-
Hello. Please try it out according to the following two points:
1.Please back up your data first (by turning on System and Security Backup to create a new backup. Then, enter recovery (power off, press and hold the volume on + power button to enter recovery) mode, clear cache, clear user data, clear all data, restore backup, settings and third-party security software in the phone do not recover.
Try if it works properly.
b.During this time, please back up your data, enter recovery (power off, press and hold the volume up + power button to enter recovery) to clear the cache, clear user data, clear all data,. The computer is equipped with a driver (you can find a Xiaomi mobile phone assistant to connect to the phone, and the driver components will be automatically installed), **a miflash flashing tool.
c.When everything is ready, please follow the flashing tutorial on the official website to use the sixth line brush, which is the official flashing tutorial:
-
It may be that your power button is broken, or it may be that you have set some mode, it is best to restore the factory settings, if it still does not work, it is recommended to contact the after-sales service.
-
Depending on the situation you described, you can try the following:
1.Charge with a cable charge for a while and try to turn it on, or replace a phone battery of the same model.
2.Take out the SIM card and SD card at the same time and try to power on again.
3.If the issue persists, it may also be related to third-party software that you have installed yourself**. When you see the logo icon when you reboot, press and hold the [Menu Key] (left touch sensitive button) until the word "Safe Mode" appears in the lower left corner of the screen, and then let go.
4.If you still can't turn on the app after uninstalling it, you can follow the above methods to enter the "safe mode" and back up your data (for example: Bihu contacts, SMS, **, etc.) and restore the factory settings.
5.If you can't enter the safe mode and can't turn it on, it is recommended that you bring the three-pack certificate of your mobile phone and send your mobile phone to the nearest service center for testing and maintenance!
I hope my confession is helpful to you, and if you have any doubts, please continue to "follow-up"!
-
The system is broken, so you can only flash the machine.
-
Unplug the battery and put it on and try it.
-
Hi! Please go to a repair center near you or Xiaomi Home to have it tested.
Mi Home is open from Tuesday to Sunday, from 10 a.m. to 6 p.m.
If you don't have a branch near you, please go to Xiaomi's official website.
-
The reasons and solutions for not turning on the machine are as follows;
1.The battery is out of power and can't be turned on, so you can turn it on when you charge it.
2.The system cannot be turned on due to the bricked system, and the official firmware can be re-flashed to boot.
3.If the hardware failure causes the machine to fail, you can turn it on by going to a store or after-sales inspection and maintenance.
-
Hi! Please remove the battery and reinstall it, try to enter recovery (power off, press and hold the volume up + power button to enter recovery) to clear the cache, clear user data, clear all data, (if you have not backed up data before, then all the data in your phone will be cleared) Use the line brush to re-flash a complete line brush package, you first on the official website ** the latest development version of the line brush package. Turn the computer to the driver, ** miflash flash tool, use the line brush on it.
b, please flash according to the flashing tutorial, flashing tutorial.
Mi 2 is still not good, it is recommended that you send it to your local repair point for testing, address and ** query hope to help you.
A more detailed description of the problem will help netizens understand the troubles you are encountering and help you solve the problem more accurately. Thank you for supporting Xiaomi phones!
-
Pull out the battery and reboot it. Either it's a problem with the system, flashing.
-
Press and hold the power off button, if it doesn't work, you can directly pull out the battery and restart. If this problem often occurs, it is a problem with the mobile phone, and it is recommended to flash the system. It is normal for Xiaomi phones to have this situation, and half of the mobile phones will freeze or restart.
-
Press and hold to turn it off, if it doesn't work, you can directly pull out the battery and restart. If this phenomenon persists, it is recommended to flash the system.
-
Buckle the battery, if you reattach the battery. The only way to contact customer service is to contact you.
-
I've also encountered a situation where the touch screen fails, and your Changan power button will automatically shut down. If it still doesn't work, pull out the battery.
As long as you don't do it often, it's fine.
-
Hello. This is because the phone has a proximity sensor on the top, and when you are talking and the top of the screen is blocked, the screen will go black. When there is no covering, it will be lit. This is to achieve the purpose of saving electricity. All major touchscreen phones have this feature.
If your phone has a black screen when the proximity sensor is not obstructed when you are talking, it is recommended that you restart your phone and try to see if it is normal. Or check to see if your protective rubber film is blocking the proximity sensor above.
Still can't work, it is recommended that you try the following operations in the normal state of your phone:
1. You calibrate the proximity sensor.
Enter * on the dial-up screen
2.Select the twelfth item "Proximity Sensor Test" in the hardware test that pops up
3.Click Start Calibration (Note: Do not obscure the proximity sensor during calibration).
4.The calibration passed, and it was successful! (You can dial and set the anti-false touch mode to test whether it is normal).
5. If the calibration fails, you can tear off the film on the right side of the MI character and try to recalibrate it.
6. Try to restore your backup to factory settings.
Back up data: Go to Security Center - Backup - Create Backup, select all data for backup, and it usually takes 3-5 minutes.
Factory reset: Click the phone menu button - System Settings - All Settings - Backup & Reset - Factory Reset - Turn on Delete Apps, turn off Format SD card, and click Reset Phone below.
7. If you don't need this function of the proximity sensor, you can turn off and enable the proximity sensor in the call-menu key-settings-status setting when calling.
-
Hi! 1. If your mobile phone is synchronized with the Mi account and the Find Phone function and network are turned on, you log in on the computer, click Find Your Phone, click to lock the phone to set a password, after the phone receives the information, you enter your newly set password, you can unlock it, so that your phone will return to a passwordless state, and then you can reset the password.
2.If you are not using a Xiaomi account, you can only enter recovery mode and clear the data. But if you haven't backed up your phone before, all the data in your phone will be erased.
The method is: in the shutdown state, press and hold the volume plus key and the shutdown button, and let go when the boot screen appears, and you can enter recovery. Go to Recovery >Chinese >> Clear Data >> Empty all data
-
Hi! If your phone was connected to the Internet, you can insert the original SIM card and enter the account password to complete the boot.
If you don't have the Internet, the lock screen password is to protect your privacy and security, if you forget, it is inevitable to clear the user data, if you have not backed up the data before, it will clear your personal data, you can enter recovery (shut down, press and hold the volume up + power on key to enter the recovery mode) Choose to clear the user data, and then reboot to the nearest system to boot up.
Xiaomi phone flashing tutorial:
Hi! Xiaomi.com will complete the delivery in about 7 days according to the payment order, and our goods will be shipped within 24 hours at the earliest. At the same time, please be reminded that the actual delivery time order may change and adjust due to various factors such as the user's location, logistics third party, payment delay, etc. >>>More
When the shutdown is forcefully closed, some background programs are forcibly closed, resulting in a sudden increase in battery load, so the battery will drop to a great extent, there are many cases of domestic mobile phones, hope!
Slow or unavailable Internet access, failure to open or close web pages. If this fault occurs, the hardware, network card, slow network speed, or virus can be ruled out. It is usually caused by the incompatibility of the program software or plug-ins in your computer with the system. The solution is as follows: >>>More
I think that if one person doesn't like the other, too much coercion will have a bad effect. You should be empathetic, what would happen to you if a woman who didn't like you kept chasing you? Will you accept her because of her sincerity? >>>More
Basically, you have to send it to customer service to repair, but it is more expensive, and the maintenance fee of 229+50 is broken, and you don't need to repair it