I would like to ask how long does it take for a Siemens fridge to refrigerate

The first time you use the refrigerator, don't adjust the temperature too low, mechanically adjust the thermostat to the lowest gear, if it is electronic, you can adjust the freezer to minus 12 degrees, the refrigerator to about 5 8 degrees, after the compressor starts, it depends on how high the indoor temperature is, if the indoor temperature is low in winter, the compressor will stop in 1 3 hours.

After a period of time, it is appropriate to set the temperature reasonably according to the seasonal temperature. Generally, the temperature of the freezer compartment of the refrigerator should be lower than minus 18 degrees, and the temperature of the refrigerator room should be between 1 and 10 degrees. If the refrigerator is energized and the thermostat (mechanical) is adjusted from zero to a higher gear and the compressor does not start, it means that there is a problem with the refrigerator, and if the refrigerator is not refrigerated 3 hours after the compressor is started, it means that there is a problem with the refrigerator, and the seller should be returned in time.

Under normal circumstances, the temperature of the freezer compartment of the refrigerator should be lower than minus 18 degrees, and the temperature of the refrigerator compartment should be between 1 and 10 degrees.

The operating time of the compressor varies according to the seasonal temperature and the temperature setting inside the refrigerator. Generally, the ratio of working time to shutdown time of the compressor in winter is 1:4 or 1:

5. It is about 1:3 in spring and autumn, and about 1:1 in summer.

The compressor generally works for about 10 to 30 minutes, which is relatively normal for your refrigerator compressor.

The working time and downtime are too long, the temperature in the refrigerator is uneven, the temperature difference is too large, you should carefully check whether the working time of the compressor is correct, if not, you should ask a professional to control the thermostat.

Make internal adjustments (adjustment screws inside the thermostat).

Before the new refrigerator is used, it can be put into the contents for freezing and refrigeration storage after running for 1-2h without load. In addition, the following should be paid attention to when using a new refrigerator:

1. If you just bought the refrigerator, you should leave it for a while, let its refrigerant flow back to the head (the bottom of the refrigerator), and then turn on the power. Because in the process of handling, the refrigerator may be placed on the side or flat, if it is flat, it must be left upright for a long time before it can be energized. Before using the new refrigerator, you should tear off all the adhesive stickers inside, and you can put a lemon or put some tea wrapped in gauze, which can remove odors.

2. Don't put things with special odors, and then items with large water content or high temperature, try not to put them directly in the refrigerator, and try to reduce the number of times you open the door at ordinary times.

3. Pay attention to whether the position of the refrigerator is reasonable and whether it is convenient for the refrigerator to dissipate heat. It is also necessary to check the power supply of the home, whether it is grounded, and whether it is a dedicated line.

4. Before use, the user should carefully read the attached product manual and check whether the various parts of the refrigerator are intact.

5. After turning on the power supply, listen carefully to whether the sound of the compressor is normal when starting and running, whether there is the sound of pipelines hitting each other, if the noise is too loud, check whether the product is placed smoothly, whether each pipeline is in contact, and make corresponding adjustments. If there is a loud abnormal sound, the power should be cut off immediately and a professional repairer should be contacted.

6. When starting to use, it is necessary to run with load reduction, because the moving parts of the new machine have a running-in process. After running for a period of time, add a large amount to prolong the life of the refrigerator.

It generally takes 24 hours to 48 hours to answer. The temperature will drop in about 10 minutes, the space is small, and the insulation layer is good, so the cooling will be very fast. When using the refrigerator for the first time, it is necessary to leave a certain amount of space to keep the cold air circulation inside the refrigerator and try to prevent the refrigerator from working at full capacity for a long time.

Hot food should be cooled to room temperature before putting it in to avoid the refrigerator not being shut down for a long time. Food should be sealed in a plastic bag or plastic wrap or put in an airtight container, which can prevent food from being damp, dehydrated, and smelly. Foods with water should be removed from the water and placed to avoid excessive frost due to the evaporation of a large amount of water.

Note: Do not place liquids and glassware in the freezer to prevent frost cracking damage. Do not put volatile, flammable chemicals, corrosive acids and alkalis to avoid damaging the refrigerator.

The newly bought refrigerator needs to be stationary for 2 hours before turning on the power, and it can be used for 1 hour before putting things.

1. The main purpose is to prevent the refrigerator from running the refrigerated oil into the pipeline during transportation, and the refrigerated oil will reset and return to the compressor after 2 hours of stationation, so as to ensure that the compressor works in a good state and avoid burning out the compressor.

2. In addition, it is necessary to work for a period of time with electricity, and it is best to reach the set temperature before putting the food in after the refrigerator is shut down, which is also to ensure that the working load of the refrigerator is not increased, so as to achieve the purpose of saving electricity.

