How do you review for a Level 2 Constructor? Which one is better?

About 40% of the time is spent on two public courses.

The knowledge points of the regulations and management subject exams are relatively fixed, and you can cooperate with the relevant courseware and read through the textbooks while listening to the teacher's explanation. Laws and regulations and management are both objective questions, and it is recommended to memorize them once in the study, and do not waste too much time to affect the learning progress if you can't remember them. I went through both the courseware and the book, and it was not difficult to pass these two subjects.

60% of the time to complete practical subjects.

This subject is highly specialized and cannot be just about listening to lectures and reading books. It can be seen from the proposition of the first construction examination in the past two years that the examination questions pay great attention to the combination with the actual situation, which is also the trend of the second-level construction engineer examination. Gone are the days when you can pass the exam by simply endorsing, and candidates must really understand and learn in combination with the ** and ** on the spot.

At the same time, in the process of studying, it is necessary to pay attention to the close connection between various subjects, and the content of public courses will often be examined in practical cases in the past two years, which increases the difficulty of practical examinations. Therefore, we must pay attention to the interconnection and flexible application of knowledge points.

Half a month before the exam, brush up on the past questions.

The first is to understand the overall structure of the test paper, the common test points and the distribution of scores, etc., and the second is to consolidate the knowledge points, key points and difficult points by doing questions, test their learning effect, check and fill in the gaps, and finally find out the unfamiliar points to strengthen the learning and memory of this part.

Students need to plan their study time reasonably, use correct revision methods, study purposefully and planably, and improve their learning efficiency. Although Erjian is more boring to learn, you can try to join the distribution of exam 100 courses, which does not occupy work and study time, zero cost, no need to purchase and ship, and you do not need to deal with pre-sales and after-sales; You only need to click on your mobile phone, and you can get a high reward commission with one click** sharing, and enjoy double income in advance. As long as you are willing to work hard and use the right methods, there is no difficulty in reviewing and preparing for the exam.

I wish all candidates can successfully overcome the exam and win the second-level constructor!

First sort out the important knowledge points, prepare a notebook and a set of mistakes, the set of mistakes is used to record the questions you have done wrong, and the notebook records some details and points that are easy to ignore. You don't have to do difficult questions, the foundation is fundamental, don't focus on one topic in each exam, relax your mind, don't be in a hurry, in short, be confident and believe that you can.

You can use this learning method to study with the following online course resources, so that you won't get tangled.

Study method – the preparation process.

First of all, you should formulate a "study time plan" suitable for yourself according to your own situation, and secondly, focus on the key content.

The entire preparation process should be divided into three phases.

Introductory phase. Advanced Stage.

Verify the effectiveness of the review by doing mock questions. After doing the questions every day, you should summarize them, make notes on the key points of review and the questions you don't understand, and find out your weak points for consolidation and review.

Actual combat stage. In the sprint review stage, you should demand yourself according to the specified time and standards of the exam to find the test status.

Learning Methods - Summarize more and reflect more.

Don't take the question as a task, but dig deep into the knowledge and test points behind the question.

It is better to concentrate on doing a good set of test questions than to concentrate on doing a good set of test questions.

Learning method – answering skills.

When doing multiple-choice questions, it is necessary to reasonably adopt methods such as "direct selection method", "elimination method" and "comparison method". At.

Multiple choice questions and fewer choices will be scored, and wrong choices will not be scored, so do not answer uncertain options.

Subjective questions are the type of questions with the highest score in the test paper, and they are more difficult. Most people think that the more words in the code, the better, whether they are on the side or not, write them first, and let the adjudicator find the answer by himself, which is not advisable and easy to backfire.

It should be particularly emphasized that many candidates start answering questions without even reading the requirements of the questions carefully in order to improve their speed when doing the questions. For example, a multiple-choice question stem requires the "best" answer, and there must be other alternative answers, and it would be a shame to lose points if you didn't see the stem.

pwd=2d72 Extraction code: 2d72 Resource content: analysis of real questions of one construction and two constructions, electronic books required for the new version of the exam, mind maps, mock exam papers, high-quality online courses, overcharge, general charge, pre-exam sprint, courseware, textbooks, brush question bank, all kinds of latest questions, 0 basic classes and other learning resources sharing, including construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy hail and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering, etc.

Constructor II is a professional qualification and is a prerequisite for working as a project manager. Same causeThe National Unified Examination is organized by the State in a unified manner。Since 2009, the second-level constructor has implemented local management and local proposition system.

Registration conditions: Those who abide by the law and discipline, have a secondary college degree or above in engineering or engineering economics and have been engaged in construction management of construction projects for more than 2 years can register for the second-level construction engineer qualification examination.

