How do I fix 0xc00000e9 computer?

The computer 0xc00000e9 boot file is damaged, and you need to enter the PE system to repair it, and the method is as follows:

1. After entering PE, there will be a Windows repair tool on the desktop, you double-click to open, there will be a problem that allows you to choose to repair that disk, if your computer system.

I choose that tray when I install it, and I have a dual system.

You can choose any one.

2. After double-clicking the C disk, the following page will appear, and then click Auto-repair.

3. After that, there will be a repair status window, at this time, if the above prompts success, you can exit directly, what repair report, a few useless, if it is not successful, restart and try again.

4. After the prompt is successful, restart the computer and do not choose to download from the USB flash drive.

Boot, or it is better not to plug in the USB flash drive, at this time you can see the normal boot screen.

1. The system file is missing.

2. If you want to return to normal, you need a PE system with a USB flash drive or CD-ROM to repair it under PE.

3. C: Windows System32 Config Regback This folder will back up a system file, as long as there is a PE system, copy the backup system file to the config, and you can boot normally.

Error **0xc000000e is caused by a setup error, and the workaround is:

Equipment: Huaxiang Lu Zhi for the notebook.

System: win7.

Software: BIOS settings.

Version:. 1. When the computer is turned on, press F1 all the way to enter the BIOS settings of the computer.

2. Press the right arrow key on your computer keyboard and select "Start".

3. Press "Enter" in the startup item.

4. Enter the boot menu, and now you see that the first item is Windows Boot Manager, and you need to change the hard disk to the first boot item.

5. Press the down arrow key to select the hard disk, there are two in my computer, and the actual situation should automatically select the hard disk according to the computer.

6. Press the F6 key on the keyboard, and the hard disk will move upwards until the end of the first project, and then the hard disk will always be the first to start the project.

7. Next, you need to save the changes so that the changes will take effect. Press the keyboard F10 and a window will pop up.

8. Press Enter on YSE to complete the saving. The computer restarts automatically. Then see the computer go to the desktop.

Summary. Hello dear, <>

The 0xe0000008 fix for computer appearance is to run the system file check: press the win+x key, select "Command Prompt (Administrator)", enter the "sfc scannow" command and press enter, the system will automatically scan the system files and repair the corrupted files. Update Drivers:

Open Device Manager, find the device in question, right-click and select "Update Driver", and the system will automatically install the latest driver. Check the disk: Open "My Computer", right-click the disk you need to check, select "Properties", click the "Tools" tab, select the "Check" button, and the system will automatically check and fix the disk error.

Run System Restore: If the above methods do not solve the problem, you can try to run System Restore to restore the system to a previous point in time. Reinstall the system:

If none of the above works, you may want to consider reinstalling your system. Before reinstalling the system, you need to back up important data files and make sure that you have installation media such as an installation CD or USB stick.

How to fix 0xe0000008 computer appears.

Hello dear, <>

The 0xe0000008 fix for computer appearance is to run the system file check: press the win+x key, select "Command Prompt (Administrator)", enter the "sfc scannow" command and press enter, the system will automatically scan the system files and repair the corrupted files. Update Drivers:

Open Device Manager, find the device in question, right-click and select "Update Driver", and the system will automatically install the latest driver. Check the disk: Open "My Computer", right-click the disk you need to check, select "Properties", click the "Tools" tab, select the "Check" button, and the system will automatically check and fix the disk error.

Run System Restore: If the above methods do not solve the problem, you can try to run System Restore to restore the system to a point in time before the sale. Reinstall the system:

If none of the above is effective, a retrofitting of the infiltration system may be considered. Before reinstalling the system, you need to back up important data files and make sure that there is an installation CD or USB flash drive and other installation media.

The application is abnormal 0xe0000008 (the application is abnormal 0xe0000002 the solution is to restart the computer, press and hold the F8 key, start from the safe mode, enter the safe mode, and uninstall the unstable driver or problematic system grip patch. I wish you a happy life! I hope I'm helpful to you.

Summary. 1. Check the hardware: Check whether there is a problem with the hardware of the computer, and if so, please fix it in time.

2. Update drivers: Update the drivers of your computer to ensure the stability of the system. 3. Check the system files

Use the sfc scannow command to check the system files to ensure the integrity of the system files. 4. Check the system settings: Check the system settings to ensure the correctness of the system settings.

5. Reinstall the system: If the above steps don't solve the problem, you can try to reinstall the system to fix 0xc00000006 error.

1. Check the hardware: check whether the hardware of the computer is good or bad, and if there is, please fix it in time. 2. Update drivers:

Update your computer's drivers to ensure system stability. 3. Check system files: Use the sfc scannow command to check the system files to ensure the integrity of the system files.

4. Check the system settings: check the system settings to ensure the correctness of the system settings. 5. Reinstall the system

If none of the above steps resolve the issue, you can try reinstalling your system to fix 0xc00000006 error.

Fellow, I really didn't understand, I can be more specific.

0xc00000006 is a common Windows error** that usually indicates a memory access error and can be caused by a hardware or software issue. Reasons:1

Hardware problems: It may be due to a faulty memory module, or a poor connection of the memory module, or insufficient capacity of the memory module, or a mismatch in the frequency of the memory module, etc. 2.

Software issues: It could be due to missing or corrupted system files, incorrect system settings, or a viral sensation. Workaround:

1.Check the memory module: Check whether the memory module is faulty, or check whether the memory module is well connected, or check whether the capacity of the memory module is sufficient, or check whether the frequency of the memory module matches.

