May I ask if my phone falls into the toilet and gets into the water, can it still be used? What to d

Solution: 1. If the mobile phone is flooded, do not do any key operation on the mobile phone at this time, open the battery cover and take out the battery, ** card, and memory card.

And blow dry with a hair dryer (do not use hot air.)

Try to use warm and cold air, do not blow on the phone).

2. Shake the phone a few times to shake out the water that can be thrown out (be careful not to throw the phone out), and then use a dry rag or paper towel to wipe off the water droplets.

3. Pour the alcohol into a box with a sealed lid (a sealable bag can also be used, the amount of alcohol can soak the whole mobile phone), put the mobile phone into the alcohol and soak for about 5 minutes (high concentration of alcohol has water absorption, which can absorb the water in the mobile phone, and its volatility.

It can also be volatilized quickly).

4. Take out the mobile phone and use a hair dryer to blow the warm wind for about 10 minutes to speed up the evaporation of alcohol (after this step, if you use the mobile phone urgently, you can also use it, but some small gaps inside the mobile phone still have moisture, so if you are not in a hurry, it is best to patiently go through the following steps).

5. Put the mobile phone into the bag containing the rice (let the rice not pass the mobile phone, and the mobile phone should not be turned on) and let it stand for about 2 days to use it with confidence (the rice has strong water absorption and can absorb the residual water in the mobile phone).

The mobile phone fell into the water, and after it was fished out, quickly unplug the battery, and never turn it on, nor press the power off button to turn it off. Many people rush to turn on their mobile phones after they get into the water and wipe off the external liquid with paper or cloth to check whether the mobile phone is normal, which is extremely incorrect. Because of the touch of the button, the main version of the mobile phone will generate a current, in the state of water ingress, the electronic components will be damaged due to moisture short circuit), remove all parts that can be removed:

For example, memory cards, batteries, detachable shells, etc., and then immediately use a hair dryer (cold air setting) to blow on the fuselage, keyboard gaps for a long time, and in summer, you can also put it in front of an electric fan to blow. If this is not possible, use paper or cloth to wipe off the liquid as much as possible, and then use the hair dryer when you get home. Then, most importantly, within 48 hours, never turn on the phone, put the phone in a cool and ventilated place at home (do not put it in the sun), and the battery should also be blown.

After 48 hours, install the card, install the battery, turn it on, and try all the functions. Whether it's good or not depends on luck. I used to have a Samsung, I threw it in the washing machine and washed it again, and when I dried my clothes, I found that it could still be used after taking it out to dry, but the screen was a little empty.

Generally, mobile phone repair points are reluctant to repair the water machine, because of improper operation in the early stage, the owner starts the machine after the water ingress, resulting in a short circuit in the circuit version of the damage, and the circuit will produce a lot of "rust", which must be removed manually little by little, which is very time-consuming, and the maintenance fee is generally 50 yuan.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Unplug the battery immediately. Leave your phone dry or blow dry with a hair dryer. After that, the battery can generally continue to be used normally.

Immediately remove the battery, and then the mobile phone button goes down to the bucket to enter the water, wipe the surface water layer with a dry cloth, and use a hair dryer to blow the circuit board after unpacking, I hope it can be saved, Amen!

I can dry it with a hair dryer immediately. Serious to disassemble the machine to blow.

In the first step, many users have the first reaction to quickly fish the phone out of the water after the phone falls into the water, which is very correct. Although many mobile phone manufacturers now ensure the waterproof performance of mobile phones when publicizing, the longer the mobile phone is immersed in water, the more likely it is to have quality problems. Therefore, after the mobile phone accidentally fell into the water, try to get the mobile phone out of the water as soon as possible.

In the second step, many users may get rid of the water in the mobile phone immediately after fishing it out of the water. In fact, this practice will allow the water droplets to soak into the internal structure of the phone more quickly. The correct way to do this is to remove the board of the mobile phone and dry it.

If it is impossible to disassemble, try to use a hair dryer to dry the moisture in the phone. At the same time, you need to be careful not to use too high a temperature, otherwise the components in the phone will burn out.

The third step is that when the phone is basically dry, it is best to place the phone on the dryer, so that the residual moisture in the phone can be adsorbed clean, so that the phone can really reach a state of no moisture. There is no limit to the time the phone can be placed on the dryer, but the author suggests that it is best to keep the phone as long as possible, so that the phone can really ensure that there is no moisture, after all, whether there is still moisture left inside the phone, from the surface of the phone is not visible.

Fourth, you may think that the mobile phone can be turned on and used when the water is adsorbed cleanly, but this practice is not correct. After the moisture in the mobile phone is cleaned, it is best to turn on or charge the mobile phone after a period of time, which will reduce the harm of the mobile phone. The above 4 steps are the best solution in the case of water in the mobile phone, and the mobile phone that learns the above 4 steps into the water may be saved.

If you are using a Huawei phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance. You can check the address of a nearby Huawei Customer Service Center on the Huawei website.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

1. After the mobile phone falls into the water, quickly pick it up, immediately turn it off in a posture, and wipe the surface moisture with paper; Then use a hair dryer to dry the phone, and carefully dry the gap between the volume button and the shell, the charging port, the headphone jack and other places. 2. Pick up the mobile phone and shake it dry, wipe it dry with a paper towel, then put it into the rice, and let it stand for 24 hours to absorb the water in the mobile phone. Wait 24 hours before turning it on, and if there are other problems, it is best to send them to the mobile phone store for repair.

