The network latency is high, hopping ping, how to ping the delay of the website?

By default, the Windows Network Connection Packet Scheduler limits the system to 80% of the connection bandwidth, which is a significant expense for networks with small bandwidths. We can use Group Policy settings instead of the default to increase our Internet speed by 20%, the specific operation steps are as follows: 1

Click the Start menu, and then click Run, and enter in the Open text box in the Run dialog box that appears"command, click OK, and launch Group Policy Manager. 2.Computer Configuration, then the Administrative Templates sub-project, Network, and click to select the QoS Packet Scheduler item.

3.Double-click "Limit Reservable Bandwidth", set the item to "Started", and set the "Bandwidth Limit" to "0", and you're good to go4Click the OK button for the settings to take effect.

In the future, the ping will generally be controlled within 80.

And turn off 360 when playing cf, turn off 360 with 360 task manager, (find it in 360) ordinary task manager can't turn off 360. Then turn off all unnecessary software that occupies the network speed with 360 Task Manager, and when all 360 software is closed, then use 360 Task Manager to turn off 360 Task Manager. Otherwise, 360 really takes up memory.

In this way, when playing CF, the speed can be one or two times faster, no problem.

The ping is within 50. It can also be accelerated with acceleration software.

I don't know if there is an interruption after entering ping -t in the run, if the local address is ping. For example, if there is no interruption, it is recommended to change the DNS address to try, if you don't know, you can consult the operator, if there is an interruption, it is a problem with the local network, it is recommended to replace the network cable, and it is not possible to change the computer to try it, you can only eliminate it one by one! If you don't understand, you can continue to ask.

Tested the network. Make sure the internet speed is OK. Thunderbolt acceleration try.

I think it's better than Xunyou. The way to open the box with Thunderbolt acceleration is to use Thunderbolt acceleration to run the game first. Then close the game.

Then use the box to open the game. That's it.

You see if there is a problem with your network card, you fix it. It really doesn't work, update your driver. good luck。

IP Accelerator is very easy to use, try it.

1. Windows+R brings up the running interface.

2. After bringing up the running interface, enter cmd and click OK.

3. Enter the running interface and enter the ping IP address in a foolish manner.

t (e.g., ping -t or ping -t) and press enter.

4. After entering the car, the delay time filial piety will accompany the balance.

Summary. <>

Dear, I am glad to answer for you: the reasons for broadband network ping hopping are as follows: 5. Network problems, resulting in network hopping on the network.

Solution: 1. Replace a network cable, reconnect, and ping the network again; 2. Reinstall the network card driver (it is recommended to go to the latest version of the driver of the corresponding model of the network card brand); 3. Replace a network card, reinstall the driver, and then network and ping the network; 4. Check and kill viruses completely, and then reconnect to the network and ping the network; 5. Call the network operator** and ask the other party to check whether the line is normal, if the ping is serious, you can ask the maintenance personnel to come to deal with it.

What should I do if the broadband network jumps ping?

I am a broadband broadcaster.

Dear, I am glad to answer for you: the reasons for broadband network ping hopping are as follows: 5. Network problems, resulting in network hopping on the network.

Solution: 1. Replace a network cable, reconnect, and ping the network again; 2. Reinstall the network card driver (it is recommended to go to the latest version of the driver of the corresponding model of the network card brand); 3. Replace a net wild potato card, and reinstall the driver song potato program, and then connect to the network and ping the network; 4. Check and kill viruses completely, and then reconnect to the network and ping the network; 5. Call the network operator** and ask the other party to check whether the line is normal, if the ping is serious, you can ask the maintenance personnel to come to deal with it.

My desktop cable will skip the ping delay of more than 300.

The pro-connection network cable will skip pings with a delay of more than 300, which is a problem of the network itself. It's also possible that there is a problem with the router.

To reach the maximum speed, the network cable between the router and the cat, and between the cat and the computer should not exceed 3 meters, otherwise the signal will be weakened.

Under normal circumstances, the ping delay should be between 1 and 100 milliseconds. Ping is a tool to check the quality of the connection between computers or network devices, which tests the connection between devices by sending ICMP (Internet Control Message Protocol) packets. After sending a packet, the ping tool records the time it takes for the packet to be sent from the packet to the reception, which is known as the delay time.

Latency is affected by a variety of factors, such as network congestion, router response speed, packet size, and load on the destination server. In general, if the ping latency is less than 100 milliseconds, then the network connection speed should be normal. If the latency is more than 100 milliseconds, you may feel a slower network connection.

Of course, not all cases where a latency of more than 100 milliseconds means that there is a problem with the network connection. In some cases, you'll need to factor in the latency along with other Keykey network connection parameters. In addition, the quality of network connectivity is affected by factors such as geographic location, carrier, and network settings.

If you notice that the ping lag persists for more than 100 milliseconds, you can try restarting your router or contacting your ISP to resolve the issue. At the same time, you can also check your network connection settings and scan for computer viruses to ensure your network's security. If all the issues have been ruled out and your internet connection is still slow, then you may want to consider upgrading your internet connection or changing your internet service provider.

Overall, a ping delay of more than 100 ms doesn't necessarily mean that there is a problem with the network connection, but there is a combination of latency and other parameters to consider. If you find that the network connection is of poor quality, you should take effective measures to increase the connection speed to ensure that you can work and study more happily on the network. <>

How to do broadband network hopping pro! Hello, I'm glad to answer for you<> dear, the solution to the broadband network hopping is as follows: 1. Try to shorten the distance Take the home wireless LAN as an example, if you find that the wifi network is not particularly stable, always lose packets, skip ping, then the reason for this problem may be the distance problem, When the distance between the first grip of the user and the router is far away or there are multiple layers of obstructions (walls, doors, etc.), the signal will be much weaker. You can try shortening the distance between the device and the router and you will be able to solve the problem.

Second, replace the connection of many network problems, although it seems that the network is unstable, but in fact there are problems with the equipment used by the user, such as viruses, Trojans, network hijacking, etc., which will lead to network instability, the most intuitive embodiment is to jump ping, in this case, do not change the network settings in the router casually, but should change a device to connect to the wifi network, to see if there is a jump ping phenomenon, if the phenomenon disappears, it proves that there is a problem with the device, Check the device, kill the virus, and clean up the hijacking to restore the device. 3. Clear the interference source If the problem still exists after checking according to the above two methods, then it is necessary to carefully observe whether there is an interference source near the equipment and the router, such as more metal objects, refrigerators, induction cookers, coils, etc., such equipment will cause interference to the wifi network and affect the normal transmission of the signal. Hope mine can help you <>

Do you have any other questions?