What is the warning sign that there is a car on a ramp on the dashboard of a car?

The logo of the car is the light of the car anti-theft system. The car pattern is always on, it may be that the body stability system is turned off, if it is flashing while driving, the body stability system is working, and the pattern of the car door is open is that the door is not closed.

A device that reflects the working conditions of each system of a vehicle on the instrument panel of an automobile. Common ones are fuel indicators, cleaning fluid indicators, electronic throttle indicators, front and rear fog light indicators and alarm lights.

Different cars have different gauges:

The conventional instruments of general automobiles include speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc. A variety of indicators or warning lights are made under the ** of the dashboard of modern cars.

For example, coolant level warning light, fuel level indicator, washer liquid level indicator, charging indicator, high and low beam dimming indicator, transmission gear indicator, brake anti-lock braking system (ABS) indicator, drive force control indicator, airbag (SRS) warning light, etc.

Car dashboardThere is a sign that there is a trolley on the ramp and that the vehicle has turned on the HDC (Hill Descent System).

HDC (Hill Descent Control): Also known as Hill Grade Control (HDC), it allows the driver to operate without pressing the brake pedal.

Smoothly navigate steep downhill sections with full control. The braking device is automatically controlled as needed.

The wheels move forward slightly faster than they travel, allowing the driver to fully concentrate on controlling the steering wheel.

When the HDC is set and the vehicle enters a steep slope, the engine brakes themselves can provide a considerable degree of deceleration without the risk of tyre lock-up. When a steep slope is too steep and the engine brakes are not enough to maintain the maximum speed, HDC can use the ABS system.

Activate the brake release action when necessary to reduce the increasing speed of the vehicle to maintain a stable and safe speed downhill.

If the driver has to steer to avoid an obstacle while descending a steep hill, the HDC system will also detect and further lower the maximum speed limit to ensure full control of the vehicle. It is worth noting that whether the ABS system actuates or not depends on whether the speed exceeds the upper speed limit, which is different from the traditional ABS anti-lock brake function, which is activated when the driver steps on the brakes to slow down and the tires will lock.

Notes:

The HDC system must be set up before entering steep slopes so that the owner can concentrate on the steering wheel. In steep slopes, any improper pedal operation can lead to the danger of loss of control, such as applying the brakes will cause the tires to lock up and slip, and pressing the clutch will cause the engine brake to lose.

Therefore, after the HDC button is set, the driver must release all pedals, including the accelerator, brake and the clutch of the manual car.

Generally, the yellow on the instrument is the fault warning light, indicating that there is a problem with a certain part and is not working properly, prompting you to check and repair it quickly.

Thank you! <>

The sign you describe should be a "steep hill assist" function that comes with the car, when your vehicle needs to start on a certain slope, this sign will light up, indicating that this function has been activated, this function is equivalent to the car automatically helping you brake the car, which is convenient for steep slopes to start and prevent backward slipping.

Hello, that's a ramp up auxiliary light.

Hello That's the downhill assist function, if the red light is on, it means that the system is faulty, it is recommended to go to the 4S store to check.

Generally, the yellow one on the meter is a fault warning light, indicating that there is a problem with a certain part and is not working properly, prompting you to check and repair it quickly.

The common faulty lights of the car are:

1. Engine fault light: When we see the engine fault light on the top of the car, it means that the engine of the car is faulty, and this kind of fault is generally very serious.

2. Battery indicator: In the process of car driving, the battery is a main function, if there is a problem with this function, then it will cause problems in car driving.

4. Abnormal brake disc warning light: Once the abnormal brake disc warning light is lit when driving, it means that your car's brake disc is very worn, or there is a big problem with the sensor.

5. Brake system warning light: Once our car finds that the brake system warning light is on, it means that your car system is faulty, or the brake fluid is insufficient.

A variety of indicators or warning lights are made under the instrument panel of modern automobiles, such as coolant level warning light, fuel level indicator, washer liquid level indicator, charging indicator, high and low beam dimming indicator, transmission gear indicator, brake anti-lock braking system (ABS) indicator, drive force control indicator, airbag (SRS) warning light, etc.

