Will I be line slicing the whole process with a company that needs this?

Use Photoshop auxiliary lines to make PS slices.

For many product detail pages or web pages that are too large to load too slowly, share a tutorial on how to make PS slices using Photoshop auxiliary lines.

Method steps.

2.Select the Slice tool on the toolbar and click Guideline-Based Slice Slice Generated above.

4.Once selected, press and hold the Shift keyboard on your keyboard, then select Slice 1 and let go of the Shift key.

6.Then click File and select Save in web and device format

7.The [Save as Format for Web and Device] dialog box pops up Select **Format and Quality For the details page, it is recommended to use JPEG format Quality 80

8.Click [Save] Name the file name Click [Save] Here I save to the desktop.

9.The system will automatically generate the slice in the images folder, and when you open the folder, you can see the slice we just saved.

You're talking about slices, right? Chetu has not heard of it. Slicing is to generate web pages, that is, to cut the graphics of your page into small pieces of small ** to facilitate web browsing.

The official name of the guide you are talking about is "guide". The purpose of a reference line is to determine the coordinates of a text or image to ensure that the position is accurate. The easiest way to create a new guide is to pull it out directly with the cursor.

To display the ruler, place the cursor on the left or upper edge of the ruler, and when the cursor becomes a white arrow, pull it right or down, and it will come out, and you can pull it as many times as you want. Just pull it to the predetermined place and stop. If you click "Align" to match, it will be easier to locate accurately.

Guides do not affect the result of saving the image, i.e. they are not embedded in the image. Guides can be cleared when they run out. If you don't clear it, the saved image will still have the guides the next time you open it.

The steps to solve the white line are as follows:2.Once the slicing tool is selected, proceed to slice each piece, as shown in the image below, and select the slice into four pieces.

3.After cutting the slices, save them: select [File] - [Save in web format], as shown in the following figure:

4.Then select each trim one by one and change it to jpg format, as shown in the figure below

5.Once all the slices have been modified, you can select [Save] to finish.

6.That way you will find a folder with "amages" in the saved location, and then open it to see the slice stored as jpg. Cut into gifs, jpgOr png. So that the white line problem can be solved.

I can't see the map.,Generally, there won't be any ghosts or anything like that.,It should be that there's no connection between your slices and slices.,There's an extra one.。

See if there are any extra anchor points in the screen that have not been deleted, but this kind of problem mostly appears in AI, and PS is rare.

This is generally a matter of slicing, why should it be cut into gif, jpgOr isn't png great.

This white line can be said to have little to do with cutting out.

Just insert style= in the middle of each sheet"display:block"That's it; If there are more **, you can use dw to modify it in batches, ctrl+f to find".

Are you talking about separators?

I also come across this a lot.

When slicing, it is best to pull the auxiliary line first, and there should be no gap between the lines, and the white line will not appear.

This gif is a separator and is used to divide each **.

I enlarged the cut, but I didn't cut it accurately when I cut it.

Slice based on the reference line must be selected after the slicing tool can be used, if the clear height of the picture is more than the shed, such as the large based on the reference line slice button will also become friend and the front gray is not available.

1. You have to move the knife to the intersection of the tangent and the tangent, and you can only cut when the cursor of the knife has not changed. (Pay attention to the change of the knife, the cutter, move the tangent, and move the slice will be different).

2. If you want to cut a small picture that is not complicated, right-click under the slices of the large picture, and select "Divide the slices" to set the number and size of horizontal and vertical slices, so that the computer can automatically cut them for you.

It is recommended to go to the preferences that can be set.

menu View Clear Slices.

Splitting can be done using different modes of shape merging.

The steps are as follows:1Open the software, create a new blank screen, and draw a circle.

2.Use the Rectangle tool or pen to draw the area you want to separate.

3.Duplicate the circle layer.

4.Select the bottom layer and the second rectangular layer, and find the layer - Merge Shapes - Unify the overlap shapes.

5.After the operation is successful, half of the shapes are obtained, and the remaining two layers are operated with the same operation, and finally two separate shapes are obtained.

P.S. has added the Artboard tool (which is in the same way as the Move tool, similar to an AI artboard), when you create a new artboard, the color of the guide you pull out is the light blue set in the picture. If you don't have an artboard, the color of the guides on the canvas is cyan.

The guides are pulled from the ruler on your own initiative. Smart guides can be said to be a passive skill, after turning on smart guides, when you move the layer, the relationship between the current layer and other layers (or canvas) will be displayed, for example, when you move the layer, this layer is aligned with the top of other layers, and the smart guide will be displayed, so that you know that the top of the two layers is aligned. At the same time, it can also display the distance information of the two layers, which is very convenient when designing, and there is no need to manually align the layers.

There are two ways to delete the slice line after 3DMax wall slicing, one is to press Ctrl+Z to retreat, and the other is to select all the points on the sliced line, and use the remove command to remove them, the points are gone, and the line is gone.

Select the slice line and remove (not delete), then select the vertices resulting from the slice line and remove (not delete).

Select the line you want to delete, press Ctrl+Backspace (delete key to the right of the + sign), or press Ctrl+Right-click to delete the point and line together if there is a Remove in the list.