-
Maybe you make a modulation error The above picture is coming, I'll help you look at the debugging **Wrong, give you guidance, you just open the settings, don't click on the others.
-
After the first successful mass production.
Remove atuorun checkbox.
In the re-mass production into ordinary plates.
before it can be mass-produced into a CDROM again
-
If you have a problem with your mass production tool, use the model number of the main control to read, and I will help you get it.
-
The question is complex ...
First of all, you need to rule out the limitations of the software database, you can use chipgenius to test again, if the results are the same, it means that it is not a software problem.
Second, if it weren't for the software problem, theoretically, if the chip manufacturer was the original Kingston, it would definitely be Kingston, if not, it might be the Kingston brand hung by other factories, and there was a possibility that it was a counterfeit. But you this pellet is sandisk indicating that the quality should be okay (even if it's fake Kingston).
Third, Huirong does produce memory cards, USB flash drives, and it is possible to OEM for Kingston.
Fourth, if you want to know how the quality is, first of all, the particle is sandisk, which means that the quality should be okay, and secondly, you see if it is an expansion disk, use mydisktest to detect it, and then measure the speed, if the speed reads 7m s, write 2m s, it means that your U disk is okay.
-
Kingston's USB flash drive,It doesn't mean that the chip is Kingston's,Kingston uses several chips,Including Huirong,Use software to check whether it is expanded,If it's a real 16G,There is no problem with use。
-
Needless to say, Huirong quality. Good or bad, no. Now through the ** on you, this USB drive is not**. There you know ...
-
After mass production, 0 bytes are displayed, it must be your mass production error, it is estimated that your memory chip was selected wrongly, and it can only be mass-produced again, and a few more mass productions will generally not cause any major damage to the USB flash drive.
You disassemble the USB flash drive, look at your main control chip model and memory chip model, and then find the corresponding mass production tool for mass production.
-
The original U disk mass production tool lowered it into an ordinary disk.
-
Generally, 0 bytes means that there is no repair value.
-
Is there really no other way?
-
There are so many places to go to the digital house. Mass production tools. But. Ask for money
Pity. You can also find it. Tired
-
This situation probably probably basically en. You can get a new one.
Mass production tools are changed based on memory control chips, so there is no need to expect mass production tools to fix this situation.
The old doesn't go, the new doesn't come.
-
Are you using the wrong chip mass production tool?
Reminder, if you mass-produce a system disk, your disk is like a CD, which can only be read and not written! Of course, you can't use the capacity of the USB flash drive!
-
Do you want to buy a USB flash drive of Huirong's main control solution?? Then when you buy a USB flash drive, use the chip wizard to detect the USB flash drive you want to buy!!
Remind you, Sony does not produce USB flash drives!! The so-called Sony USB flash drive is a counterfeit product!!
-
There will be a lot of them, except for the model to match, you have to try them one by one, not sure which one can be used.