Are there any tips for reviewing the 3 subjects of the Fire Engineer Exam?

We'll be happy to answer for you.

The simplest of the three courses is technical practice, followed by comprehensive ability, and case analysis is based on the first two subjects plus some normative provisions, so the key to good review lies in technical practice, and case analysis is the key to passing the exam, so the review order should be technical practice comprehensive ability case analysis.

Basic stage: literacy of teaching materials, emphasis on syllabus and accumulation;

Mainly understand the exam textbooks and specifications, and follow the chapters to do practice questions. It is recommended to read a book for at least 2 hours a day. Lasts 2 months; It is also necessary to master various norms and practice the question bank. It is recommended to read books for 2 hours a day for 1 month.

Reinforcement stage: comprehension and memory, strengthening practice and application;

It is recommended to read books for 2 hours a day for 1 month.

Sprint stage: comprehensive case training, pay attention to induction and summary;

Finally, the main question simulation is carried out, and more questions are done. It is recommended to practice the question bank for 3-4 hours per week for 3 months before the test, and to strengthen memory one week before the test.

Hope mine is helpful to you.

The review order is recommended as technical practice, comprehensive ability, and case analysis.

Technical Practice" Basics:

It mainly involves combustion foundation, building fire protection, fire protection facilities, fire protection of other buildings, and fire safety assessment.

It mainly focuses on the basic concepts, basic principles, classification and composition, fire extinguishing mechanism, selection and application and related design requirements, and is the most basic entry-level course for the fire engineer examination.

Lay the foundation for learning for "Comprehensive" and "Case". Novices can start with this textbook to fully understand the content of fire protection, and can have a big concept of fire protection from this book.

Comprehensive Ability:

It mainly involves laws and regulations and professional ethics, building fire protection, fire protection facilities, fire safety management, and fire safety assessment.

It is mainly aimed at fire inspection, construction acceptance of fire protection facilities, fire detection, fault analysis, maintenance and fire safety management related requirements.

It is an extension of technical practice, mainly to explain the actual operation experience such as inspection, commissioning, acceptance, etc., there will be a lot of small skills, which is very easy for candidates with practical work experience, and for novices, they need to combine technical practice to learn together.

The characteristics of synthesis are that it involves the specific application of the system, and there are many examination items that need to be memorized, which is a memorize subject.

Case Study:

It is the integration and application of the first two subjects, and the degree of quality of the first two subjects directly determines the passing of this subject.

Fundamentally, this textbook does not need to be studied separately, but the textbook has a super advantage, which is to give an architectural scene or a model, which aspects we should analyze and give a clear learning direction.

Cases are synthesized and practical real applications, and they also have a corresponding relationship with practice and synthesis.

For example, in practice, a certain chapter is about safe evacuation, and another chapter is about fire spacing, fire partitioning, garages, etc., but these numbers are very scattered and scattered to tell you that this is a standard requirement, and the case is to blend these contents into the background of a simulated building, so that you can find fault and judge whether the fire protection configuration of the building is a load requirement, which is similar to the actual operation.

In general, the simplest of the three courses is "Fire Safety Technical Practice", followed by "Comprehensive Ability of Fire Safety Technology". "Fire Safety Case Analysis" is based on the first two subjects, plus some normative provisions.

Therefore, the key to the review lies in the "Fire Safety Technical Practice", and the "Fire Safety Case Analysis" is the key to passing the exam.

There are three subjects in the exam, "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis", which add up to almost 10,000 knowledge points. The test center is complex, and it is a liberal arts certificate exam, which requires you to spend a lot of time understanding and memorizing knowledge points.

Characteristics of the three subjects.

2. Comprehensive ability: It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis: It is all about the practical application of real knives and guns, which is more difficult, and must be learned after technical practice and comprehensive ability to learn, not only because there are cases, but after some basic understanding of fire protection, you will also feel that this subject is particularly interesting.

The best way to prepare for the exam is to do more questions, summarize more, and review more.

Hello, glad to answer for you :

Fire Safety Technical Practice" is the most comprehensive, incisive and detailed, and easy to understand. And practice is the foundation, and only by laying a good foundation can we continue to learn solidly.

"Comprehensive Ability of Fire Protection Technology" has the most relaxed people with practical work experience, and the content is mostly inspection, commissioning, acceptance and other work content.

Fire Safety Case Analysis" is relatively difficult, this subject is relatively comprehensive, requires a certain basic knowledge, first learn the first two subjects, this subject will not be dizzy. Although there is such an order, the three books are interrelated. After the first study, you can study again step by step, and integrate the points of knowledge, so that the preparation effect is better.

In preparing for the first-class fire engineer exam, you must pay attention to the following issues.

