What should I do if my Piaget watch is magnetized?

There is a special mechanical watch demagnetizer for mechanical watch magnetization, and there is no need to open the back cover of the watch, and the demagnetizer can be turned on the watch a few times to eliminate magnetization. You can go to an experienced and professional watch repairer** to deal with it.

You can get a professional watch repairer** to deal with, and there is generally a special demagnetizer for watch repair, so you don't need to disassemble the watch. You can cancel the magnet.

How to deal with the watch stopped by magnetization:

Holding the watch slowly close to the hair dryer, note that you should always keep it in one direction, and then move away slowly, generally to eliminate the lighter magnetism.

Using the degausser, press the red button to open it first, face the watch upwards, keep a certain distance from the demagnetizer, (the mobile phone watch cannot be directly attached to the demagnetizer) pass through the left and right (or from right and left) at a constant speed.

For some watches, it comes with an anti-magnetic device, if there is magnetism, then you should go to a professional watch repair shop to ask the maintenance personnel to replace the anti-magnetic device and demagnetize.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

Magnetic field is everywhere, it is impossible to prevent it, and the watch that has always been very accurate in the time has suddenly appeared in the situation of time error, and the first thing to guess is whether the watch is magnetic. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the first situation that affects it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

Moreover, in the development of today's social life, more and more electronic products appear around us. Therefore, the magnetic field is present around us, and there is only a difference in the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel.

There is also the magnetic buckle on the leather bag, and the watch and credit card are the most afraid of being stained with magnetism. Mechanical watch magnetization is generally fast (serious will stop), if the hairspring is stuck together, the watch will go faster, about 2 hours or so faster. Steel parts are most susceptible to magnetization, including escape wheels and pallet forks.

The simple way to tell is to use a sensitive point compass and lay it flat. Then the watch is quickly and repeatedly skimmed over the top of the compass at close range, and this action also needs to change the watch in a few more directions, and then repeat. As long as the needle of the compass moves, it means that the watch has been magnetized.

The principle of the demagnetizer is that it can produce an alternating magnetic field, and if the watch is placed in this magnetic field, it will be demagnetized, and if it is a constant magnetic field, it will be magnetized. Demagnetizers can be bought or made by themselves, and generally professional watch stores have demagnetization services. Moreover, in your daily life, you must be careful not to place your watch near or near electrical appliances that generate magnetic fields (such as stereos, refrigerators, computers, etc.), or magnetic objects (such as magnets, mobile phones).

Hello, it is possible that the watch is magnetized or the power is insufficient.

Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day. When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances.

Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

Watches often appear next to these electrical appliances (mobile phones, televisions, computers), and when magnetized, they can affect the timing of the watch at least or stop it directly. Although you can degauss according to the method on the Internet, it is easy to have unclean degaussing, which affects the operation of the movement. The need for degaussing is actually very simple, it is recommended that you go to a professional maintenance network to use the demagnetization machine, which can be perfectly solved in a minute or two.

Because there are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, watches are very easy to be magnetized.

The speed of a mechanical watch is controlled by a hairspring and a balance wheel. When the watch is magnetized, the magnetic force causes the frequency of the balance to swing, so the speed of the gear system also changes, and the watch may stop, slow, or fast. If the symptoms are mild, the daily error is tens of seconds. In severe cases, the daily error is several points.

In daily life, it is necessary to avoid placing the watch next to electrical appliances (such as stereos, refrigerators, computers, etc.) that generate magnetic fields, magnetic objects (such as magnets, mobile phones), and women use handbags to open and close magnetic buckles, and men use mobile phone covers to turn magnetic buckles, which may cause the watch to be inaccurate or temporarily stopped. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to return to normal.

You can go to the watch shop or warranty point to find a watch repairer to repair.

Magnetization of the watch: Many things with magnetic fields are often together with the watch, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede by itself, in which case it can only be demagnetized. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

Hello, the watch will cause the problem of inaccurate time after being magnetized, although the quartz watch will not be magnetized, but there will be a phenomenon of stopping in a strong magnetic field. Therefore, when using the watch in daily life, it must be kept away from the magnetic field, away from TV, radio, induction cooker, etc., which will be magnetized due to long-term contact.

Many friends may be very confused, how can you tell that the watch is magnetic? There are many reasons why the watch is inaccurate or does not go, and the magnetic field in our daily life is everywhere, in order to accurately judge whether the watch is magnetized, you can use a flexible compass, put the compass flat on the table, hold the watch and shake it back and forth above the compass, if the needle of the compass moves, it means that it is magnetized.

There are two ways to degauss:

Methods of degaussing.

First, it is a professional demagnetization of the watch shop.

Methods of degaussing.

2. If you are far away from the watch repair shop, you can also demagnetize yourself, the specific method is: find a piece of iron that is hollow in the middle and is not affected by magnetization, stand firmly on the table, and then the magnetism on the watch can be "sucked" by the iron block to restore the watch to normal. It is to use a magnetized iron can, the two ends are connected, and the magnetized love watch can be demagnetized by moving back and forth in the iron can for 5-6 minutes.

The contact between the watch and an object with an excessive magnetic field causes the watch to be magnetized, resulting in inaccurate timekeeping of the watch. After being magnetized, the watch may stop, slowly or quickly. The symptoms are mild, with an error of tens of seconds per day.

