Skyworth LCD TV does not need an external antenna,It does not need to be wired,You can receive a TV

In places with strong signals, as long as there is a little bit of indoor antenna, or even a few centimeters of wire, so that it just exposes the high-frequency head and mouth, you can receive a TV signal. However, if there is no antenna at all, the signal will be shielded by the grounding of the jacket of the high-frequency headpiece, and the TV signal will generally not be received. Maybe your TV signal is just aimed at the high-frequency head and mouth of your TV (or after reflection), and you can receive the TV signal.

It's not a built-in antenna, it's the high-frequency head of the TV that has the ability to receive it, and of course it can be received if there is an antenna signal in his receiving range.

Explain that there is a strong wireless TV signal around your TV. Generally, you can receive from your local TV station, and you can only receive 1-2 stations.

It is estimated that all the people received are local stations, and of course they can be received within the range, but wasn't it always the case when there was no cable TV before.

It's up to you to solve this problem, and I guess it's impossible for that to happen.

The TV and set-top box should be connected with an HDMI cable.

After connecting, turn on the TV, first use the remote control of the TV to press the signal source key (signal input) - the screen appears a dialog box - up and down keys - prompt - point to NDMI - OK or OK.

Then open the set-top box, use the remote control of the set-top box, and follow the steps provided to tune, if the input signal of the set-top box is normal, you can watch the program.

The cable brought by the TV is in HDMI format, and this data cable is used to connect the TV to the set-top box.

The specific steps of Skyworth cable TV connection set-top box are as follows:

1. Prepare the set-top box, connecting cable, and Skyworth TV;

2、The different color sockets at the rear of Skyworth TV and the sockets of the set-top box correspond one by one according to the color;

3. Connect it with a connecting wire;

4. Turn on the TV and set-top box;

Of course this is okay.,Unless it's a miscellaneous TV.,I haven't heard of a TV that can't be connected to a cable.。

The specific steps for connecting Skyworth TV and cable TV are as follows:

The materials we need to prepare are:Skyworth TV、Wired antenna、Antenna interface。

1、At the back of the TV, distinguish between F interface and quiet circular threaded interface,Confirm the antenna interface of the TV。

2. Use the screw-in interface to connect the Tianyuan hole cable to the TV and connect it tightly.

3. Use the settings menu of the remote control to set the input signal to cable TV.

4. Make Sen Yunku use the remote control to scan the channel and find the channel within the receiving range.

Skyworth TV is successfully connected to wifi, but I can't watch network TV.

Reasons: 1. Check whether the software is running normally. In the first case, you can't watch film and television resources on the basis of the normal network connection, then it may be a problem with individual software. You can go to the market management section to see if the software needs to be updated.

2、Do one-click group optimization and deep cleaning for TV。 Due to the long use of TV equipment and the lack of regular cleaning of garbage cache, it will cause a small memory space on the device, so that it cannot be normal**related software.

4、If the above three methods still can't ** resources,It is recommended to restore the factory settings of the system to the TV。 Sometimes, the device will not work properly due to an unsuccessful system upgrade or a low version. For details, you can find and click Factory reset in the Settings Bypannai.

options.

Without internet and cable TV, there is no other way but to install satellite pots or receive terrestrial radio waves.

Install a household pass to see **1 unit.