Can a drift board be used as a skateboard, and can a drift board be used as a vertical board for rol

I'll systematize it:

The drift board is not suitable for stepping on the heel of the two wheels in parallel, the benefits are basically not counted, the disadvantage is that it is so easy to break the foot (you just slip on the left and right sides of the ground, or even fall left and right), the lateral balance of the person is very poor, unless you are a master, I have seen two feet in parallel, but also slid a short distance down.

The distance between the two rows of wheels on the skateboard is relatively large, which allows you to spread your feet apart a little more, so that you can adjust your center of gravity to the middle of your legs.

However, you can try gluing two boards parallel to each other to make a super small 4-wheeled skateboard, but you still can't do it if you don't have a good balance between vertical and horizontal.

In short, the wheels are too close together to give you too little range to adjust your center of gravity, making it too difficult for you to control your body. You have to practice.

You can play a little balance or something.

But I don't think there's speed.

Then you have the other foot on the ground.

It's hard to fall.

Because when you find that the center of gravity is unstable.

The other foot assists the center of gravity (natural response).

Because the foot you step on the ground is not controlled

It's the foot that you're stepping on the ground that's controlling the speed and the balance.

This doesn't work, the balance of the human body is between the two feet, and now use one foot to exert force, and the two wheels are one in front of the other, and there is no guarantee of the body's center of gravity, and it will fall very badly, hehe.

Summary. A drift board is a type of sports equipment that is commonly used to perform skateboarding sports. If you want to use the drift board as a pulley, you can use a riser instead of a pulley, but there are a few things to keep in mind:

1.Choose the right riser: The riser needs to have good wear resistance and smoothness to ensure that the drift plate can slide smoothly.

It is recommended to choose a material with moderate hardness, such as PVC board or plastic sheet. 2.Fixed risers:

The riser needs to be fixed in place to ensure that the drift plate can slide steadily. Tools such as clips or glue can be used to hold the riser in place. 3.

Pay attention to safety: When using the drift plate for pulley movement, you need to pay attention to safety to avoid accidents. It is advisable to wear appropriate protective gear such as helmets, knee pads, etc.

A drift board is a type of sports equipment that is commonly used to perform skateboarding sports. If you want to use the drift plate as a pulley, you can use a riser instead of a pulley, but you need to pay attention to the following points:1

Choose the right riser: The riser needs to have good imitation wear resistance and smoothness to ensure that the drift plate can slide smoothly. It is recommended to choose a material with moderate hardness, such as PVC board or plastic sheet.

2.Fixed risers: The risers need to be fixed in place to ensure that the drift plates can slide stably.

Tools such as clips or glue can be used to secure the riser in place. 3.Stay safe:

When using drift plates for pulley movements, it is necessary to pay attention to safety and avoid accidents. It is advisable to wear appropriate protective gear such as helmets, knee pads, etc.

I'm sorry I don't understand, but can you elaborate on that?

A drift board is a type of sports equipment that is commonly used to perform skateboarding sports. If you want to use the drift plate as a pulley, you can use a vertical plate instead of a pulley, but you need to pay attention to the following points:1

Choose the right riser: The riser needs to have good wear resistance and smooth cracking to ensure that the drift plate can move smoothly. It is recommended to choose a material with moderate hardness, such as PVC board or plastic sheet.

2.Fixed risers: The risers need to be fixed in place to ensure that the drift plates can slide stably.

Tools such as clips or glue can be used to hold the riser in place. 3.Stay safe:

When using drift plates for pulley movements, it is necessary to pay attention to safety and avoid accidents. It is advisable to wear appropriate protective gear such as helmets, knee pads, etc. It should be noted that using the drift plate as a pulley may cause some wear and tear to the equipment, so it is recommended to make adequate preparations before use, and pay attention to care and maintenance.

1. Choose a wall that is long enough, because beginners with drift boards must rely on the wall to learn to stand on the drift board in a balanced way. No posture.

2. Distinguish the left and right feet of the drift board, hold on to the wall, and first stand with the left foot on the dry rubber drift board.

3. The distinction between the left and right feet is to stand on the drift board and the surface of the drift board is slightly open in a figure-eight shape, and then step on the right foot on the drift board.

4. Twist the shape of the two feet into the shape of the outer figure-eight, at this time the left foot can slide diagonally down, and on the contrary, the right foot can slide diagonally upward.

5. At a suitable angle, twist the shape of the two feet into the shape of an inner figure-eight, at this time, the left foot slides diagonally upward, and the right foot slides diagonally downward.

6. In this way, the foot shape is changed in a circular way inside and outside the figure-of-eight, and you will stand on the drift board and slide left and right.

Drift boards and skateboards are two different means of transportation, and while they have some similarities, they are also very different.

First of all, the drift board is an emerging means of transportation, which is characterized by the ability to carry out drift movements. The wheels of the drift board are smaller and stiffer than those of the skateboard, so it can drift at high speeds on smooth road surfaces. The body of a drift board is also shorter and narrower than that of a skateboard, which makes it easier for people to drift movements.

The brakes of the drift board are also different from the skateboard, which uses a foot brake for better control of speed and parking.

Secondly, skateboarding is a relatively traditional means of transportation, which is characterized by the ability to perform a variety of fancy movements. The wheels of the skateboard are larger and softer than those of the driftboard, so it can adapt to uneven road surfaces better. The skateboard also has a longer body than the drift board, and the width of the branch is changed to make it easier to perform a variety of fancy moves.

The braking of the skateboard is usually the use of foot brake or friction brake, which is not as simple as the foot brake of the drift plate, but has a wider range of applications.

To sum up, although drift boards and skateboards are both transportation tools, their use scenarios and characteristics are very different. If you like high-speed drifting and extreme sports, then the drift board is a good choice; If you like fancy action and a wider range of applications, then skateboarding is more for you.

Drift boards are not difficult to learn.

Method: 1. Next to the bar or wall, enter the left and the right foot first point the ground, then go up the left foot, and then enter the left foot to point the ground first, and then go up to the right foot. After going up to the Annihilation Faction, you must hold on to the railing or wall.

2. Spread your legs about 30 degrees apart, bend your knees slightly to maintain balance, and then hold on to the railing or wall to provide forward momentum with your hands, as long as your feet are balanced. 3. When the left foot moves backwards, the right foot moves forward, and when the left foot moves forward, the right foot moves backwards.