The temperature range of the freezer compartment of the refrigerator is -4 -24 degrees.

Fresh fish and frozen meat stored in the freezer should be cleaned in advance, large pieces of meat should be cut and stored in bags, do not put the food directly on the surface of the evaporator, so as not to freeze on the evaporation, it is inconvenient to take out, do not put bottled liquid drinks into the freezer, so as not to freeze and crack the packaging bottle.

The amount of food stored in the refrigerator should not be too much, no more than two-thirds of the total capacity of the refrigerator. Overfilled, too tight, and without gaps, it is not conducive to air convection, increases the load of the unit, reduces the service life of the Xiaoice tank, and will also consume more electricity.

The refrigerator freezer is a freezing role, the temperature is too low to freeze into ice, the temperature is too high and can not play its role well, the general refrigerator freezer temperature is better at minus 18 degrees Celsius, in this way, the refrigerator is not easy to freeze and frost, but also to maximize its energy efficiency.

It depends on the refrigeration star of your refrigerator, generally minus 6 degrees per star, and you can convert it yourself.

1. The temperature range of the refrigerator freezer is -4 -24 degrees (three-star -18 degrees, four-star -24 degrees), and the temperature range of the refrigerator is 5 15 degrees. When the mechanical thermostat is adjusted, the freezer and refrigerator temperatures change at the same time.

2. When the ambient temperature is higher than 30 degrees in summer, the set temperature should be adjusted higher to prevent the compressor from not stopping, resulting in serious freezing in the refrigerator, which is to sacrifice the function of the refrigerator to ensure the normal use of the refrigerator.

This may be due to the pressure on the inside of the refrigerator, causing the door to be tightly locked. In general, after closing the refrigerator door, you should wait for about 5-10 seconds for the pressure inside to gradually release before trying to open the door. If the problem persists, check the fridge door to make sure there are no obstructions or dirt between the door frame and the door panel.

In addition to the stool, you can also try to adjust the temperature of the refrigerator, which may be too low or too high to affect the opening and closing of the door. If the problem persists, it is recommended that you contact Siemens after-sales service or professional repair personnel for help.

Some models of Siemens refrigerators are equipped with an automatic door closing system, which means that when you push the door open and let go of the limb type, the door closes automatically. In order to ensure the proper operation of the automatic door closing system, the door of the Siemens refrigerator needs to be fully opened from the state of Lixiangchai before it can be opened again. Normally, it is necessary to wait for about 2-3 seconds until the automatic door closing system closes the door completely before opening the refrigerator door again.

This is to prevent the door from not closing completely due to the automatic closing system or from causing the machine to malfunction. If you still can't open the refrigerator door carefully, we recommend that you check the user manual or contact Siemens customer service for more information.

Under normal circumstances, you need to wait about 2 seconds after the door of the Siemens refrigerator is closed, at which time the door lock and handle can be locked normally, and the refrigerator door can be opened at this time.

It is possible that the door of the Siemens refrigerator has a delayed closing function to ensure that the internal temperature of the refrigerator does not fluctuate too much due to frequent opening and closing. After closing the refrigerator door, one needs to wait for a while before it can be opened again.

Specifically, you can try the following steps:

1.Close the refrigerator door and wait about 5 seconds or so.

2.Try to open the refrigerator door. If you find that it doesn't open right away, wait a few moments and try again.

3.If it still doesn't open, check if there is another fault or problem. For example, there may be aging seals, blockages, damaged slag, etc.; It could also be due to temperatures such as a broken lead sensor, a malfunctioning control panel, etc.

In conclusion, it is important to pay attention to safety and proper operation methods when using any home appliance and equipment, and deal with related issues in a timely manner to ensure the normal operation of the equipment and prolong the service life. If you encounter difficulties or questions, it is recommended to contact professional maintenance personnel for inspection and maintenance.

Siemens is a well-known German manufacturer of home appliances, and its refrigerators are very popular. When using a Siemens fridge, you may find that when you close the fridge door, you need to wait a few seconds for the door to open. This phenomenon is normal, and below we will explain this phenomenon from the physical angle of rolling.

First of all, to understand why a refrigerator door needs to wait a while for it to reopen, we must first introduce an important physical concept – pressure equalization. When there is a difference between two objects, they move closer to each other. For example, heat flows from hot to low, water flows from high to low, and so does air.

When it comes to pressure, there is also the issue of pressure difference. If the pressure of the gas in an area is lower than that of the surrounding area, the surrounding gas will compress the gas into it until the pressure equalizes. Conversely, if the pressure of the gas in the area is higher than that of the surrounding area, the surrounding gas will push out the gas in the area until the pressure is equalized.