01. Don't blindly brush the questions.

02. I think I have a firm grasp of knowledge.

As mentioned in the previous article, after the knowledge is firmly grasped, you can brush the questions to consolidate the knowledge. So what does it mean to have a solid grasp of knowledge? Many candidates memorize it or listen to it once, and then do a good job in the questions, and think that they have mastered it well.

In fact, for the fire engineer exam, the key basic knowledge needs to be mastered by the degree of proficiency. For example, how to test whether you have a firm grasp of the knowledge point of "fire partitioning"? Take a blank piece of paper, can you write it silently, and whether the various building categories, factories, warehouses and civil buildings can be written silently?

If not, it means that it is not skilled enough and needs to be strengthened. Another example is the facility article, whether the setting place of self-spraying can be proficient in silent writing. Therefore, don't ignore the mastery of key basic knowledge, when you reach the level of mastery, a lot of complex knowledge will be solved!

03. Ignoring the establishment of the framework.

Many test takers often complain that they understand the knowledge, why are they easy to make mistakes when doing the questions? In fact, on the one hand, the knowledge is not firmly grasped, and on the other hand, there is no knowledge framework, so how to establish a knowledge framework? It's still the old way, take out a piece of paper and write, as the saying goes, a good memory is better than a bad pen, this truth has been tried and tested repeatedly.

For example, "safe evacuation", including several contents, there are several parameters, the three parameters of the steady fire "Xiaomi, big money, and close distance" have basically summarized all the content of the safety evacuation, and extend the specific knowledge points from these three parameters, how the specific knowledge points are stipulated, and how these knowledge points are related to each other, this is the framework, in this large framework step by step to fill in the specific knowledge, I believe that according to this template to review, there will be no more cases where the knowledge points will not be used flexibly.

04. Case study and question making method.

Many candidates have heard others say that case analysis has to be done, but they don't know exactly how to do it. It's just to find a few questions to do, but in fact, how to do the questions also has to pay attention to ways and methods. As we all know, case analysis is the focus of learning fire engineers, but also the difficulty, how to do case analysis?

The teacher requires us to do the questions at the specified time, such as the case analysis practical class of Wenwen Fire Fighting, which requires us to answer the questions within the specified time, set a time limit, and simulate the real situation of the exam. Don't do it if you can't finish it, find the reason, why you can't finish it; If you don't do it well, don't turn the book, find out the reason, why it won't, and how to strengthen it. In this way, the test situation is simulated to do the questions, which not only exercises the mastery of knowledge points, but also the ability to respond on the spot and the ability to resist psychological pressure.

Avoid eye-to-eye and low hands. In the last month, we had to take a set of case analysis mock questions (six big questions) every day and spend three hours to do the questions, just like the exam, to find out the weak links and target each breakthrough.

1. Hello, the registered fire engineer has a total of three subjects, and the results of the three subjects are valid for three years, which means that you can pass the three exams within three years. The three exams are "Fire Safety Technical Practice", "Fire Safety Case Analysis", and "Comprehensive Ability of Fire Safety and Safety Technology".

2. The examination questions of "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Protection Technology" are objective questions. Multiple choice questions require you to choose the most appropriate option from the alternatives as your answer. In each question of "multiple-choice questions", there are two or more options that match the meaning of the question, and no points will be awarded for incorrect selection; Missed selection, each selected topic is scored.

In all multiple-choice questions, there are 80 multiple-choice questions, each worth 1 point; 20 multiple-choice questions, each worth 2 points.

3. The 15-year question type of the "Fire Safety Case Analysis" subject test is 6 subjective questions, and the subjective question is a comprehensive case analysis question; After 16 years, the question type is 2 multiple-choice questions + 4 subjective questions, and the subjective questions are comprehensive case analysis questions. The total marks of the three subject papers are 120 points. A minimum score of 72 (inclusive) is required for each subject.

4. The examination results shall be subject to a rolling management method for a cycle of 3 years, and only those who can obtain the qualification certificate of a registered fire engineer can be obtained by taking the examination of the subjects in 3 consecutive examination years and passing the examination. On August 24, 2015, the Fire Bureau of the Ministry of Public Security issued Document No. 233 of 2015 for the examination of registered fire engineers in the middle of November in the second half of each year.

Hello, the order of the subjects of the first-class registered fire engineer examination can refer to the 18th year (the announcement of 19 years has not yet been released) November 10, 9:00-11:30 a.m. "Fire Safety Technical Practice".

14:00-16:30 p.m., November 10 "Comprehensive Ability of Fire Safety Technology".

November 11, 9:00-12:00 a.m. "Fire Safety Case Analysis".

