufficient booster oil, 2. Tire pressure is too low, 3. Bearing fit is too tight, 4. Booster problem, which can be dealt with according to the actual situation. >>>More

16 answers2024-08-10

It's all suitable, this car is really tangled, I personally recommend that buying a car is best to choose according to your actual needs and preferences, the best is to test drive and experience, after all, the actual feeling is the most real, and your satisfaction is cost-effective!

8 answers2024-08-10

Modern Langdong. When the battery is out of power, when connecting the charger, let the positive pole of the charger be connected to the red positive terminal post of the modern Langdong battery, and the negative pole of the charger should be connected to the black negative terminal post of the modern Langdong >>>More