What do you think about the furniture structure of wooden nails and tenons that are not suitable for

Compared with the general log furniture, the mortise and tenon structure of the furniture in the raw materials to consumable some, as long as the log furniture made of not very valuable wood, manufacturers are generally reluctant to use this way of making consumables, because, it is not so easy to sell well, so they would rather use the way to save materials.

In addition to comparing consumables, the structure also has labor. Manual costs are a major factor in considering manufacturers. Although there is a mechanized structure, there is a mechanical structure, but there are various ways in furniture production, some people cannot be replaced with a machine, then it can only be made in manual.

Manual production is much slower than machines and incurs much higher labor costs. This is one of the reasons why most manufacturers are reluctant to use the structure.

The mortise and tenon joint structure is a combination of tenon and tenon, which is an ingenious combination between more and less, high and low, long and short between wood pieces, which can effectively limit the twisting between wood pieces in all directions. For example, if you use iron nails to make a T-shaped combination of two wooden bars, the vertical and horizontal bars are easily twisted and change the angle, while the mortise and tenon joints are combined to prevent them from being twisted.

Secondly, metal is susceptible to rust or oxidation, and real mahogany furniture can last for hundreds or thousands of years. Many famous pieces of furniture are centuries-old, although there is a vicissitudes of life, but wood is difficult. If the furniture is combined with nails, then the wood is most likely intact, but the furniture scatters due to the rust of the metal of the connection, fatigue, aging, etc.

In ancient times, without machinery, without nails, our old ancestors could use for decades or even centuries, which would put an end to the wisdom and skill of high intelligence, that is, adoption. Mortise and tenon structure. The weather structure does not use nails, it has a lot of combinations, firm and beautiful.

In ancient times, you can use the falcon structure to solve the table, chair and bench, now the development of science and technology, how can not solve this simple problem, the key problem lies in the production link, and the seriousness of the manufacturer, I think now under the technology, as long as the seriousness is not a problem.

I don't agree with this, a lot of furniture with this structure is actually very strong, but it requires more skilled craftsmen.

The advantage of the mortise and tenon structure is that the decoration method used, or the installation method is relatively strong, and the disassembly is more convenient, his disadvantage is that there will be wear and tear after multiple disassembly, in addition, if the workmanship is not fine, the mortise and tenon error is too large.

There's nothing wrong with that. If there were a better and more convenient way to do it now, there would be no need for such a method. We still have to keep up with the times.

Furniture with wooden nails and tenons is very rare in our real life, especially the dining table. Basically, not because he is not suitable for the table, so do you know why is that? In fact, the main reason for this is that its cost is too high.

This process, relatively speaking, is more demanding, and there are more consumables. So on the whole, his cost will be a little higher, and for the dining table, maybe everyone will not have too many choices. After all, when we pursue quality, the requirements for the dining table are still relatively small.

Yes, in our real life, there are a lot of furniture, all kinds of crafts. So for us, when we choose, how to choose the best? Let's take a brief look at it together.

The first is to choose a style that is consistent with your overall style. We know that everyone's home decoration style is different. So for us, when we choose a home style, we need to pay attention to it, and we need to choose furniture that is consistent with the main decoration style.

In this way, it can be more harmonious and more coordinated. Otherwise, it will appear very abrupt and seriously affect the overall visual effect. <>

Secondly, choose according to the space in the room. We know that there are big and small houses. So naturally, there are big and small for furniture.

Different houses, the furniture he matches should be different. The larger the size of the furniture, the more strange it will be to put it in a small room. Such a combination is very undesirable.

Therefore, we must choose according to our actual space, so that we can really choose the appropriate and coordinated one. <>

So I hope you can pay attention to it, of course, in addition to these things, there are some other things that are also more critical. For us, when we choose furniture, we must choose the right and practical, so that it is the best for us.

Because such things are not very strong, and the dining table is often active, it may affect the normal use of people, and such things will fall apart, which may affect safety, such things are also relatively simple, but there are some unsightly factors.

It is because the furniture of this structure is not used for a particularly long time, and it will ulcerate if it is not used for a long time, and then there will be a lot of rivets on it, which is easy to be scratched, and then the load-bearing effect is not particularly good.

Such furniture has some special smell on it, and it is also particularly unstable, if it is used to make a dining table, if you put something on it, it will be melted, and it will also affect people's health, and the ability to corrode is also very strong.

The load-bearing capacity of this kind of furniture is very limited, it is easy to have problems, the dining table is easy to be worn out, and the cost will be relatively high, which is relatively inappropriate and very impractical.

Because the material of this furniture is very unsuitable for making a dining table, and the requirements for the appearance are relatively high, and it cannot be soaked in water, and the structure of the production is more complicated. It is also quite expensive, so this furniture is not suitable for a dining table.