How to install ISO system files

One of the easiest ways is to extract the ISO and run the installer, which is how some computers can install the system. You try.

Hehe, his own chin, slowly returned.

Engrave it on CD.

The following describes how to install the ISO image file:Computer: Lenovo computer Tianyi 510s.

System: Windows 7.

Software: Daemon Tools

1. Double-click the DAEMON Tools Lite icon on the desktop to open the virtual drive software. Once the virtual drive is turned on, select the Quick Load button.

2. Open the window and select the ISO file you want to load.

3. An icon will appear below to display the loaded ISO file.

4. Click the icon with the ISO file to open the installation interface.

5. Click Install in the interface, and you can use the ISO installer.

You can use the ISO system image file to install the system directly.

The installation file can directly install the system; If you don't have a file, you can't install the system in this way; However, there are usually files in the ISO image file.

1. Left-click orange Xiaozi double-click: the file can install the system, in the process of installing the system, pay attention to the prompts in the installation, and operate according to the prompts.

2. The disadvantage of this installation method is that after the system installation is completed, there is a Windows (old) file left on the C: disk (system disk), which occupies a lot of space on the C: disk and needs to be manually deleted.

It's like many people don't know how to install the system themselves, they spend money to find someone else to install the system, in fact, we just need to go to the Internet**. ISO format system files, you can install them for free, so how to install the system with ISO files? ISO file is a kind of compressed file, which can be decompressed and installed, or installed through a USB flash drive, and the following will teach you the detailed steps of how to install the system with ISO file.

How to install the win10 original system ISO image.

How to install win7 original system image.

When installing the system, it prompts you that you have not specified the ghost32 ghost64 location.

Installation Preparation:

2. Decompression tool: winrar or good press, etc.

3. If the current system can be started normally, directly unzip and install, if the system cannot be started, it needs to be installed through the U disk.

4. If you want to unzip and install, the current 32-bit system is a 32-bit ISO file, generally with x86, if the current is a 64-bit system, it is a 64-bit ISO file, generally with X64, 32-bit 64-bit or 64-bit 32-bit, which needs to be installed with the help of a U disk.

5. Remember to back up the files on the C drive and desktop before installing the system.

Method 1: How to install a USB flash drive

How to install ISO files under PE.

Method 2: Extract and install the ISO file

1. Use WinRAR to decompress ISO to a partition other than the C drive, such as to the F drive;

3. Double-click "Install System". exe" to open OneKeyGhost, the default selection is "Restore Partition", and the image path is. gho, and then select the installation location, usually C disk, or select according to the size, click OK;

4. Some users will prompt "ghost32 ghost64 location is not specified", at this time, Pi Zhao clicks "ghost32" or "ghost64";

5. Select or click Open in the ghost directory under Pesoft;

6. At this time, ghost32 or ghost64 will be ticked, and click OK after selection;

7. A prompt box pops up, reminding that the C drive data will be deleted and the restore will be performed, click Yes, if there is an "option to repair the boot", also check it;

8. Reboot into this interface, execute the decompression process of the system, and wait for execution;

9. After the decompression is completed, it will automatically restart, and Burning Oak will enter this interface at this time to execute the component installation and system configuration process;

10. Finally, start into a new system interface and complete the ISO file installation system process.

The above is the whole process of how to install the system with ISO files, and friends who don't know how to install the system with ISO files can learn the above methods.

The ISO system is a kind of ISO format compressed package, it can be decompressed and then executed the installer inside, if you don't want to decompress, we can take the following methods to install the ISO system.

01 We use the U disk boot disk to enter the PE system, and we will see an installation tool on the desktop.

03 Then select the C drive in the drive below, and then click "OK" below.

04 Then follow the prompts to format the C drive and copy the installation file, and restart the computer after copying and start installing the system.

In the early days, the system was installed through the system disk, and now there are many ways to install the computer system, such as the computer system ISO file, local decompression and installation, or it can be made into a boot U disk installation, I believe that many people still do not know how to install the computer system ISO, and the following will share with you the installation method of the computer system ISO file.

Win7iso unzip installation tutorial.

Chinese cabbage installation original digging bird version win7 tutorial。

Win10ISO direct unzip installation steps.

1. Tools required

G left and right U disk: Chinese cabbage U disk making tutorial.

3. Boot settings: How to set boot from the USB flash drive.

4. Partition tutorial: Chinese cabbage U disk system partition tutorial.

2. The ISO installation steps of the computer system are as follows

1. Copy the ISO file of the computer system directly to the GHO directory of the Chinese cabbage U disk;

2. Insert a USB flash drive into the computer, press F12, F11, ESC and other shortcut keys to open the boot menu after restarting, and select the USB flash drive option Enter;

3. Select Enter in the Chinese cabbage U disk list to start the PE system;

4. Double-click to open [Chinese cabbage one-click installation], select the ISO image of the computer system, automatically extract the GHO file, click the drop-down box, and select the GHO file;

5. Then select the system installation location, usually C drive, or select according to the "volume label slag" or disk size, and click OK;

6. A prompt box pops up, check "Restart after completion", and click Yes;

7. Go to this interface and perform the operation of system decompression;

8. After the operation is completed, the computer will automatically restart, at this time, pull out the USB flash drive, enter this interface, and start to install the computer system;

9. Finally, boot into the new system desktop, and the computer system ISO will be installed.

The above is the computer system ISO installation method, if you don't know how to install the computer system ISO, you can refer to the above tutorial to operate.