The examination subjects for Constructor II are:There are 3 subjects: "Construction Management of Construction Projects", "Construction Engineering Regulations and Related Knowledge" and "Professional Engineering Management and Practice".。Among them, the subject of "Professional Engineering Management and Practice" is divided into six professional categories: construction engineering, highway engineering, water conservancy and hydropower engineering, municipal engineering, mining engineering, and mechanical and electrical engineering.

The results of the second-level constructor are valid for two years, and the results management implements a two-year cycle of rolling management methods. That is, you must pass all three subjects within two years to obtain the qualification certificate.

The conditions for the second-level constructor examination, and what are the subjects of the second-level constructor examination.

The second-level construction engineer qualification examination consists of three subjects: "Construction Management of Construction Engineering", "Construction Engineering Regulations and Related Knowledge" and "Professional Engineering Management and Practice". Among them, the subject of "Professional Engineering Management and Practice" is divided into 6 professional categories: construction engineering, highway engineering, water conservancy and hydropower engineering, municipal public works, mining engineering and mechanical and electrical engineering.

Three courses, construction management of construction projects, construction engineering regulations and related knowledge, professional engineering management and practice. There are 6 majors, including construction engineering, mechanical and electrical engineering, municipal public utilities, and highway engineering.

Constructor II needs to take the examination of three courses, namely "Construction Management of Construction Engineering", "Construction Engineering Regulations and Related Knowledge", and "Professional Engineering Management and Practice".

There are three subjects in total. The second-level construction engineer qualification examination is divided into a comprehensive examination and a professional examination, the comprehensive examination includes two subjects: "Construction Engineering Regulations and Related Knowledge" and "Construction Management of Construction Projects", and the professional examination is a subject of "Professional Engineering Management and Practice".

Three subjects, regulations, management, and professional practice.

The second-level construction engineer qualification examination is divided into a comprehensive examination and a professional examination, and the comprehensive examination includes two subjects: "Construction Management of Construction Engineering" and "Construction Engineering Regulations and Related Knowledge", which are the subjects of the unified examination for candidates of various majors.

The professional examination is a subject of "Professional Engineering Management and Practice", which is divided into 6 majors, namely: construction engineering, highway engineering, water conservancy and hydropower engineering, mining engineering, mechanical and electrical engineering and municipal public works. Candidates should choose a major for the examination according to their work needs and their own conditions when registering.

Try to make full use of the knowledge of the Internet, the computer is next to you, and if you need to know what problems cannot be found in the book, you will immediately search for information on the Internet. Terms that have not been mentioned are generally used on the construction site, and it is necessary to understand and memorize.

Review focus: 1. In the first round of review, read the book carefully, complete the exercises as soon as possible after reading a chapter of the book, and make some adjustments to ensure that the knowledge points you see are digested;

2. The second round of revision is very simple, but it is more important than reading a book. It's to look at the questions you have done wrong, understand and memorize them.

3. One or two months before the exam, start to do one or two past year questions, do not require closed books, and open books are very good. But be sure to force yourself to mark the knowledge points that each question is testing and mark the edge of the question.

4. Concentrate on the set of review questions and fill in the gaps.

For most people, the advice is to focus on revision and not to read a little bit a day. It is many times better to read a book in a few days than to read it in bits and pieces for a month and only read the book once.

Course + Question Bank.

For the first time, before watching the exam 100 intensive lectures, first quickly go through the textbooks and handouts, just read a section or at most one chapter, mainly look at the title, simply flip it, just know a rough line, and get it in a few minutes.

The second time, with the textbooks and handouts when watching the fine lecture, follow the teacher to draw the key points when listening to the exam 100**, make notes, and make good use of the pause button when listening, this time you do not require you to remember all the knowledge points, but through the teacher's fine lecture you must know what the key point is, what to memorize later, and what to ignore.

The third time, when you learn the concise lecture of a chapter, stop at this time, flip through the book to review the knowledge points, do the 100 chapters of the exam practice questions, and return to the book when you encounter the questions that you don't know, so that you can digest all the words of the teacher.

For the fourth time, take the exam 100 and do the past questions. If you also encounter a question that you can't flip through the book or handouts, of course, you can also mark this question in the book that year you have taken the test, and you can know what knowledge points are often tested every year, what are your shortcomings, and then improve your own shortcomings.

Doing past past papers will allow you to understand your true level and gap, as well as the difficulty and direction of the past questions, and the earlier and deeper you are exposed to the past papers, the less detours you can take, rather than the headless flies without direction.

Follow the exam 100 intensive lectures and teachers to read the textbooks intensively, clarify their thinking, understand the main content of the textbooks, and master the important and difficult points of the textbooks.

Practice questions, practice questions, practice questions. Find deficiencies by checking and filling in the gaps through exercises, review knowledge points, and then draw inferences!

This is especially true for practical courses. Through the intensive learning of various question types, the learning effect of substituting questions for points can be achieved.

1.Combine textbooks, notes, high-frequency test center compilations and other systems to master the test center.

