How to distinguish between solid wood furniture and veneer furniture

Generally speaking, veneer furniture is divided into solid wood veneer furniture and sticker furniture, veneer furniture generally feels rough and has a very textured texture, while sticker furniture is smoother and the color looks more uniform. When I first moved into the new house, my wife bought a table with wooden veneer, which felt pretty good.

Many people think that wooden furniture is very simple, and putting a few wooden tables and chairs in the living room can improve the grade of the whole space, especially pure solid wood furniture. However, due to the lack of understanding of solid wood furniture, it is impossible to buy real solid wood furniture, and may use sticky solid wood furniture to camouflage. Look at the chromatic aberration.

Nowadays solid wood furniture rarely has a complete material, it is joined together, so the color of solid wood furniture may also be different. If the color is the same, it may be mottled or fake.

Both inside and out. The color inside the real board will not be too different from the color outside, you have to look at the inside of the drawer like a cabinet, the color is about the same as the outside, and vice versa. This is evident when you look at the bottom seam on the ground.

The external pattern is very neat and there is no breakage, so it is necessary to paste the leather solid wood furniture, because pure solid wood furniture will not have a very complete pattern, if the solid wood business is pressed on a layer of solid wood veneer, this is also to fool you, so don't believe it. Because unless it is waste wood, that is, solid wood, the effect will be much worse. Generally speaking, good solid wood furniture will use mortise and mortise craftsmanship rather than drilling holes like this, so you can further confirm that it is not real solid wood furniture.

Real wood, the gloss is different from different angles. Sticky solid wood furniture is definitely incomparable to pure solid wood, and it is lower, so be sure to keep your eyes open when buying. Generally speaking, the texture of the front and back of the panel is the same, the texture and the frame surface are frontal, usually belonging to pure solid wood furniture, on the other hand, it is veneer furniture, and the feel of solid wood furniture is rougher, the feel is more textured, the feel is smoother A lot of veneer furniture, and the color is better than pure solid wood furniture, and the veneer color of the furniture is also the same.

The durability of solid wood furniture is relatively high, it is not easy to get wet, and the texture is relatively clear, and the veneer furniture is easy to peel off and rough to the touch; It can be determined by whether there is a scar, good solid wood furniture has a certain scar, while veneer furniture does not.

It can be judged by the symptoms, judged by the color, and the best way is to determine the sound of the wood by tapping.

Solid wood furniture is very heavy, the pattern is not neat, the veneer furniture pattern is neat and uniform, and the weight is lighter; Compare the pattern and color, whether there is a big difference.

Nowadays, there are many types of solid wood furniture on the market, and you should choose carefully when buying. How to distinguish between solid wood furniture and solid wood veneer furniture? PChouse will take you to find out.

There are still the following differences between solid wood furniture and solid wood veneer furniture: wood veneer - wood grain, wood rays are clear. There are natural blemishes.

Because the veneer has a certain thickness (, when making furniture, when encountering two adjacent interfaces, they usually do not turn, but stick one piece each, so the wood grain at the two interfaces should not be connected. Solid wood – wood grain, wood rays (if any, usually "needles") are clearly visible, and there should be some natural imperfections (knots, spots, etc., black lines, etc.). For the same piece of solid wood, whether it is a plank or a strip, the wood grain at the interface between the two sides should be able to clearly see the natural connection between the longitudinal section and the cross-section (solid wood furniture, the natural connection of the wood grain at the junction).

There is a natural color difference on the surface of all solid wood furniture, and there will be certain differences in its color and texture. If the texture, color, and material of the solid wood itself are very good, and the material selection is excellent, veneer is generally not needed. Veneers often mean "facelift", which also means that products with good color and material, and no skin stickers, are usually more valuable.