What should I do if my phone falls into the toilet water?

When the mobile phone accidentally falls into the water, be sure to scoop the mobile phone out of the water as soon as possible; Then shake the phone vigorously a few times and try to shake off the moisture on the phone. Be careful not to throw your phone out of the way. When the all-in-one computer is flooded, do not press any keys, including the power button, the volume button of the pants, the home button, etc., so as not to cause water to enter the inside of the phone and burn the phone.

If your phone turns on or off, leave it as it is.

Then use a tissue to carefully dry the moisture on the screen and buttons of the mobile phone, for the mobile phone, the faster the moisture dries, the better. After drying off the phone, it still can't be turned on. It should be noted that when using a hair dryer to dry your phone, you must not use hot air that is too hot, as this will cause the components in the phone to burn out due to high temperature.

If you go to the beach to play, the mobile phone falls into the salt water, or the mobile phone falls into the toilet with toilet cleaner when you go to the toilet, it will corrode the mobile phone, you should rinse it with clean water first, and then immediately take it to the mobile phone repair shop and find a professional to deal with it. It's best not to dispose of it yourself, but if you just fall into the water, you can do it yourself.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake your phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by a hair dryer, etc., it may penetrate into other components of the screen, which will cause the mobile phone to get wet and damage the electronic components).

The first point is to shut down. The power supply of the mobile phone is divided into battery B+, direct power supply and system operation, which is powered by the power supply system, and the system power supply is cut off after shutdown, although the battery power supply cannot be disconnected, but more damage can be avoided.

Second, don't shake it vigorously. Now the mobile phone is an all-in-one machine can not be disassembled casually, after the mobile phone is fished out, the water is naturally controlled, let the water flow out naturally, and then dry with a paper towel or towel with strong water absorption, don't want to vigorously throw out the water, the all-in-one machine is closed and waterproof The effect is relatively good, you not only can't get rid of the water, but will expand the erosion area of the water.

The third point is to send it for repair in time. The mobile phone is sent for repair as soon as it falls off the water during the day, don't worry if it falls off at night, don't use a hair dryer to dry, drying and heating will only accelerate the corrosion rate of metal electronic components, hot water vapor runs all over the inside of the mobile phone, and it will also enter the mobile phone screen, the correct way is to put the mobile phone in a cool place, don't put it in the refrigerator, wait until the day to find a reliable master, disassemble and clean it in time.

Just follow the above points.

Mobile phones are the equipment that contemporary Chanshan young people do not leave for a moment, even if they forget to bring their keys, they will not forget to bring their mobile phones, and even more so, there are many people who cannot do without mobile phones when they go to the toilet and take a bath. As the saying goes, "how can you walk by the river without getting your shoes wet", there are always some accidents in life that frighten you, such as the mobile phone falling into the water, so how to deal with this? Let's take a look with me!

What should I do if my phone falls into the water:

1.Quickly scoop up your phone.

The first step of the mobile phone falling into the water is to get the mobile phone out of the water as quickly as possible, reduce the contact time between the water and the mobile phone, and minimize the damage to the mobile phone.

2.Put your phone into a shutdown state.

Once your phone is out of the water, don't leave it to chance and try to use it to see if it's malfunctioning. The correct way is to shut down the computer directly, and if it can't be turned off, force it to shut down to prevent the motherboard from being burned.

3.Blot or dry surface moisture.

If there is water on the surface of the mobile phone, you should not shake the water dry by throwing the mobile phone, because it is very likely to throw the water into the CPU, you should use paper towels and cotton swabs to dry the surface moisture or place it in a cool and ventilated place to dry the surface moisture naturally.

4.Remove the card slot and let the water inside run out.

Use the card pick-up needle to take out the card slot on the side of the phone, and then turn the phone sideways to let the water flow out.

5.Disassemble the phone to remove any residual moisture inside.

Many people's mobile phones are all-in-one phones, if you don't know how to operate, you can take it to a mobile phone repair shop and ask a professional to help disassemble the mobile phone and clean the moisture inside.

If your phone still doesn't work after various "rescue methods", it is recommended that you buy a new phone as soon as possible so that others will not be able to contact you.

In addition, it should be noted that the stool does not use the hot windshield of the hair dryer to directly blow the moisture on the surface of the mobile phone, too high temperature is easy to damage the internal parts of the mobile phone, if you have to use the hair dryer, you can use the warm air gear or the air cooling gear to blow, and the distance should be kept at a long distance.

How to deal with the water in the mobile phone:

1. Turn off the power as soon as possible and remove the battery directly. Try not to operate more buttons during this process to avoid powering on the motherboard and causing a short circuit and burning the phone device. It is best to remove the SIM card, SD card as well after removing the battery.

2. Use a cloth or toilet paper to dry your phone thoroughly, but don't shake it too hard, as the water may disperse inside the phone.

3. Under normal circumstances, there is no need to disassemble the machine. After the above two steps, you need to use a hair dryer to aim at some small gaps of the mobile phone to blow and absorb water. Of course, in winter, you can also use an electric heating treasure or electric blanket, provided that you need to put a towel on it or something.

The main purpose is to use warm heat to evaporate the water vapor in the mobile phone. Remember not to use high-temperature air to avoid the expansion and damage of the device caused by high temperature after some devices are flooded. It is best to blow for more than 6 hours.

4. If you are still worried about the water in the mobile phone after the above steps, you can put the mobile phone in a dry rice bag, and after a day, the rice will suck the water vapor in the mobile phone.