How to adjust the computer temperature control of Siemens refrigerator?

The temperature regulation of the refrigerator at Ximen is as follows:

If it is a mechanically controlled refrigerator, you can directly adjust the thermostat gear of the fresh-keeping room, and adjust the low gear in normal summer, 1 2 gears; Spring and Autumn Medium Gear, 3 4 Gears; In winter, turn up high gear, 5 to 6 gears, and if the ambient temperature is lower than 10 degrees, turn on the greenhouse supplement. If it is higher than 15 degrees, turn off this switch.

If it is a computer-controlled refrigerator, you can directly select the "automatic" mode. Method:

Continuously touch the "function" selection button 8 until the "auto" character in the function display area 7 will be surrounded by an open wireframe, and then touch the "set" button 14, a thick vertical line will appear to the right of the "auto" character, indicating that the automatic mode has been entered. After entering the automatic mode, the refrigerator will show 4, the fresh-keeping room will show 0, and the freezer will show -1 8, and the refrigeration system will automatically operate at such a temperature setting.

Manual setting method of computerized temperature control refrigerator:

refrigerated room temperature regulation; The cold room display is activated by touch button 2, followed by the touch button 11 and button 13 to adjust the desired cold room temperature (adjustable between +2 and +10).

Bio-chamber temperature regulation: Activate the bio-chamber display area 3 by touching button 4, and then adjust the desired chamber temperature (adjustable between 0 and 4) by touching button 11 and button 13.

Freezer temperature adjustment: Freezer display area 5 is activated by touch button 6, followed by touch button 11 and button 13 to adjust the desired freezer temperature (adjustable between -6 and -26).

The method of manual adjustment of Siemens computerized temperature control refrigerator:

1. Temperature regulation of the refrigerator room

1) Press "2" to activate the "Display Area 1" of the refrigerator room.

1) First, press "Button 4" to activate the "Display Area 3" of the biopreservation room.

1) Activate the freezer compartment "Display Area 5" by pressing "Button 6".

Siemens refrigerator use notes:

1. When the refrigerator is first opened in use, it is normal to feel hot when touching both sides of the refrigerator.

2. The temperature of the freezer can be adjusted freely, and the temperature on the display screen cannot be changed (showing the current temperature in the refrigerator).

3. If you are on vacation outside, it is recommended to use the holiday function, press the "holiday function" button, the bio-preservation and refrigerator will stop working, but the freezer is running.

Note: If the temperature in the box is 14, the refrigerator and fresh-keeping room will still start working automatically.

4. If you need quick freezing, you can use the quick freezing function.

5. If there is too much frost in the freezer compartment of the refrigerator, it should be clear that it will prolong the service life of the refrigerator without consuming too much electricity.

Under normal circumstances, the temperature control of the smart refrigerator computer is generally regulated on the display above the computer, and the temperature can be reasonably adjusted by manually confirming and adding and subtracting, so that you can achieve a very good use effect, and you can learn more from professionals.

"When the temperature of the surface of the object is very low, and the temperature of the air near the surface of the object is relatively high, then there is a temperature difference between the air and the surface of the object, if the temperature difference between the surface of the object and the air is mainly caused by the radiative cooling of the surface of the object, then the air will cool when the warmer air and the colder surface of the object come into contact, and the excess water vapor will precipitate when the water vapor is supersaturated. If the temperature is below 0°C.

The temperature adjustment method of Siemens refrigerator is as follows:

The mechanically controlled refrigerator directly adjusts the thermostat gear of the fresh-keeping room, 1-2 gears in summer, 3-4 gears in spring and autumn, and 5-6 gears in winter.

For the refrigerator with computer temperature control, select "Auto Mode" and continuously touch "Function" to select button 8 until the "Auto" character in function display area 7 is surrounded by an open wireframe. Touch the "Settings" button 14, and a thick vertical line will appear to the right of the "Auto" character, indicating that you have entered the automatic mode. The refrigerator shows 4 degrees Celsius, the fresh-keeping room shows 0 degrees Celsius, the freezer shows -18 degrees Celsius, and the automatic mode operates.

Summary. How to use the refrigerator thermostat In the process of use, the working time and power consumption of the refrigerator are greatly affected by the ambient temperature, so it is necessary to choose different gears to use in different seasons.

How to adjust the temperature control of the computer in the old-fashioned Siemens refrigerator:

1. Press the unlock button for 5 seconds to unlock;

2. Press the mode button to select the mode of refrigeration or refrigeration;

3. Press the up and down buttons to adjust the temperature;

4. After setting the temperature, press the lock button for 5 seconds and lock it;

5. Start the refrigerator.

How to adjust the computer temperature control of Siemens refrigerator?

How to use the refrigerator thermostat In the process of use, the working time and power consumption of the refrigerator are greatly affected by the ambient temperature, so it is necessary to choose different gears to use in different seasons. The method of adjusting the temperature control of the computer in the old-fashioned Siemens refrigerator: 1. Press the unlock button for 5 seconds to unlock; 2. Press the mode button to select the mode of refrigeration or refrigeration; 3. Press the up and down buttons to adjust the temperature; 4. After setting the temperature, press the lock button for 5 seconds and lock it; 5. Start the refrigerator.

