What should I pay attention to when printing the admission ticket for the fire engineer exam?

2019 Class 1 Fire Engineer Admission Ticket Printing Notes.

1.When visiting the Personnel Examination Network to print the admission ticket, please be sure to use a browser or higher, and adjust the monitor resolution pixels to 1024x768 to ensure the normal display of the program.

2.Whether the name, **, admission ticket number, and test address are correct, and the name can enter up to five Chinese characters, and cannot enter non-Chinese characters.

3.The ID number is a 15-digit or 18-digit resident ID number, and only half-width numbers (e.g. 1234567890) can be entered, but not full-width digits (e.g. 1234567890).

4.If you're someone who has successfully submitted your registration information but can't log in, there are a few ways to resolve your issue:

1) Use 15-bit or 18-bit access to try if you can log in.

2) Candidates who have forgotten the registration serial number, please click [Find the Serial Number of the Admission Ticket] at the bottom of the inquiry page on the printing page of the admission ticket to find it.

5.Whether the name, **, admission ticket number, and exam address are displayed correctly.

6.Whether the application category and the time of the test subject correspond.

7.Before printing for the first time, please close the blocking plug-in software such as Internet Assistant, and then install the printing plug-in according to the prompts before you can print normally.

8.If the browser prompts that the print control is not installed, if modifying the Internet security level is invalid, then print!

9.The printing of the first-class fire engineer admission ticket is generally required to be printed on A4 paper.

10.When printing the admission ticket for the first-class fire engineer examination, the military personnel in the service unit need to enter the application number of the military ID card or passport before printing.

11.Pay attention to the consultation ** at the bottom of the print entrance, write it down, if there is anything you don't understand or can't solve, you should contact the service staff of the test center in time. So as not to delay the exam!

First, to print within the specified time, second, understand the printing steps, third, need to pay attention to the following matters before printing.

1. Use Internet Explorer and above.

2. Close the [pop-up blocker] in the [tool] of IE browser, otherwise it may cause problems such as incomplete display of information on the printed page.

3. Adjust the security level of Internet Explorer. Here's how:

Click Internet Explorer [Tools] - [Internet Options] - [Security] - [Custom Level].

Change all the status in the [Active Controls and Plug-ins] option in the [Security Settings] column to [Enable].

4. Please clear the header and footer from the "Page Settings" before printing

Click "Page Settings" in the "File" menu of the IE window.

In the page setup dialog box that pops up, clear the content in the header and footer, and then click the "OK" button.

Fire Engineer Admission Ticket Printing Process.

1. The printing time of the admission ticket for fire engineers is generally about a week before the exam, and this year it will be printed on November 1, but it should be noted that the printing time of the admission ticket in each province is different, so candidates need to understand the printing time requirements of the admission ticket of the province where they are registered, and print the admission ticket within the specified time.

2. The following table is a summary of the printing time of the admission ticket for each province.

3. The admission ticket is printed on the loginChinese Personnel Examination NetworkPrint the admission ticket.

You should choose to print the admission ticket column on the page of the Chinese Personnel Examination Network, or you can copy it and then print it.

You can print it on the Chinese personnel exam website, which is the one you registered for**.

Step 3: Click on the upper right corner to consult and complain, and make the consultation public.

Step 4: Click on the registration progress on the left.

Step 5: Print the registration form and admission ticket.

After successful registration, the recruitment target can check the recruitment progress of the applicant at any time. Those who have passed the qualification examination can print the admission ticket. After the provincial administrator announces the results of the provincial assessment, the recruits can view their own assessment results.

After the provincial administrator publicizes the list of personnel to be hired in the province, the recruits can view their total results. After the provincial administrator officially hires the applicant, the recruiter can see whether he or she has been hired.

The first-level fire engineer admission ticket needs to log in to the Chinese personnel examination network within the specified time to print, if it does not reach the specified time, the registration and calling examination card printing system will not be opened, and the state disturbance will generally start printing about a week before the exam, and some areas may open the admission ticket printing chain channel about a month before the exam, and the specific time is subject to the notice. The printing process of the first-class fire engineer admission ticket is as follows.

The process of printing the admission ticket for the first-class registered fire engineer examination

The first step is to log in to the Chinese Personnel Examination website and select the admission ticket to print.

The second step is to select "Fire Engineer I (click to select)".

Step 3: Read the pre-test instructions and click "Read Continue".

Step 4: On the pop-up page, select the province and city of registration, the type of certificate, fill in the certificate number, name, and verification code, and confirm.

Step 5: Check the information and print.

Precautions for printing the admission ticket

1) Whether the name, **, admission ticket number, and test address are displayed correctly;

2) Whether the application category and the time of the test subject correspond;

3) When filling in the printing information of the first-class fire engineer admission ticket in some provinces and cities, it is necessary to pay attention to the input method of the certificate number, and some will require the certificate number not to enter full-width characters;

4) The printing of the admission ticket for the first-class fire engineer is generally required to be printed on A4 paper.

Get free learning materials and knowledge maps for registered fire engineers.

The first-class fire engineer admission ticket needs to be printed by yourself, the examination room does not issue the admission ticket, the admission ticket is the candidate's voucher for the examination, and the candidates who apply for the first-level fire engineer do not bring the admission ticket during the examination, they are not allowed to enter the examination room. In addition to the admission ticket, you also need an ID card or social security card.

Candidates must use a browser or higher version when visiting the Chinese Personnel Examination Chain IoT to print the admission ticket, and adjust the monitor resolution pixels to 1024x768 to ensure the normal display of the printing process. When printing the admission ticket, you must carefully check whether the name, **, admission ticket number, test address, etc. are displayed correctly, and whether the application category and the time of the test subject correspond.

The printing of the admission ticket for first-class fire engineers is generally required to be printed on A4 paper, and there is no restriction on the printing color of the admission ticket, as long as the information is clear and correct, and there is no limit on the number of times the admission ticket is printed within the printing time limit. Candidates can also pay attention to the consultation at the bottom of the printing entrance**, and contact the service staff of the test center in time in case of special circumstances to avoid delaying the test.

Get free learning materials and knowledge maps for registered fire engineers.