What are the contents of the fire engineer exam, what subjects are there, and when is the exam time?

There are three subjects in the Registered Fire Engineer Examination, including Fire Safety Technical Practice, Comprehensive Ability, and Case Analysis, and the examination time is on the second Saturday and Sunday of November every year.

A full score of 120 points in each subject, and a passing score of 72 points is sufficient.

In August and September of each year, the examination notice will be issued on the personnel examination network in various places.

Hello, glad to answer for you :

Exam subjects: 1, hello, registered fire engineer has a total of three subjects, and the results of the three subjects are valid for three years, which means that you can pass the three exams within three years. The three exams are "Fire Safety Technical Practice", "Fire Safety Case Analysis", and "Comprehensive Ability of Fire Safety and Safety Technology".

2. The examination questions of "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Protection Technology" are objective questions. Multiple choice questions require you to choose the most appropriate option from the alternatives as your answer. In each question of the "multiple-choice question", there are two or more options that match the meaning of the question, and no points will be awarded for the wrong choice;Missed selection, each selected topic is scored.

In the total number of multiple-choice questions, there are 80 multiple-choice questions, each of which is worth 1 point;20 multiple-choice questions, each worth 2 points.

3. The 15-year question type of the "Fire Safety Case Analysis" subject exam is 6 subjective questions, and the subjective questions are comprehensive case analysis questionsAfter 16 years, the question type is 2 multiple-choice questions + 4 subjective questions, and the subjective questions are comprehensive case analysis questions. The total marks of the three subject papers are 120 points. A minimum score of 72 (inclusive) is required for each subject.

4. The examination results shall be subject to a rolling management method for a cycle of 3 years, and only those who can obtain the qualification certificate of a registered fire engineer can be obtained by taking the examination of the subjects in 3 consecutive examination years and passing the examination. On August 24, 2015, the Fire Bureau of the Ministry of Public Security issued Document No. 233 of 2015 for the examination of registered fire engineers in the middle of November in the second half of each year.

Examination time: 1. Registration: The registration time is generally between August and September every year, during this period, the state will make an announcement, and then the provinces will also issue their own announcements, which will announce the specific registration time, audit location, registration channels and fees and other information.

Pay attention to the "Chinese Personnel Examination Network" and the "Personnel Examination Network" of each province and the "Official Website of Human Resources and Social Security Bureau" of each province, and announcements will be made on it.

3. Examination: The examination time is the second Saturday and Sunday of November every year, and this year (19) is November 9 and 10.

Hope mine can help you.

The subjects and times of the fire engineer certificate examination are as follows:

The exam for Fire Engineer I will be held in November. There are three examination subjects in the first-level fire engineer examination, namely "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis".

November 6, 2021, 09:00 a.m. to 11:30 a.m. "Fire Safety Technical Practice": Multiple choice questions: 80 questions of 1 point each; Multiple choice questions: 20 questions of 2 points each.

From 14:00 to 16:30 in the afternoon, "Comprehensive Ability of Fire Safety Technology": Multiple choice questions: 80 questions and 1 point each; Multiple choice questions: 20 questions of 2 points each.

November 7, 2021, 09:00 a.m. to 12:00 a.m. "Fire Safety Case Analysis": 6 case questions.

"Fire Safety Technical Practice" mainly focuses on the basic concepts, basic principles, classification composition, fire extinguishing mechanism, selection and application and related design requirements, and is the most basic entry-level course for the fire engineer examination.

"Comprehensive Ability of Fire Safety Technology" is mainly aimed at fire prevention inspection, construction and acceptance of fire protection facilities, fire detection, fault analysis, maintenance and fire safety management. It is an extension of technical practice, mainly to explain the practical experience of inspection, commissioning, acceptance and so on.

Fire Safety Case Analysis" is the integration and application of the first two subjects, biased application, split this subject is often the most headache for many candidates, the questions are more flexible, the amount of information is large, should be to review the first two subjects, lay a good foundation, in the review of this subject.

There are three subjects for registered fire engineers, namely "Fire Safety Technical Practice", "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis", with a full score of 120 points, and each subject is qualified with a score of 72 or more.

1. The subject of "Fire Safety Technology Practice" is the most basic, so the difficulty of the examination is not high compared to the other two subjects, and the content mainly includes combustion foundation, building fire prevention, fire protection facilities, fire prevention of other buildings, and fire safety assessment. It mainly focuses on the most basic content such as basic concepts, so if you want to take the fire protection test, you must first understand this thoroughly, so that the other two subjects can be better understood.

2. The subject of "Comprehensive Ability of Fire Safety Technology" is an extension of technical practice, mainly to explain the practical experience of inspection, commissioning, acceptance and so on. The content of the architecture chapter is almost identical to that of the technical practice construction section, while the facility section focuses on practice. It mainly involves laws and regulations and professional ethics, building fire protection, fire protection facilities, fire safety management, and fire safety assessment.

3. The subject of "Fire Safety Case Analysis" is the integration and application of the first two subjects, biased towards practical application, this subject is often the most headache for many candidates, the questions are more flexible, and the amount of information is large, so this subject is the most difficult.

First-class registered fire engineer qualification examination subjects: "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis" 3 subjects, "Fire Safety Technical Practice" and "Fire Safety Technology Comprehensive Ability" subject examination time are both hours, "Fire Safety Case Analysis" subject examination time is 3 hours.

Question type of the first-class registered fire engineer examination: the two subject questions of "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Safety Technology" are objective questions and are answered on the ordinary answer sheet; The subject question of "Fire Safety Case Analysis" is a subjective question to accompany Zheng Da, and the answer is on a special answer sheet.

Examination subjects for second-level registered fire engineers: there are two subjects: "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis". The examination time for the subject of "Comprehensive Ability of Fire Safety Technology" is hour, and the examination time of the subject of "Fire Safety Case Analysis" is 3 hours.

Question type of the second-level registered fire engineer exam: The exam question type of the subject of "Comprehensive Ability of Fire Protection Technology" is objective, and the question type of the subject of "Fire Safety Case Analysis" is subjective.

The qualification examination for first-class registered fire engineer consists of three subjects: "Fire Safety Technical Practice", "Fire Safety Technical Comprehensive Ability" and "Fire Safety Case Analysis". The qualification examination for second-level registered fire engineer examines two subjects: "Comprehensive Ability of Fire Safety Technology" and "Fire Safety Case Analysis".

The examination time for the subjects of "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Safety Technology" is both hours, and the examination time of "Fire Safety Case Analysis" is 3 hours.

Registered Fire Engineer Question Type: The test question types of the two subjects of "Fire Safety Technical Practice" and "Fire Protection Technology Comprehensive Ability" are objective questions, while "Fire Safety Case Analysis" will have some subjective questions in addition to objective questions.

The results of the first-class registered fire engineer examination shall be subject to a three-year cycle of rolling management measures, and only those who have participated in the examination of the subjects in three consecutive examination years and passed the examination can obtain the qualification certificate of the first-class registered fire engineer.

The results of the second-level registered fire engineer examination shall be subject to a two-year rolling management method, and the qualification certificate of the second-class registered fire engineer can only be obtained by taking the examination of the examination subjects in two consecutive examination years and passing the examination.