How to turn on the Samsung Note4 camera light

Hello dear Samsung users:

How to turn on the flash function on the mobile phone tablet:

1.Go to the camera - tap the menu key - Settings - tap the gear icon - flash - select OFF (or Auto).

2.Some early models: Go to the camera screen - look for the lightning bolt icon on the left side of the screen - select On Off (or Auto).

Note: Some phones don't support the flash feature. It's a good idea to check if there's a flash near your phone's rear camera first.

Comments, suggestions, complaints, please click:

First, find "Apps" on your phone's desktop and click on it to enter the list of apps.

Then, find the "Settings" icon on your phone and press it to enter the settings screen.

Find "My Devices" and click on it, and at first glance there are no options you need.

It doesn't matter, swipe down and see the four big words "Accessibility".

Click on "Accessibility", swipe down, there is the option of "Flashing Notification", tick on it, so that if there is ** or a text message comes, the flash behind the phone will light up and keep flashing.

If you don't need this feature anymore, then the method is the same, just remove the tick on the "Flashing Notifications" option, and the flash will not turn on when you come to ** and text messages.

Flash settings are, Auto or Disabled; If you're talking about flashlights, there's something in the widget**.

How do I turn on the flash when taking photos on Samsung Note9? At night or in a low-light environment, we'd better turn on the flash, so that the shooting is more clear, and the following brings you the Samsung note9 flash to take pictures.

Step 1:Under the Standby page, tap Camera.

Step 2:Click on the "Lightning" sign.

Step 3:a" indicates that the flash is automatically turned on.

Step 4:The lightning bolt is shown in yellow, indicating that the flash is used every time you take a photo. Tap again to close.

2. Return to the home page of the camera and click the button in the upper right corner to switch to the rear camera.

4. On the flash settings page, scroll down, find the flash option, the system is off by default, click on the area, and in the pop-up list, you can choose to turn on the flash, or set it to automatic.

5. Select the "On" option, as long as the camera function is turned on, or the flash will be started the moment you take a photo, and the "Auto" mode will intelligently judge whether you need to fill the light and turn on the flash.

Three, open the camera to see the symbols one on, one off, one automatic.

Turn on the camera, Menu key. You can see the various settings, select the flash inside, and it will be on, or off. Just choose.

Hello: According to your description, first of all, it is recommended that you turn on the camera >> gear icon in the upper left corner >> click the lightning bolt icon to close it.

Steps:

1.When the camera is turned on and the camera is front-facing, the flash cannot be turned on<>

2. Return to the home page of the camera and click the button in the upper right corner to switch to the rear camera.

3. After switching the rear camera, tap the setting button on the screen 3 times in a row to enter the camera's flash settings page.

<>4.Scroll down on the flash settings page and find the flash.

5. Select "Off", as long as the camera function is turned on, or the flash <> will not be activated at the moment of taking a photo

Steps:1Turn on the camera, the flash won't turn on when the camera is a front-facing camera, the flash button is gray, and the switch can't be operated.

2.Go back to the camera's home page and tap the button in the upper right corner to switch to the rear camera3After switching the rear camera, tap the settings button on the screen three times in a row to enter the camera's flash settings page.

4.Scroll down on the flash settings page and find the flash.

5.Select the "Off" option, and the flash will not be activated as long as the camera function is turned on, or the moment you take a photo.

Hello dear Samsung users:

Depending on the version, it is recommended that you check the settings of the camera to see if there is a tag helper, if so, please turn this setting on, the date can be displayed in **, if not, it cannot be set.

Comments, suggestions, complaints, please click:

1.Before setting up, you need to connect your phone to the Internet. First, open the built-in "Camera" program on your phone, and then click the settings button on the page 3 times to enter the photo settings page.

2.In the photo settings, you can set the size, flash, in these options, find the "GPS label" option, click once, the system is turned off by default, click on the back of the open option, click "OK" in the system prompt message, and the setting is complete.

The screen prompts that contacts have stopped when Samsung Note4 phone is in use, it is recommended that you:

1.Restart your phone to try;

3.If it is invalid, check whether there is a new version of the machine system and try to upgrade;

4.Back up important data (contacts, **, memos, etc.) in your phone, try to factory reset your machine;

If the problem persists, please bring the purchase invoice, repair card and machine to the Samsung service center for professional after-sales engineers to help test.

After taking a photo, click Menu - Tab Helper - Weather Location - People - any check can be checked.

Most of Samsung's phone settings don't have the option to turn off the sound of taking photos. Some phones that have recently hit the market can turn off the shutter sound by switching the sound to silent or vibrating.

The system's built-in camera cannot turn off the sound, and third-party camera software can be used to improve this function.

4.The settings interface appears, turn off the camera sound, you can try it, and the sound will no longer appear when taking photos. And this camera software also has other very useful functions.

Can't turn it off.,Samsung's privacy protection function.。。

Note4 series mobile phones all support LED indicator, setting path: Settings - Device - Display and Wallpaper - LED Indicator.

The Samsung Note4 LED indicator can be turned on in "Devices" in "Settings".

The specific steps to turn on the Samsung Note4 LED indicator are:

The first step is to tap "Settings" on your phone.

Step 2, click on "Devices".

Step 3: Click on the LED indicator to modify it.

Hello dear Samsung users:

We welcome your comments on our services.

The Samsung Note4 LED indicator can be turned on in "Devices" in "Settings".

The specific steps to turn on the Samsung Note4 LED indicator are:

The first step is to tap "Settings" on your phone.

Step 2, click on "Devices".

Step 3: Click on the LED indicator to modify it.

Under the Standby page, click the menu button in the lower left corner and select Settings.

Tap the LED indicator.

Just tick all the options.

Complete the settings to turn on the indicator display.

If you need to display the date on your phone**, we recommend that you:

1.Check that your phone supports the Tag Helper feature.

2.If it is supported, please open Album - Menu Key - (Settings) - Tag Helper - Turn on Try.

1. Turn on your phone, find the "Camera" app on the desktop and tap to enter the camera interface, then tap the "Settings" icon in the lower right corner.

2. Enter the camera settings interface, and then you can see the "Timer" button at the bottom of the list, and select the button.

3. Coming to the timer page, we select the time that needs to be set, and return to the camera interface after the setting is completed.

4. At this time, we press the shutter button, and the camera will take pictures at a timed according to the set time.