2.Repair system files: Use the built-in SFC tool to repair system files, or use a third-party tool to repair system files.

3.Scan for viruses: Use antivirus software to scan for viruses to ensure the security of your system.

4.Reset System Settings: Reset system settings to ensure that system settings are correct.

Personal tips Sun Cong: 1Check the memory module regularly to ensure that the memory module is functioning properly.

2.Scan your system regularly for viruses with antivirus software to ensure the security of your system. 3.

Regularly use the SFC tool that comes with the system to repair the system files to ensure the correctness of the system files. 4.Reset the system settings regularly to ensure that the system settings are correct.

Hello dear, this fault in the computer can be repaired, don't worry too much. 1. Press the corresponding BIOS button to enter BIOS when you boot up. The USB flash drive shortcut keys of various types of computers are different, and we can check the USB flash drive shortcut keys of Tuanzhi's own computer from the table below.

2. Move to the right to the startup item, you can see that the default of the UEFI legacy boot item is UEFI On this item, Li Qiao can see that there are a total of 3 options, you can choose Both, or Legacy and then press F10, select and exit. Just restart your computer. The above is the reinstallation system prompt 0xc000000d error solving tutorial brought to Da Na or Mengjia.

0xc000014c is a Windows system boot error** that usually appears when you start Windows. This error** can be caused by corrupted system files, hardware issues, or virus infections, among other reasons. Here are a few possible solutions:

Perform System Repair: You can use your Windows installation disk to perform system repair. Plug the installation disk into your computer, go to the BIOS settings, select Boot from Disc, and follow the prompts to proceed to System Repair.

Perform a system restore: If you previously created a system restore point, you can try using system restore to restore the system to its previous state. Search for "System Zheng Qisui Restore" in the Windows interface, and then follow the prompts.

Repair boot file: You can use the Windows installation disk to enter the command indicator mode and run the "bootrec fixboot" and "bootrec rebuildbcd" commands to repair the boot file.

Check for hardware failures: Sometimes, 0xc000014c errors** can be caused by hardware issues. You can check if your hard drive, memory, and other hardware devices are working properly.

Scan for viruses: 0xc000014c error** can also be caused by a virus infection. You can use antivirus software to perform a full scan of your computer.

Please note that before you do anything, back up your important data first to avoid data loss. If you're not sure how to fix the fault, it's best to call in a professional technician for assistance.

0xc000014c is an error message that appears on your Windows system, which usually means that the system files are corrupted or missing. The steps to fix this issue are as follows:

1.Enter safe mode: When the computer is turned on, press the F8 key and select "Safe Mode" to run the computer in order to repair the software that may be causing problems.

2.Run System Restore: Select the Start menu, search for and turn on System Restore, find a feasible point in time on a date of your choice, and follow the prompts to complete the restore.

3.Run the sfc scannow command: Open the command prompt with administrator privileges, enter the "sfc scannow" command, and the system will automatically check and repair the file.

4.Reinstall the system: If the above methods still do not solve the problem, it is recommended to reinstall the system or seek help from Zhengxian.

The above are some of the methods and steps to fix 0xc000014c errors, you can choose the appropriate method to fix your computer according to your specific situation and avoid similar problems from happening.

Workaround for 0xc000014c errors:

Check if the operating system is complete, and if not, reinstall the operating system.

Check if there is a virtual memory problem, check the virtual memory, and set it to auto-adjust.

Check for virus infection, and if so, clean it with antivirus software and reboot.

Check for hardware damage in your computer and if there is any need to repair or replace it.

Reset the BIOS, reset the BIOS settings to default, re-save and reboot the computer.

Use the System Recovery Tool to revert back to the previous state.

If there is a problem with the safe mode, it may be caused by software or drivers, Yuchang can try to uninstall them or update the driver. Celebration Chop.

Summary. When you get a 0xc000000e9 error** when Windows fails to start, it may be due to a recent hardware or software change, or because your computer's virtual memory is too low, so you can modify your computer's performance.

Here's how:

1. First find the computer on the desktop of the computer.

2. Then through the right mouse button, find the properties at the bottom, click on the properties, you will find the advanced system settings at the bottom of the left, click on the advanced settings.

3. After clicking on, you will also see three options in the menu bar at the top, and then we click Advanced, find the virtual memory, click Change, and the computer will return to normal.

4. If it doesn't work, F8 enters the safe mode, and then finds the latest security configuration, and the system will automatically repair it.

What to do when the computer won't turn on and there is a 0xc000000e9 error**.

When you get a 0xc000000e9 error** when Windows fails to start, it may be due to a recent hardware or software change, or because your computer's virtual memory is too low, so you can modify your computer's performance. Here's how to do it: 1. First find the computer on the desktop of the computer.

2. Then through the right mouse button, find the properties at the bottom, click on the properties, you will find the advanced system settings at the bottom of the far left, click on the advanced settings 3, after clicking on, you will also see three options in the menu bar at the top, and then we click on advanced, find the virtual memory, click on change, and then the computer will return to normal. 4. If it doesn't work, F8 enters the safe mode, and then finds the latest security configuration, and the system will automatically repair it.

Turn on the black screen, F8 can't get in, and Windows has a problem communicating with the device connected to the computing.

The status is 0 xc 00000e9

An exception occurred in the message.

Hello dear [Eat Whale] You can try to shut down and restart.

The shutdown has been done many times, but it doesn't work, it may be a system error problem and you may have to redo the system.