Hello biha.

This old-fashioned refrigerator.

This old-fashioned refrigerator.

The temperature has been 10 degrees above 0.

Yes. I can't tune it.

The motherboard is broken and needs to be repaired.

Hello, dear, now for you to answer the question of Siemens computer temperature control refrigerator temperature adjustment method is divided into two ways: Cold room temperature adjustment Activate the cold room display area by touch button 2, and then use touch button and button 3 to adjust the desired cold room temperature (adjustable between +2 and +0). When storing perishable food, it is recommended to set the temperature of the refrigerator below 4.

Bio-chamber temperature regulation Activate the bio-chamber display area 3 by touching button 4, and then adjust the desired chamber temperature (adjustable between 0 and 4) with touch button and button 3. Freezer Temperature Adjustment Freezer display area 5 is activated by touch button 6, followed by touch button and button 3 to adjust the desired freezer temperature (adjustable between -6 and -26). The temperature setpoint does not need to be set again, even after a power failure.

Hello, Siemens has two kinds of refrigerators: mechanical temperature control and electronic temperature control: for mechanical temperature control refrigerators, there is a knob on the right side of the refrigerator to adjust the temperature, 0 is to turn off the machine, 1 is the highest temperature, 5 is the lowest. When the ambient temperature is lower than 16 degrees, the refrigerator may not start, please turn on the temperature compensation and quick freezing switch, and adjust the gear to 1 or 2 gear.

For computerized refrigerators, the temperature can be adjusted via the touchpad.

Step 1: Adjust the temperature in summer.

When the ambient temperature is high in summer, it should be used in 1-2 weak gears. The reason is that in summer, the ambient temperature is high, and at this time, it is difficult for the temperature in the box to drop by 1 degree, and the loss of cold through the insulation layer of the box and the door seal will also be accelerated, so that the start-up time is very long and the downtime is very short.

This will lead to the long-term operation of the press at high temperatures, which will aggravate the wear of the piston and cylinder, and the insulation performance of the enameled wire of the motor coil will also be reduced due to high temperatures, and the power consumption will also rise sharply, which is uneconomical and unreasonable.

If you change to the 1st or 2nd gear in weak gear at this time, you will find that the start-up time is significantly shorter, and the downtime is longer, which not only saves electric energy, but also reduces compressor wear and prolongs the service life. So turn the thermostat to a weak setting.;

Step 2: The higher the number, the lower the temperature.

The number of the refrigerator thermostat in most refrigerators today represents the opposite temperature, that is, the higher the number, the lower the temperature;

Step 3: Refrigerator temperature control button.

The temperature control button of the refrigerator is basically 0 1 2 3 4 5 6 7 gears, the higher the number, the lower the temperature, under normal circumstances, we only need to adjust the temperature of the refrigerator to between 3 gears in spring and autumn.

Step 4: Adjust the temperature in winter.

In winter, the general gear should be played to more than 4 gears. The reason is that there is only one refrigerated room thermostat to control the temperature of refrigeration and freezing, because the refrigeration temperature is technically required to be controlled between 0-10 degrees, and the refrigeration environment is generally low in winter, and the refrigeration is easy to reach the set temperature;

If the set temperature is too high, it is easy to produce a short start-up time of the refrigerator and the refrigeration effect cannot be achieved, and if the ambient temperature is low in winter, the main thing is to ensure the refrigeration effect of refrigeration.

First of all, you need to unlock the display screen, and then press the artificial intelligence button for 3 seconds, the refrigerator will immediately enter the artificial intelligence state, and the computer will intelligently adjust the temperature according to the actual situation;

If you want to manually adjust the temperature of the refrigerator room, you need to press and hold the refrigerator adjustment button, the refrigerator temperature will be displayed, and the refrigerator temperature will be set to enter the refrigerator temperature setting state. Then, with each press of the refrigeration adjustment button, the temperature value increases by 1 degree until it reaches 10 degrees. Press this button again, the refrigeration temperature will display of, indicating that it has entered the prefabricated function of closing the refrigerator, and then press the refrigeration adjustment button, and the temperature value will return to 2 degrees, and so on.

If there is no button operation within 5 seconds after setting, the temperature display area will stop flashing and be confirmed. When the OF gear is selected and confirmed, the cold room is closed, and when the non-OF gear is selected and confirmed, the cold room resumes refrigeration.

The operation method of temperature setting in the variable temperature chamber and freezer chamber is the same as that in the refrigerator room.

The freezer cannot be closed, and some refrigerators have the function of closing the refrigeration and soft freezing separately, but there is no function of turning off the freezing. The refrigerant is first frozen and then refrigerated, and if the freezing is turned off, the entire refrigerator will not be refrigerated.

Landlord,,, you are so talented... Such a good post, what should I do if I never see it again in the future?