The back of the computer chair creaks as soon as I lie down, what should I do?

First of all, it is necessary to determine which part is making the sound, which is generally prone to this problem in the place where the parts are linked.

The easiest way to do this is to find a syringe.

Something like that, inject some oil or butter into the connection to lubricate it (generally there are places where electric cars are repaired).

This problem is very easy to solve, go to the supermarket to buy a small tube of sewing machine oil or a small tube of lubricating oil or the like, and after coming back, the screws and joints can be solved, I wish you health and happiness.

The back of the computer chair creaks as soon as you lie down, and the screws are loose. Find the part with screws, tighten it with a professional tool, and you won't think about it again.

The back of the computer squeaks as soon as you lie down, indicating that the screws under the computer seat lack grease. You need to put a little oil on the screws under the computer chair.

You can check the fixing screws to see if they are loose and to see if there is any aging damage to the structure.

The squeak should be a lack of lubrication in the rotating or moving position.

If the back of a computer chair creaks as soon as you lie down, then the backrest connection is rusty. It's no longer flexible. That's why it's so loud.

The back of the computer chair creaks as soon as I lie down, what should I do? The creaking of the back of this chair as soon as you lie down indicates that this computer is also too old and should be replaced with a new one.

The computer chair creaks when you lean back, indicating that its quality is very poor, so it will creak.

The furnace should be the screw that is short of oil, smear some lubricating oil or car oil, and then there is the screw loose and twist the screw more.

It must be of poor quality, and the contact in many places is not very smooth and difficult to repair.

The computer rode the buckle and squeaked in general, what was going on, I just thought that it was an electric computer chair, that was an, not only when he was free, he thought.

These are all spam ads, please ignore them. These are all spam ads, please ignore them.

Can be repaired, causes and solutions:

1. Check that there is looseness, or missing parts, etc. If it is loose, tighten it with a tool, and if there are fewer parts, you can buy it, and then go to a professional master to install it.

2. It may be aging, you can drop some oil or lubricating oil on the rotating part of the swivel chair, and the friction will not sound.

3. It may be stuck in the slot, and you can turn it back and forth, left and right.

Type of material

1) Ordinary plastic feet: now basically eliminated, poor quality and reliability. Most of them are small chairs in use. Due to the recycling of plastics, such products are relatively environmentally friendly.

2) Nylon plastic feet: now used in large quantities, the quality is multi-grade. If the wheels on the five claws are not installed, and the five claw tips are cushioned with bricks, the wheels of the heavy-ton car are pressed on the five claws, or the static pressure is continuous, and the quality is completely assured.

Due to the recycling of plastics, such products are relatively environmentally friendly.

3) Steel iron feet (baking paint, electroplating): easy to rust, easy to crack at the weld.

4) Wooden feet: iron frame, wood surface only plays a decorative role.

1. If the bearing part of the chair is rusted, it can be solved by squeezing some lubricating oil into the bearing or the rotating shaft.

2. If the chair is loose for a long time, and the loose part is caused by friction, it can be solved by tightening the screw part with a wrench.

3. It may also be that the chair is damaged, etc., which should be repaired according to the degree of damage and the damaged part, if the value of the chair is not large, it is recommended to replace the chair with a new one.

4. There is a reason for the habit of sitting with a person, don't shake often when you sit up, and the sound will naturally be gone.

The screws are loosened and turned over to tighten.

If the stool keeps ringing, it may be loose, you can squeeze it in with a proper tool, or you can put two pieces of film under the stool, so that when he and I can't wipe it, there will be no sound.

This condition is supposed to be caused by a loose leg of the stool, which can be fixed with a nail. If you still can't change it after fixing, then you can only buy a new one.

The stool keeps ringing, what should I do? That's the stool. Loose screws are loose. It might be better to tighten the screws.

The stool keeps ringing, what should I do? If it's really troublesome at work, then you can only consider changing the stool.

Then go for another one and adjust it well.

What does the stool teacher want to do, you should repair the stool, which is loose, you should add a lid.

Drop a little water into the connection of several parts that will rotate relatively quickly, and find the right part when it doesn't sound, and then drop a little oil when the water is dry.

I have experience with this, first of all, you have to determine the exact place where the sound is, usually at the junction of the components; Then find something similar to a sweater needle, and put one end into the place where the sound sounds; Use engine oil (there are cars available, and points are important to repair cars if you don't have a car) drop a few drops along the sweater needle, lie down and shake it again until it doesn't sound.

This one is very simple, it is the reason why the screws are loose somewhere, you just need to tighten all the screws, with pliers, boards or screwdrivers, to solve the problem.

This kind of problem arises, after the seat is used for a long time, the screws will become loose due to the frequent shaking of the chair, resulting in loose joints, and after being subjected to pressure, the joints will produce dislocation friction, because most of them are metallic, so when rubbing, there will be a squeaky sound.

Generally, the screws are loose.

It's good to tighten it (pro-test).

Fix it, it's better to change it...