Back to the problem of the refrigerator door. When you close the refrigerator door, the cold air inside is enclosed inside, and since the cold air is denser than the air outside, it also has more pressure. This is known as the "high pressure zone".

Outside the refrigerator, it is a relatively "low-pressure area". If you immediately open the refrigerator door again, the high and low pressures inside and outside will change dramatically, which may cause air to suddenly spew out of the inside of the refrigerator. This will not only lead to the waste of cold air, but it can also lead to some inconvenient problems, for example, women who like to buy cellulose may find that when the refrigerator door is opened, the buildup on the surface of vegetables and fruits will be blown off the bridge and other places, which is very inconvenient.

To avoid this problem, Siemens refrigerators have designed a mechanism that delays the opening of the door. In simple terms, when you close the refrigerator door, this mechanism leaves a little air inside the refrigerator to ease the difference in pressure between the inside and outside. This way, when you open the refrigerator door again after a few seconds, the pressure inside and outside has stabilized and will not change drastically.

This design can help save energy while also protecting your food and belongings, ensuring they don't get blown off.

Overall, the fact that you need to wait a few seconds for your Siemens refrigerator to close the door before it opens is not a machine failure, but a reasonable design. By understanding the physics of pressure equilibrium, we can better understand the science behind this phenomenon and make better use of this excellent home appliance.

After the door of your Siemens fridge is closed, wait about 45 seconds before opening the door. This is because the mechanical control system of the Siemens refrigerator is designed to heat the freezer first after the door is closed, so as to maintain the constant temperature of the freezer and maintain the freshness of the food. 45 seconds is to stabilize the temperature of the freezer to ensure the freshness of the food.

Summary. Hello, glad to answer for you, under normal circumstances, the refrigerator cold compartment temperature should be set between 4-8 degrees. If it is a mechanical thermostat, the gear should be adjusted according to the ambient temperature of the season, the gear should be adjusted to 2-3 gear in summer, 4-5 gear in spring and autumn, and it can be adjusted to 6-7 gear in winter, mainly because the external temperature will affect the performance of the refrigerator.

The freezer compartment of the refrigerator plays a freezing role, the temperature is too low to freeze into ice, and the temperature is too high to play its role well, so the temperature of the freezer is kept at minus 18 degrees Celsius, so that the refrigerator is not easy to freeze and frost, and it can also maximize its energy efficiency. Extended information: The role of the refrigerator compartment and the freezer in the refrigerator 1. The refrigerator gantry of the refrigerator compartment is suitable for food that is not easy to spoil or is about to be eaten.

2. The position of the upper floor near the door is suitable for direct entrance of food, 3. The leftovers at home are best placed on the back wall of the upper floor after being sealed in advance. 4. The position of the lower layer of the refrigerator near the door is suitable for all kinds of vegetables and fruits. 5. The lower back wall is suitable for uncooked food that must be kept at low temperature.

Freezer 1, the upper layer of the refrigerator freezer has the lowest temperature, suitable for quick freezing. 2. The middle layer is suitable for food that does not need to be heated for a long time. 3. Frozen fish, raw meat, seafood, etc. are most suitable for placing in the lower layer.

Friends, I really don't understand, you can be more specific.

Hello, I'm glad to answer for you, under normal circumstances, the temperature of the cold room of the ice slag box should be set between 4-8 degrees. If it is a mechanical temperature control high tung device, the gear should be adjusted according to the seasonal ambient temperature, the gear should be adjusted to 2-3 gear in summer, the gear should be adjusted to 4-5 gear in spring and autumn, and it can be adjusted to 6-7 gear in winter, mainly because the external temperature will affect the performance of the refrigerator. The freezer compartment of the refrigerator plays a freezing role, the temperature is too low to freeze into ice, and the temperature is too high to play its role well, so the temperature of the freezer is kept at minus 18 degrees Celsius, so that the refrigerator is not easy to freeze and frost, and it can also maximize its energy efficiency.

Extended information: The role of the refrigerator compartment and the freezer in the refrigerator 1. The refrigerator gantry of the refrigerator compartment is suitable for food that is not easy to spoil or is about to be eaten. 2. The position of the upper floor near the door is suitable for direct entrance of food, 3. The leftovers at home are best placed on the back wall of the upper floor after being sealed in advance.

4. The position of the lower layer of the refrigerator near the door is suitable for all kinds of vegetables and fruits. 5. The lower back wall is suitable for uncooked food that must be kept at low temperature. Freezer 1, the upper layer of the refrigerator freezer has the lowest temperature, suitable for quick freezing.

2. The middle layer is suitable for food that does not need to be heated for a long time. 3. Frozen fish, raw meat, seafood, etc. are most suitable for placing in the lower layer of Qi Qitan.