All solid wood furniture, no splicing of the whole wood) In addition, there are stickers on the market, imported wood grain stickers look no big difference from wood veneer, wood grain, wood rays are clearly visible, if it is imported high-grade paper, even wood flaws can be imitated, but there is still a difference with natural wood veneer, it seems more fake. Sticker furniture is prone to revealing flaws in the corners. In addition, due to the small thickness of the wood grain paper, it will be directly wrapped at the junction of the two planes, resulting in the wood grain at the two interfaces being connected.

To determine whether the furniture is solid wood or veneer, you can observe the wood grain, distinguish the taste, observe the internal material, observe the process, etc.

1. Observe the wood grain. At present, solid wood raw materials are expensive and less and less, and many areas are restricted from cutting down, so generally speaking, many solid wood materials used in solid wood furniture are solid wood processing boards, and the wood grain is not continuous. Therefore, if the wood grain of a large area of components is beautiful and symmetrical, it must be non-solid wood furniture.

Especially be careful with the furniture that comes in a set.

2. Distinguish the taste. The smell of solid wood furniture is generally not too strong, not pungent, and has the smell of natural wood. The third is to observe the natural defects of wood.

Look at the location of one side with scars and knots, and then look for the corresponding pattern on the other side. If it is asymmetrical, it must be non-solid wood furniture.

3. Observe the inner material. Some furniture will be equipped with hinges, hooks, handles and other parts, which can be removed and observed whether they are solid wood through the joint between these parts and the substrate.

Fourth, observe the process. Generally speaking, in order to express the real texture of wood, manufacturers will generally only coat the surface with varnish or matte paint. Wood-based panel furniture is generally a box structure connected by hardware, when buying furniture, observe the connection between the furniture board and the board, if you see a three-in-one eccentric connector, etc., it is likely to be wood-based panel furniture, need to pay attention.

See if the wood grain is very regular, the wood grain on the ** is very regular, and the wood grain is perfect, commonly known as very fake. Pay attention to this because logs are irregular. Pay attention to the place where the core board is milled, whether the grain of the plane and the profile can be connected, and the wood grain should have obvious turns.

Check whether the lines on both sides of the door panel are consistent. This method is generally suitable for obvious wood grains, such as red oak, with rough brown holes and water-grained shapes.

However, it is difficult to distinguish between delicate wood grains such as rubber wood and tulipwood. If there is a scar on the door panel, the scar on the front and back of the door should correspond. Therefore, it is sometimes possible to distinguish by looking at the front and back of the door.

The two pictures below are the front and back of the door core panel, with a wood scar on the opposite side. If it is attached to the **, it will not. The color of the cross-section is darker than the color of the panel, and it can be seen that it is made of a single piece of wood.

The key is to distinguish whether it is solid wood furniture by the smell of the furniture. When people choose furniture, they tend to focus on solid wood furniture with relatively little paint.

In today's focus on health and environmental protection, in fact, in the dazzling array of wooden furniture, there is also a kind of imitation solid wood furniture if it is real wood, especially the texture and the front texture must be aligned. For example, the color of the back of this bed will be a little different. Pure solid wood is mainly spliced production, which is very different from solid wood in color.

If the color is fake like solid wood, it can definitely be pasted. If you look at this bedside table again, you will feel that the texture and color are different. This should be real wood.

If the bedside table is real or fake, look inside its drawers, not only on the outside, but also on the inside. The color inside the board is not much different from the color on the outside. If it's too big, it must be fake.

It is generally real solid wood, and the pattern on the outside of the bedside table is the same as the one on the inside. If they are different, they are fake. Another way is to look at the bottom seam of the bedside table, which is more obvious, especially the texture and thickness of the bottom.

Real solid wood furniture is made with a high level of mortise and tenon technology. If it is veneer furniture, you only need to look at these two openings to know whether it is veneer furniture. The wood grain of the side panels is completely misaligned, and it is certainly not solid wood furniture.

The best way is to look at the weight of the furniture first, so that you can understand the quality, and then when you knock on the furniture to see if there is a gap in the sound, so that you can judge whether it is solid wood furniture, and most people will use this method when buying.

My method is to identify by color, by material, by form, by cross-section, by feel, these can be directly distinguished.