2.Combined with past past questions, analyze the idea of asking questions, and master the skills of doing questions.

3.Pay attention to the mastery of the main knowledge of each section, such as the "three control, three management and one coordination" of construction management.

Fragmented time memory of high-frequency test points, and targeted training of test centers such as breakthroughs in difficult test points and practice questions. Learn how to do questions (e.g. memorization of core test points, comprehension of practical subjects, calculations, etc.).

1.Do a few sets of real question papers before the exam and experience the real exam scene.

2.Adjust your status, such as stopping socializing, studying every day, etc., to ensure that you are in good shape for the exam.

There are not so many just right in this world, if you want to take the exam and get the certificate, what you need is a professional exam 100 teacher to give you a systematic and planned preparation method, a collection of key points, test center information, a reasonable and suitable course for beginners!

The professional practice of the second-level construction engineer examination is divided into 6 professional categories: construction engineering, highway engineering, water conservancy and hydropower engineering, mining engineering, mechanical and electrical engineering and municipal public works.

1. The difficulty of the exam is judged from the pass rate of the exam.

We can reflect the difficulty of the professional examination through the examination pass rate of candidates in each major of the second construction. The higher the pass rate, the less difficult the professional exam will be.

The difficulty ranking of the second-level constructors in each specialty, from easy to difficult:

Construction, Mechanical and Electrical, Highway, Municipal Administration, Water Conservancy and Hydropower, Mining Engineering, (here through the student through the legal assessment, does not fully represent the true degree of difficulty of the subject).

2. From the perspective of industry demand, measure which major is the best to apply for.

Among them, construction engineering is the most popular, the largest number of people, the most demanding, and the easiest to test, and the number of second-level constructors in construction engineering should be more than all other comprehensive combined. It also depends on what professional aspect you are engaged in, mainly in the industry you are currently engaged in, and you can add projects in the future.

3. Measure which major is the best to apply for from the perspective of the industry market.

At present, the best and most abundant in the market is municipal engineering. Of course, the municipal ones are also the most difficult to examine. Out of 100 people, one or two are good.

The market outlook is not static, it changes with the supply and demand relationship of the market. Maybe next year to invest heavily in mining engineering construction, then next year's mining engineering secondary construction engineer will be more popular.

In short, whether the major is good or not depends on what standard you evaluate, in fact, the most suitable for you is the best. When you choose a major, you should also combine your major and the field you are currently engaged in. The Constructor Exam is still an exam that requires practical experience, and without practical experience in the relevant industry, it will be very difficult to take the exam.

From the analysis of the real questions of the second-level construction engineer qualification examination over the years, the examination questions are basically from the original text of the textbook (the textbook is published by China Building Industry Press), so as long as the candidates carefully study from the first page to the last page of the textbook, it is very easy to pass the second-level construction engineer with a high score. Candidates can only be comfortable in the examination if they are fully prepared, and they must not usually burn incense, cramming on temporary occasions, and taking shortcuts.

Textbooks are the foundation of the exam. Again, it is emphasized that all the questions in the Constructor II exam are from the textbook. Therefore, it is very necessary to be familiar with the textbook. Therefore, candidates must be good at summarizing and systematically grasping the essence of the textbook.

While studying the textbook thoroughly, candidates should also pay attention to the key points for review. Because the importance of knowledge points in different subjects is different. Each course has its own required knowledge points, which will appear in the exam papers every year, but in different forms, which can be said to be inseparable.

For important knowledge points, candidates must have a deep grasp of them, be able to draw inferences from one another, and respond to changes with no change. If candidates want to be more efficient in revision, they must grasp the key points and avoid putting effort on average. Therefore, it is important to study the textbook thoroughly and focus on the textbook.

The Constructor II qualification exam involves a wide range of contents, some of which are rarely touched in actual business, and it is not enough to rely on memorization and self-understanding to prepare for the qualification exam. Proper practice of some high-quality practice questions can improve the candidates' understanding and application of relevant knowledge points, and then improve their test-taking ability. Through practice, candidates can gradually summarize some key points and rules of the test content, find out the weak links in their own learning, and improve them in a targeted manner.

Doing some practice questions and practice questions is an essential part of the success of the exam. Especially in previous years' exam papers, although the possibility of retaking the exam is not very large, it is important to be familiar with the question type.

In the final sprint stage, we must pay attention to the compression of knowledge content, so as to focus on it, improve efficiency, and also help reduce psychological pressure and cope with the exam with a relaxed mental state. If you want to compress the knowledge you have learned, you must carefully study the textbooks in the early stage, and draw out the key problems for key review and memorization.

For more information about the latest secondary constructor exam, please log in to the information column of Zhuwang School Secondary Constructor to find, or pay attention to Zhuwang School's WeChat***, and there are more free trial of second-level constructor quality courses, welcome to enter Zhuwang School's WeChat applet** to learn.