There is an abnormality in the boot of the computer! The computer keeps showing this, how to solve i

I deduce it's basically related to your new memory...

As for the reasons, there may be:

1. Multiple memory modules, and each memory module is not a brand, or not a size... That creates compatibility issues ... Affect the stability of the system. Of course, it will also cause the phenomenon of not being able to start.

2. The problem of the memory module slot may be that you accidentally broke the slot, resulting in poor contact. Therefore, the computer may not alarm, the alarm situation is that the memory is completely undetectable, and the general contact may not alarm.

3. The memory module is not compatible with other hardware, which is relatively rare.

If it doesn't start normally, I analyze that there may be the following aspects.

1.Problems with memory modules.

a.Can be replugged and unplugged.

b.It can also be removed after erasing the chip with an eraser to restore it.

c.If you have multiple pieces of memory, you can use one of them temporarily.

2.Graphics card issues.

a.The graphics card is loose, take it out and plug it back in.

b.Whether the graphics card cable is loose, take it out and plug it back in.

3.Compatibility issues.

You can remove devices from other PCI slots, such as network cards.

4.Power issues.

Although you can have an electrical input, it is not ruled out that there is a problem with the power supply.

5.Miscellaneous questions.

For example, the motherboard contact point is short-circuited, the P4 power port is not plugged in, dust, etc.

I only had this problem a few days ago.,It's very simple.,Unplug the graphics card.,Clean up the metal contact point and it's OK.,If you're not in a hurry to use it, it's best to ask a professional to clean the whole computer.,It's easy to form a microcircuit or something if it's too dirty.,Anyway, it should be OK to clean it up.。

Let's do it yourself!! Believe in yourself!! You can!!!

It is likely to have something to do with the memory you bought, there are various memory failures, not only make a dripping sound, you can try to enter the BIOS to adjust the memory to the corresponding safe range!

The computer keeps showing this, how to solve it, ask the great god for support!!

1.Restart the computer: Restart the computer normally in the current situation, or press the host restart button to restart the computer, or press and hold the lock screen button to force shutdown and reboot again, if there will be no more errors and everything can be entered into the system operation normally, indicating that the previous abnormality is only from time to time the application or system operation error, inconsequential remorse.

2.Patch the system: If you still can't enter the system normally, then press F8 immediately after booting to see if you enter the security center or the last time equipped with the appropriate way, if you can, the system will automatically repair the registry after entering, and recall what operations were done when the first time period of abnormal situations occurred, and according to the suspicion that a certain system software (or driver software) caused the problem to cause the gods, uninstall it, and then withdraw everything normally, and then restart it should be able to enter all normal ways.

3.Reinstall the system: After the CD is successfully launched, it will indicate the function menu bar, then select the menu bar in the menu bar "Install the system to the first partition of the computer hard disk", press the tour to remind the operator after the enter key is clear, or after entering the PE system, operate the desktop "one-click installation system", the computer will start the ghost mobile phone software to automatically load the GHO file and copy and install it to the C area, the whole process is basically not manually controlled, until it finally enters the system desktop.

Your computer is suddenly this problem, it may be an abnormal power failure caused by the system boot boot boot damage, the easiest way, press F8 immediately after booting, there will be an option to enter the safe mode, you press the arrow keys to move the option, check the restore the last correct configuration, it should be OK, if it doesn't work, you can only redo the system.

Meaning: Reboot and select the correct boot device or plug it in to boot**Select Boot. And if the hard disk is successfully detected, it can enter the system. Reasons for hard drive detection failures:

A: The motherboard BIOS is out of power, or the BIOS settings are wrong, and you can't remember the hard disk information, if your system date is incorrect, it is likely to be the reason. Workaround:

Replace the BIOS battery and re-enter the BIOS to test the hard drive. Open the case, remove the shiny battery on the motherboard, and then try to install it after a few minutes, unplugging the case power cord first.

B: SATA cable is not of good quality or is not well plugged in. Workaround:

Change the SATA cable or insert the SATA cable into another SATA slot on the motherboard, do not connect the hard disk cable with other IDE devices, such as optical drives, separate the two cables, and set the master and slave disks correctly.

C: The hard disk is faulty and may need to be replaced.

D: There is a problem with the boot sector of the hard disk. You can check in the BIOS first, whether you can find the hard disk in the BIOS, if you can't find the hard disk in the BIOS, which may be the hard disk is broken.

If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

This should be the appearance of no system installed, if the system is installed, it may be caused by the default system disk is not recognized. To solve the problem, you need to enter the PE, repartition it, and then install the system on the default system disk.

The English prompt indicates that there is no device that can be booted, and it is more likely that the hard disk is not detected, or the system is faulty.

It is recommended to open the chassis and check whether the hard disk data cable and power cable are plugged in.

If there is no problem, press F2 or Del when booting up, enter the BIOS to check the boot settings, whether the hard disk is detected, and whether the hard disk is set as the first boot device.

If there is no problem, the system is damaged, and it can be restored to normal by reinstalling the system.

This should be caused by a problem with the system, however, it is recommended that you scan the hard disk for bad sectors before reinstalling the system, if there are bad sectors, then you can reinstall the system directly, if there are bad sectors, then you need to replace the hard disk.

In this case, it is also necessary to see if the boot order has changed, you can adjust the boot order or fix the boot.

There is no boot or the hard drive is hanging. Go into the BIOS and see if you can recognize the hard drive.

It says that there is no device that can boot because your computer is HP (HP) and should need to reinstall the system.

1. The system boot is lost;

2. Solution, rebuild the boot, how to establish, use the PE system, reboot, re-MBR, you won't find cabbage or something else;

3. Reinstall the system, how to install it, install it yourself or find a professional one. 30-50rmb

There's a problem with the win system, or there's a problem with the hard drive.

It is recommended to reinstall the operating system.

This is the system inside the hard drive. If there is a problem, it may also be a damaged hard disk, or it may be a system damage inside the hard disk. Well, it's basically possible to reinstall the system.

In your case, there is something wrong with the system, and you can solve it by making a new system yourself.

Computer problems, you know, it will be better to smash it directly.

This should be a problem with the system, just reinstall the system.