The content of the exam can be referred to the following figure:

Hope it helps.

The examination for Registered Fire Engineer I is generally held on the second weekend of November each year.

9:00 a.m. to 11:30 a.m. on the first day of the first day to take the "Fire Safety Technical Practice"; 14:00 16:30 in the afternoon "Comprehensive Ability of Fire Safety Technology";

The next day, 9:00 a.m. and 12:00 p.m., take the "Fire Safety Case Analysis".

The full score of the three subjects is 120 points, and 72 points are passed. "Fire Safety Technical Practice" and "Comprehensive Ability of Fire Safety Technology" are both objective questions, with 80 single choice questions + 20 multiple choices; "Fire Safety Case Analysis" is 2 multiple-choice questions + 4 subjective questions.

9:00-11:30 a.m. on the first day: "Fire Safety Technical Practice": objective questions (80 single choices, 20 multiple choices); out of 120 points; 72 points passed.

14:00-16:30 p.m. on the first day, "Comprehensive Ability of Fire Safety Technology": objective questions (80 single choices, 20 multiple choices); out of 120 points; 72 points passed.

9:00-12:00 a.m. on the second day, "Fire Safety Case Analysis": 6 questions on comprehensive case analysis; out of 120 points; 72 points passed.

The examination is three subjects, the examination cycle is three years, the relevant results are valid for three years, and the results are managed on a rolling basis.

The 2018 Class 1 Registered Fire Engineer Examination is arranged as follows:

November 10, 2018 9:00-11:30:

Fire Safety Technical Practice 14:00-16:30:

Comprehensive capacity of fire safety technology, November 11, 9:00-12:00:

Fire safety case study.

2019 exam sequence and timing.

November 9, 9:00-11:30 a.m. "Fire Safety Technical Practice".

14:00-16:30 p.m. on November 9 "Comprehensive Ability of Fire Safety Technology".

November 10, 9:00-12:00 a.m. "Fire Safety Case Analysis".

Fire engineer can be said to be one of the professions of fire in recent years, and the number of applicants for the exam every year in the past two years is very large, so which ones are tested in the exam, through the introduction of the following article, you will have the answer!

There are 3 subject textbooks for the first-level fire engineer examination, namely "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis".

The knowledge of the three subjects can be broadly divided into five modules:

1. Basic knowledge of fire protection (the first part of practice);

2. Building fire protection (practice.

2. 4 articles, 2 comprehensive articles, 1 case 1);

3. Fire protection facilities (the third part of practice, the third part of the comprehensive, the second part of the case);

Fourth, laws and regulations and fire management acres of this shed management (comprehensive section.

1. 5, Case 1.

4 and 5 articles);

5. Safety assessment (the fifth part of the practice, the fourth part of the comprehensive, and the third part of the case).

No, the first-level fire engineer examination can be tested in one subject first, and the first-level fire engineer has a total of three subjects: "Fire Safety Technical Practice", "Fire Comprehensive Ability" and "Fire Safety Case Analysis", and all three subjects need to be passed within three years to obtain the qualification certificate.

Examination results are managed on a rolling basis for a period of 3 years. Those who take all three subjects must pass all the subjects in three consecutive examination years to obtain the qualification certificate; Those who meet the conditions for exemption from the examination and take the examination of 2 subjects must pass all the subjects taken within 2 consecutive examination years in order to obtain the qualification certificate.

The qualification examination for a registered fire engineer is organized and implemented by the Personnel Examination Center of the Ministry of Human Resources and Social Security, and the examination system of the national unified outline, unified proposition and unified organization is implemented. The qualification examination for Registered Fire Engineer Class 1 is scheduled to be held in the fourth quarter of each year.

In recent years, China's fire protection work has made great progress, but major fires still occur from time to time, which exposes the degree of socialization of China's fire protection work, management level and fire safety guarantee ability still need to be further optimized and improved, and the most fundamental reason is reflected in the construction of the industry talent team and the lack of professional socialized fire protection technical services in the standardized market, as well as fire professional and technical service personnel.

According to the statistics of relevant departments, at present, there are about 200,000 professional and technical personnel engaged in fire protection in China. At the same time, due to the non-standardization of the professional system, the society lacks the correct cognition and effective evaluation of employees, which greatly restricts the construction and development of the social fire protection technical personnel, and also affects the improvement of the level of social fire management, and the industry has an urgent demand for high-quality, professional and professional fire professional and technical personnel.

The fire protection engineering major belongs to the public security technology category in the engineering category in the professional disciplines, of which there are 6 majors in the public security technology category, and the fire protection engineering major ranks first in the public security technology major, and ranks 44th in the entire engineering category.