In severe cases, the daily error can reach several points. The magnetism of the watch will not subside on its own after being magnetized, and it will only return to normal after demagnetization at a professional watch restoration center**.

What to do if Piaget watches are magnetizedDo you know watches? Compared with quartz watches, mechanical watches have certain errors in themselves, and the coordination and stability of the oscillation system (including the escapement system and the balance spring system) are the main factors determining whether they can be accurately timed. These are hardware problems that exist in the movement itself, which cannot be avoided, and small errors are reasonable.

The allowable error range for quartz watches is seconds, and the average daily difference for a mechanical watch must be in the range of -15 seconds to +15 seconds, and in the case of a chronometer-certified mechanical watch, the average daily difference is in the range of -4 seconds to +6 seconds.

Watch magnetization treatment method: 1With a finished watch demagnetizer, about a few tens of yuan a piece (the inside is a coil, with an iron core in the middle, connected to 50Hz alternating current, generating alternating magnetic field demagnetization), can also be self-made;

2.Put the watch on a non-magnetic iron plate for a few days, the magnetism will be conducted to the iron plate, of course, the larger the volume of the iron plate, the greater the magnetic capacity, and the better the effect;

3.Slowly pass the watch through a non-magnetic ring, which will be left on the ring;

4.The most common and safest way, if it is too troublesome or feel that you can't get the magnet clean, then you can go to the watch shop or warranty point to find a watch repairer to repair.

The post-processing of the watch is very simple, take it to the customer service center. You don't need to open the cover, you can directly use the degauss device to demagnetize, and the watch can return to normal in 2 seconds. If you want to degauss yourself, you can also try the following two methods.

1. Find an unmagnetized iron ring, put the watch in the ring, wear it slowly, and after a few minutes, the watch will be demagnetized and restored.

2. The effective part of the induction cooker plate is generally round, and the coil is below, if you do not put a large enough steel object, it will generally automatically protect from starting, we had better find a steel water cup (represented by a red circle) filled with water, or other steel containers, in short, do not cover the center of the induction cooker, and it is enough to make the induction cooker start. Then start the induction cooker, it is best to use the maximum power, the watch or tool to be demagnetized, from the far left side of the stove close to the surface of the induction cooker, through the center point of the induction cooker to the right far away, so repeat several times, pay attention to enter from one direction, can play a good degaussing effect.

It is best to send the watch repair department to degauss, because there is a special equipment for demagnetization, if it is inconvenient to repair away from the watch shop, you can find a piece of iron in the middle of the circle, no magnetization, stand it on the table, slowly wear the watch from the iron circle, the magnetism on the watch will be absorbed by the iron; You can also place the watch on a clean iron plate that is not magnetized, so that the magnetism of the watch will gradually disappear after two days.

liuzixi822102

Degaussing equipment or go to a repair shop to degauss.

A method for determining whether a watch is magnetic.

Compass: Bring the watch close to the compass. If the compass is strongly deflected, the watch is magnetic. Even though the watch is not magnetic, the watch itself is made of steel, so the compass moves slightly as the watch approaches it, but it is deflected very little.

This method can also be used to detect if there is a magnetic field in the place where the watch is stored. Take the compass to the storage place. When the compass is deflected, there is a suspicious magnetic object nearby.

Steel tools in the home, such as vises, are more likely to be close to magnetic objects to receive magnetism unconsciously. Even if you are in the place where your watch is stored, keep it away from this magnetic tool.

A method of demagnetizing a watch with a demagnetizer.

The watch demagnetizer generates an alternating magnetic field from an alternating current power source to degauss the hairspring of a mechanical watch. There is also a degaussing circuit when you turn on the tube TV. You can also place your watch in front of the screen and turn it on to demagnetize.

In addition, there is also a definite degaussing effect. Once the magnetism on the watch will suddenly go very fast, even faster than 1-2 hours. Pay attention to the usual installation of machine watches, away from magnetic fields such as stereos, TVs, mobile phones, etc.

There is no need to worry about the magnetization of the love watch. Start by placing the compass next to the watch and see if the compass has strong fluctuations. If it is, it is magnetized, and on the contrary, it is not magnetized.

Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized to restore it to normal.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

You can find a professional watch repair shop for degaussing repair.

You can find a professional watch repair shop for repair.

1. Pull out the watch handle and let the watch stop.

2. How to deal with the crackage of the watch? Never dial the hands, nor can you quickly adjust the calendar3, the watch is placed flat (preferably with the watch masked facing down), and the watch should be placed flat until it is sent to a watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

Replace it, you can change it after sale, but it's a bit expensive.

Our mechanical watches often have the situation that the time is not accurate, and most people wonder if the mechanical watch is broken. There are many reasons why a mechanical watch can stop at a bad time, such as lack of power, faulty gears, lack of maintenance, or damage to other internal parts. After this situation occurs, it is recommended that you take your watch to the relevant after-sales service center as soon as possible, or consult on my homepage.

It can effectively help you solve the phenomenon that the watch does not go, prescribe the right medicine, and also avoid the trouble caused by your own improper operation. The watch is not winding enough, and the kinetic energy is not enough. In particular, automatic watches require more arm movement, and the winding efficiency is very low.

If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.