The computer is always blurred, what is the matter with the computer all the time?

You try to change the monitor first, if the problem is still only from the new installation of the graphics card driver, if it still doesn't work, you can change the graphics card to try!

It's definitely a problem with both the display and the graphics card.

You can use the elimination method and try it out.

1.You can borrow a monitor to try it out, if it's normal, it should be a problem with the graphics card.

2.See if the graphics card is integrated or discrete. If it is integrated, you can consider adding a graphics card, but only if there is a graphics card slot.

If it's independent, then change another piece.

It's a problem with the heat dissipation of the graphics card.

2.See if the fan of the graphics card is broken.

3.The display frequency is magnetized.

Get a new graphics card There is a possibility that the graphics card is aging.

85% of the time is due to the heat dissipation of the graphics card.

See if the fan of the graphics card is broken.

1. Graphics card problem, change the graphics card.

2There is a problem with the display, and so is mine, but mine is a red line, and this does not affect the use.

Possibly, it is. It's best to take the graphics card to the computer repair department to have it checked.

I've also encountered it.,I'll shake the capacitor of the CPU on the motherboard with my fingers.,It's generally fine.,What's wrong with it.,I don't know.,I've also reinstalled the graphics card driver.,It's useless.,I'm an integrated graphics card.

I've had the same issue as you before, my graphics card is a gf600. The screen is followed by a crash. Later, I removed the graphics card and saw that the fan was broken, and in the end I had to spend 40 yuan to buy a second-hand graphics card, and now nothing has happened.

After entering the system, the desktop is displayed, and the screen color is not displayed properly.

Cause Analysis]:

Abnormal screen color display may be caused by graphics card drivers, monitors, etc.

Easy Steps]:

Set [Color Quality] - [Highest (32-bit)] - 360 Security Guard] - [Driver Master] - Reinstall [Graphics Card Driver] - [BIOS Settings] Check - Overhaul [Monitor].

Solution]:

Set the color quality.

1.First, right-click on an empty space on the desktop and select Properties.

2.Bring up the display [Properties] - [Settings], check the [Color Quality] option, normally there should be [Highest (32 bits)], Medium (16 bits)], if the color setting is lower than [16 bits], the color display is not normal, set to [Maximum 32 bits] to confirm.

Take it apart to see if the thread is loose. Eliminate the wire problem and go to the maintenance master.

Let's find the nearest master to check it out.