How to share two computers with network cables, and how to set them up! Thank you! 10

Use a network cable to use a crossover line, and a computer IP is set to:

Another one. If there is no crossover line, use 2 forward network cables, intermediate switches, routers, and hubs, and the IP will be automatically picked.

After connecting, check the workgroup computer on the network neighbor, if it is the default, you can find it, if it is not the default, go up, change the workgroup, look for it.

The simplest is to connect directly with a network cable, set an IP address for each of the two computers, test the address with the ping command, and connect successfully by accepting the data.

What you are talking about is to build a local network, such as sqk000 said the first half of the line, is the host, is the extension.

Make a crossover cable, and connect each to the network card.

The question is not clear and I don't want to say it.

Make a diagonalIt's on the go before making the settings.

Know the detailed settings. **Divide.

The 2 computers are directly connected with a network cable and then shared on the LAN.

Well, first two days the computer is connected to a network. Make a four-port router Moden link to the WAN port of the router, and then connect the two computers to the other ports of the router, the router sets up the gateway, dials, and so on, so that a LAN is formed, and then the ,.. is set on the two computersOne by one, right-click on the online neighbor ,..

Then on the left, >>Set up a home or small office network", fill in the wizard and fill in the name of a group. Remember the name, another computer is about ,..It's just that the computer name settings are different.

And then you have to fill in the name of that group the same, and then you can share it.

Can you make a network cable, one end is RJ45A and the other end is RJ45B, and you can share it.

It is estimated that your two laptops are configured and should be able to surf the Internet normally, then:

1.Put the files you want to transfer into a folder, then set the folder to shared (right-click on the folder -- > select Share & Security--- select Share this folder ---click OK).

2.Then click Start --- Run--- enter cmd and press enter --> enter ipconfig and press enter, take a pen and record the IP address of the machine (for example, 3On another machine, click Start --- Run--- enter the IP address you just recorded.

If everything is fine, you should be able to see the shared folder.

Use a normal network cable, i.e., a straight-through cable. The steps are as follows:

The computer manually sets the IP address as: The subnet mask is: The default gateway is:

The computer manually sets the IP address as: The subnet mask is: The default gateway is:

When we want to access the "ABC" folder on computer A, computer A settings:

Find and select the "ABC" folder, right-click, select "Properties", select the "Sharing" tab, and tick "Advanced Sharing".

Add a trusted username in Permissions. And in the "Net Sharing Center", turn off the option for access password login.

Enable the guest account.

Access method: Use the keyboard combination win+r (the win key is the key of the Microsoft icon) to enter the backslash + the other party's IP in the pop-up dialog box, such as: Click OK or press "Enter" on the keyboard

Your laptop comes with an infrared receiver or Bluetooth module, or a wireless network card.

If you use a network cable to connect directly, you need to use a crossover jumper, which should be specially made in the store;

It's best to find a home switch and connect two computers, but this requires two network cables;

If your networking conditions are really insufficient, you should use a USB flash drive or mobile hard disk as a carrier transmission.

I directly connected the two machines together with the Internet cable,And then use the Feiqiu LAN tool to realize the file transfer,The speed has reached 30m per second,Hehe,I'm still installing computers for my classmates.,All the games he wants are transmitted like this.。 You can also use wireless, the speed is more than 500kb per second, you can also use Bluetooth, I didn't see the speed, but it's definitely slower than wireless.

Two computers have to use the cross method to connect the network cables, one end, green, orange white, blue, blue and white, orange, brown white, brown label, and the other end, orange white, orange, green white, blue, blue and white, green, brown white, brown. If you use the ordinary parallel method, it will not work.

Plug the network cable into the laptop network card interface, then set up disk sharing, turn on the network neighbor, and then set up. It's not difficult, it's easy to get.

I'm not talented, end.

Zhengzhou Aijia Computer Repair Base Tel: 0371--65329451

Use crossed lines. That is, one end is 568a, and the other end is 568b

The network cable must be redone, crossed 2-3, 4-6, connected.