Is it better to have a hexagonal sleeve or a 12 cornered sleeve head

It is better to use a hexagonal than 12 corners, the nut will not slip, the side of the hexagon should be longer than the side of the 12 corners, put the hexagonal nut.

Even if the nut is a little smaller than the conventional when processing, it doesn't matter, it can still be used, but with a 12-angle sleeve, the angle of the six-nut is easy to slip, once it slips several times, it can not be unscrewed with the sleeve, the nut and screw processing is the use of extrusion and rubbing technology, so the size of the nut is often not standard, so it is recommended to use a hexagonal sleeve, and the 12-angle sleeve is also called plum blossom-shaped, which has been replaced by a hexagonal sleeve.

The choice of socket head varies from person to person, but here are the pros and cons about hexagonal socket heads and 12 socket heads:

1.Hexagonal socket head:

Advantages: This sleeve head is not easy to slip, allows for better control of force and angle, and can use less torque to tighten and loosen the nut. In addition, the side of the hexagonal shape is longer than the side of the 12 corner, so it can be used normally even if the nut is a little smaller than the conventional one when machining.

Disadvantages: When using a hexagonal socket head, you need more space for the wrench to turn the angle, and if the wrench does not have enough space for the angle of turn, it may not be usable.

2.12 Corner Socket Head:

Advantages: The working angle of this sleeve head is smaller than that of the hexagonal socket head, so it is more convenient to use. In addition, it can be used in small working areas and in some cases can be used as an alternative to hexagonal socket heads.

Disadvantages: Due to the shape of the 12 corners, the sleeve head is more prone to slippage when tightening and loosening the nut. Once it slips a few times, the sleeve head may no longer be able to tighten the nut.

To sum up, hexagonal socket heads and 12-angle socket heads have their own advantages and disadvantages. Depending on the specific job needs and use environment, it is key to choose the most suitable socket head type. In some aspects of control that require high precision and power, a hex socket head may be more suitable; In some situations where less space and more convenient handling are required, a 12-angle socket head may be more suitable.

Socket wrenches are generally classified according to size (referring to the size of the square head): 1 4 , 3 8 , 1 2 three specifications, is the meaning of inches, 1 is equal to.

Because the sleeve is set on all kinds of wrenches and shaped like a cylinder, it is commonly known as the sleeve, which is a commonly used tool for production, maintenance and life. A special tool for tightening or loosening screws. It is composed of several inner hexagonal sleeves and one or several upper sleeve handles, and the inner hexagonal sleeves of the sleeve are arranged in sequence according to the model of the bolt, and can be selected according to needs.

The socket wrench is composed of a plurality of sockets with hexagonal or twelve-angular holes and is equipped with a variety of accessories such as handles, adaptors, etc., and is especially suitable for tightening bolts or nuts with very narrow or deep recesses.