How does this configuration overclock How does the CPU set to overclock?

CZ's 3800+ is not necessarily super, it depends on whether you buy an early factory! Or when you buy it, is it a silent electric package over 3g! If it's a silent electric package, it's very easy to do, if not, it can generally be overpaid.

The success of CPU overclocking is also related to the constitution of memory, and I don't know the constitution of your memory for the time being!

If the memory can be 1000 on the silent electricity, under normal circumstances, ht is adjusted to 3x memory is adjusted to 667 the external frequency is directly on 300 octave unchanged all default voltages are OK!

If it doesn't work, reduce the external frequency.,Drop to 260 to see.,If it doesn't work, it's estimated that the memory is not good.,Add voltage to volts (it's safe below 2 volts)

Your motherboard isn't good, but it's still about the same when it's overclocked, and I don't know much about overclocking

My u is 4600+, the default is 200*12) just change the external frequency directly to 240, no voltage over, use the original fan, so your 3800+ as long as the external frequency is changed to 250 is OK

I have two screenshots in space, but you still change the frequency to a low point, and then add it to the top to make it safer

It can be overclocked under the system with AMD's official overclocking software.

com Soft, Express**: CF0808CMYJ01) is a system monitoring and adjustment software.

If the memory is not good, it will definitely not be able to get on!!

Turn on the computer, enter the BIOS, in the CPU options, there will generally be a position that supports overclocking, which is a set of numbers, for example, your CPU default frequency is 200MHz, then 200 will be displayed in this position, you can choose to change this external frequency in this position. If the external frequency is increased, then the frequency of the CPU will increase, and our purpose of overclocking will be achieved.

2.It should be noted that when overclocking the external frequency, it should be exceeded little by little, for the first time, you can first adjust to the external frequency of 205, and then restart to see if the system is normal, if it is normal, come back again, adjust to 210, if it is normal and then adjust, so adjust the external frequency again and again, until the system can not start normally when adjusting to a certain number, then add voltage to it, but also add it little by little, otherwise it may burn out. The first voltage to be added, restart to see if it can be restarted normally, if it can't be restarted, it is the overclocking limit.

The heat dissipation is also very important, if the heat dissipation is not good, not only is it super high, but it may also burn out the CPU. So be sure to have a fan that works well.

1 minute to teach you how to overclock your CPU.

The notebook seems to be a little difficult, it's not easy to disassemble, it's just to add voltage, but overclocking will greatly shorten the service life...

Take a look at the motherboard manual for yourself. This one is more detailed. Otherwise, you can only slowly explore it yourself. See where the CPU is set to the percentage. There is also a voltage one. It is better not to regulate the CPU voltage.

It's too vague but overclocking requires a K-series CPU and a motherboard that supports overclocking.