How do you flash a Huawei phone Y511 Do you have to have a memory card?

Card brushing requires a memory card, not a wire brush.

Here's how:

Mobile method: The mobile phone is completely turned off first, and then the mobile phone is turned off at the same time to press and hold the mobile phone.

Volume up button and power button,Press and hold the volume down button immediately after vibrating,Press and hold the three keys until the G3 screen is displayed,It's recovery。

Unicom version method:The phone is completely turned off first,Then the phone is in the shutdown state at the same time press and hold the power button for a second or two,Quickly press and hold the volume plus and down the volume before the screen lights up,Three keys don't let go,It's in recovery。

3: After the phone enters the state cavity and recovers, use the volume button to select [Erase All Data and Factory Reset], and then select [Yes - Erase All Data] and then press the power button to confirm.

4: Return to the main interface of recovery, then use the volume key to select [Clear Cache Data], then select [Yes - Clear All Cache] and press the power button to confirm.

5: Return to the main interface, press the volume button to select [Install Flashing Package from SD Card] and then select [Select Zip File from SD Card], then find the ROM flashing package in Zip format that you just copied to the root directory of your phone's SD card (for example, and then select [Yes - Install].

Press the power button to confirm.

6: After waiting for the flashing to complete the repentance, return to the upper menu, and finally select [Restart Phone].

Note: The first boot may be slow after flashing, wait patiently.

Every phone has its own way of flashing. It is recommended that you go to your phone's post bar or forum boutique area to find relevant tutorial posts, which generally have detailed tutorials.

1: Check whether the phone is connected to the computer with a data cable.

3: Make sure that there are files in the dload directory, and then copy the entire dload to the root directory of the SD card. (Note: It must be the root directory, otherwise it cannot be flashed).

4: When the phone is powered off, insert the SD card, and press and hold the volume up button + volume down button + power off button of the phone at the same time, and the phone will automatically recover the interface.

<>6: After selecting, press the power button to confirm, and then it will automatically enter the upgrade interface, and it will automatically turn on after the upgrade is completed.

7: Brushing completed.

Get root access and use the computer flash wizard to flash the computer.