The instruments of different car dashboards are not the same, but the conventional instruments of general cars include speed odometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc. In modern automobiles, automotive instruments also need to be equipped with voltage regulators, which are specially used to stabilize the voltage of the instrument power supply and suppress the fluctuation amplitude to ensure the accuracy of the automotive instrument.

Most of the meter display is based on the sensor, and the sensing device changes its resistance value according to the state change of the monitored object, which is expressed through the instrument. The most conspicuous thing in the dashboard is the speed odometer, which indicates the car's speed in kilometers and hours. The speedodometer actually consists of two meters, one is the speedometer and the other is the odometer.

It is a hill start assist sign. When the vehicle is starting on a steep or slippery slope, the vehicle will slide backwards when the driver switches from the brake pedal to the accelerator pedal, making it difficult to start.

When Hill Start Assist is not equipped, the driver must switch from the brake pedal to the accelerator pedal quickly and accurately. However, when equipped with Hill Start Assist, the driver can easily start and operate the pedals because Hill Start Assist prevents the vehicle from sliding backwards.

Vehicle Automatic Transmission Assist System Usage:

When the vehicle is not in P gear (do not put it in P gear, all other gears are fine), press the brakes firmly and hear a "beep" sound, then the hill start assist system takes effect (the working time is two seconds), and the brake light will light up and automatically generate brakes.

The use of manual transmission assist system of the vehicle: when the vehicle starts on a steep or slippery slope, about 3 seconds are in the braking state, so that the driver can calmly switch from braking to the accelerator pedal, as long as the car has this function, it does not need to be set, everything is automatic.

Hello,This should be the ramp start assist,If you say that this fault is bright,It is recommended that you go to the four S store to check the fault code。 Check if it's us? There was a problem with the electronic parking system. Hope it helps.

Hill Start Assist.

The logo of the car is the light of the car anti-theft system. The car pattern is always on, it may be that the body stability system is turned off, if it is flashing while driving, the body stability system is working, and the pattern of the car door is open is that the door is not closed.

It is normal for the safety indicator to flash after locking the car, which is the anti-theft system working. The safety indicator indicates the status of the Nissan Vehicle Anti-Theft System (NATS). When the ignition is in the "ACC", "OFF" or "LOCK" position, the safety indicator flashes to indicate that the safety system loaded on the vehicle is working properly.

Note. The safety indicator lights up for about 30 seconds and then flashes. The system is up. If, within 30 seconds, the door is unlocked or the ignition is pressed to the "ACC" or "ON" position, the system will not start.

The system activates even when the driver and/or passengers are in the car, while all doors are locked and the ignition is turned off. Turn off the system with the ignition in the "ACC" position. When the ignition is pressed to the "ACC" or "ON" position, the alarm will stop.

Generally, the yellow on the instrument is the fault warning light, indicating that there is a problem with a certain part and is not working properly, prompting you to check and repair it quickly.

Thank you! <>

Summary. Hello, I am inquiring for you here, please wait a while, I will reply to you immediately There are two oblique z under the car logo on the car dashboard Hello, I am inquiring for you here, please wait a while, I will reply to you immediately Dear, hello, I am happy to answer for you. There are two oblique barriers under the car logo on the dashboard, which means that the ESP is activated, indicating that the on-board computer has detected that at least one of the four wheels has a tendency to slip.

Automatically distributing traction has begun in an attempt to correct it. It is common to have a beating on one side of the wheel on the sand road and the other side on the normal road surface.

The automotive ESP system is a chassis braking technology developed on the basis of anti-lock braking control system (ABS), which is mainly composed of a control unit, steering sensor, wheel speed sensor, side slip sensor, lateral acceleration slide sensor, etc. The ESP solid crack beam is now the vehicle automatic safety source is not controlled, which can effectively improve the driving stability and safety of the vehicle under dynamic conditions such as braking, driving and steering.

Summary. It has no effect on normal driving, and the uphill assist is the effect of giving you the engine speed up when starting on a steep slope.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

A ramp, that's the uphill assist system.

Bo Yue 16 years.

Hill Assist system, which requires the decoder to read the fault code.

What's going on.

This is a malfunction**.

What effect does this code have on the car.

This belongs to the problem, to check.

It has no effect on normal driving, and the uphill assist is the effect of giving you the engine speed up when starting on a steep slope.

Uh-huh. Good.

If I can help you, please give me a thumbs up Thank you!