What should I do if I divide my computer with mobile broadband?

Updated on technology 2024-02-08
26 answers
  1. Anonymous users2024-02-05

    Let's say one of your two computers can already dial up the Internet via GPRS.

    Then you just need to connect the other computer and this one to the switch.

    Then turn on dial-up tethering on the computer that has access to the Internet.

    Just set up the IP and gateway and DNS correctly.

    Note: Open Sharing: Dial-up connection point right-click - Properties - Advanced - Allow other network users...

    The gateway is the IP address of this computer that you can access to the Internet.

    DNS is the DNS of your local mobile internet.

    IP is generally the last bit between 1-254 to lose a random one) Of course, the speed is quite slow...

  2. Anonymous users2024-02-04

    Add a router and you can do it, that's how it is in my house! You can also use a wireless router so that you are not limited by network cables, as long as the distance is not too far.

  3. Anonymous users2024-02-03

    To get a router, the WAN port of the router is connected to the modem, and then both you and his computer are connected to the LAN port of the router. You don't have a lot of computers, just buy a 4-port router. You're upstairs, so you're going to have to pull the line.

    Also, if your modem has the function of a router, then go directly to the LAN port, if not, then you must buy a router and network cable.

  4. Anonymous users2024-02-02

    Connect the network cable out of the broadband cat to the WAN port of the router, connect each computer to the LAN port of the router, the IP address of the computer network card is set to automatically obtain, enter the address bar of a computer browser, specifically to view the network parameters obtained by your computer network card, and log in through the IP address of the gateway) Log in to the router, the general username and password are admin, select the WAN port settings, Set the broadband account and password assigned to you by the operator when you apply for broadband to the PPPOE mode of the router, so that the router can automatically connect and share the Internet.

  5. Anonymous users2024-02-01

    Buy a router, and you can connect the Internet between n computers.

  6. Anonymous users2024-01-31

    1. Use a router (wired or wireless);

    2. Neither computer has wireless. One of them must have two network cards as servers, and then share the network cards of the computers that can be used;

    3. One has wireless, and the other has no wireless. The method is the same as 2;

    4. Both have wireless. This is the best way to get it, and you don't need a router, and you can directly dial up the computer with broadband dial-up after dialing up the Internet, find the wireless network card of this computer in the network settings, and use the function of transmitting signals from the wireless network card, so that another computer with wireless can receive the signal, which is the same as the signal of the wireless route.

    Note: If you don't use a router, only the dial-up computer starts working, and the other computer can access the Internet.

  7. Anonymous users2024-01-30

    The easiest way to do this is direct routing.

  8. Anonymous users2024-01-29

    1. If you have a broadband cable, you can use a router to separate the line and separate a cable to connect to the second computer.

    2. If there is a machine with a wireless network card, you can directly connect to the router to access the Internet.

  9. Anonymous users2024-01-28

    Connect both computers to the router, then connect the WAN port of the router to the cat, dial up with the router, and both computers can be on.

  10. Anonymous users2024-01-27

    Start by buying a router.

    The fiber optic line connects the broadband cat.

    The broadband cat comes out with a network cable to connect to the router WAN port.

    Ports 1, 2, 3, and 4 on the router are connected to the computer.

  11. Anonymous users2024-01-26

    Add a router or a network cable bridge.

  12. Anonymous users2024-01-25

    Connect with a router or with wifi.

  13. Anonymous users2024-01-24

    Static IP routed with TP-link, it's fine. It can be automatically logged in, regardless of whether it is static or adsl dialing. The price does not exceed 100 yuan. It can be shared by four people.

  14. Anonymous users2024-01-23

    The best way is to use a router, any computer has a separate Internet access, you are now using a switch, if you want more than one computer to access the Internet, you must install ** software, there must be a host to always open, other computers can access the Internet, but the setting is more complicated, every computer must be set up, every software that can access the Internet must also be set, it is too troublesome to use. I suggest that it is best to use a router, as long as the account number and password are entered into the router (this job can be entered by the boss when buying a router), and other computers can go straight to the Internet without any settings.

  15. Anonymous users2024-01-22

    Is it wired access? Multiple computers require a switch.

  16. Anonymous users2024-01-21

    Mobile broadband restrictions can only be used for one account and one computer, this situation is impossible, the router can definitely be used at home, it may be that there is a problem with your router settings, but you can also before, suddenly it doesn't work, is it poisoned or what, you kill the virus first, don't turn off the power and restart the router, and set it again! It should be able to be solved!

  17. Anonymous users2024-01-20

    If your mobile company is blocking your router from sharing the Internet, you can set the MAC address of your router, desktop, and laptop to the same.

    The 815 error is a line or server problem, look at your description should be an error when you make broadband dial-up, this is wrong, the Internet computer does not need to dial up, the broadband dial-up account and password should be set up on the router, let the router dial-up, the computer find the LAN port and directly access the Internet.

  18. Anonymous users2024-01-19

    Is your MAC address cloned right?

    It should be that you don't use the router to directly connect the network cable to the computer to dial up the Internet, and the system will automatically clone the MAC address to the computer network card, and then connect the router and clone the MAC address of the network card to the router.

  19. Anonymous users2024-01-18

    Telecom got a ghost,I've played ** consulted,Telecom said that the network cable of each family can only be used by one computer,If there are more than 2 computers, he will automatically detect it,Only one IP is allowed to access the Internet,I was like this at home during the summer vacation,Depressed to death,But recently I can 2 too computer Internet access,I don't know what the problem is,Is it not detected me?

  20. Anonymous users2024-01-17

    Yes, mine too, two are not allowed to go up together now.

  21. Anonymous users2024-01-16

    Plus a route will do the trick.

  22. Anonymous users2024-01-15

    You go to graduate school, and you will know after graduate school.

  23. Anonymous users2024-01-14

    No, it's better not to use mobile bandwidth, because the quality of mobile bandwidth is not very good.

  24. Anonymous users2024-01-13

    Possibly, it's better to use wireless Internet access. Apply for an account and don't use it at the same time. You can also use a 3G SIM card to access the Internet.

  25. Anonymous users2024-01-12

    Wouldn't it be nice to use a router?

  26. Anonymous users2024-01-11

    Select Connect to in the menu.

    Then select Set Up Connection or Network.

    Click Set up a wireless temporary (computer-to-computer) network.

    Select Next.

    Just give me a network name.

    The type is WPA2- individual.

    Then enter your password.

    Then choose the next step.

    Hope it helps

    I don't understand

Related questions