Please why can t my printer work!! Just tonight! Urgent!!!!!!

Let me tell you about it! This problem is generally the most common and is caused by a conflict with the printer driver, you can turn off the printer and the computer first! After 1 minute or so, start it, and try to print it, I think it's okay to get this kind of problem, if it doesn't work!

First reboot your printer driver and then reinstall the driver, when prompted to restart the computer, please restart it,...I think 98 can be used this way!

There is a print test that you can try step by step.

The first thing might be that the wires aren't plugged in, and you check both ends.

The second possibility is that you clicked on the printer and then plugged in the machine.

Again, it may be that the printer is not on or the paper is jammed...

In short, it can be detected in the print job, but it is generally not connected.

If it really doesn't work, plug in the printer and restart the computer.

Check: 1. Software. Click Start - Print Fax Machine - (see if the default printer in it is the one you need, and if it is paused).

2. Hardware. Check whether the data cable is connected and the toner cartridge is connected.

Power off and restart the printer or restart the computer.

See if your default printer is the one you're working on. Choose a printer and then play. If the cable is not connected properly, it will show that the printer is not responding, and it should not be a connection problem.

I won't describe the failure, it's just a deviation of millimeters, or a variety of possibilities.

First of all, it may be that the printer has a print shift, I have not seen the real thing with this machine, and I am not familiar with the function of the menu. But this machine will definitely have a self-calibration function, find the function under the main menu or find the function similar to "calibrate the printer" under the settings menu, or "print self-calibration" function, test the printer after calibration, and print the offline test page to see if there is this phenomenon of color shift, if not, the printer itself is no problem, from the new installation of the printer driver, the problem can be eliminated. If you have these problems with offline printing, it is recommended to replace the ribbon first, because the vast majority of printer print quality problems are caused by consumables.

In the case that none of the above steps can solve the problem, take a look at the following sections.

Sublimation printer has high requirements for paper, and the printing medium needs to go through the printer 3 times in the printing process, so the printer paper will have a greater impact on the printing quality. I said that the problem caused by the paper problem is due to the thermal change of the paper during the heating process (the temperature reaches 160°C when heating), and the erosion of the paper by the liquid ink, which can cause this magenta shift. @@解决办法:

It is recommended to replace the paper for testing.

In addition, sublimation printers are very sensitive to dust, and if dust enters the print head or ribbon, the print quality is likely to be generated.

Serious effects, such as the formation of a very long white line, or the color shift shift, resulting in the scrapping of the entire sheet. In addition, sublimation printers also have high requirements for the working temperature, and if they work continuously for a long time, the accuracy of the color may be affected due to poor heat dissipation. @@解决办法:

First, if you have a hair dryer, the kind of fan mentioned last time, open the ribbon door and clean the dust inside the printer. In addition, your machine should come with a set of cleaning components, which are used to clean the inside of the printer. If you can't find it, then you need to clean the thermal imaging head yourself, but I looked at the structure of this machine, the possibility of you cleaning it yourself is not very large, if you can find the thermal imaging head, clean the thermal imaging head with paper, if you really can't find it, I will give you the simplest and most practical way, find a used "ribbon rack", remove the ribbon inside, find a piece of paper, wet half with water, the first half, but not too wet, just print something, the content is as simple as possible, a vertical line is the best.

At this time, the embossing roller will stick the wet paper tightly to the thermal imaging head, and there will be a natural cleaning effect during the operation of the paper, **note***not*to*use*wine*essence*and*any*what* of *chemical*clean*cleaner*,*, otherwise don't come to me if there is any problem!!

If I've tried all of these situations and still can't solve the problem, I'm sorry I can't help you, so I recommend finding your local Canon service station to check what the problem is.

The default printer is wrong, set the printer driver you installed as the default printer, this is the virtual printer that comes with the computer system.

If it's not the default printer selection error, is it a virus? Or is your software's default printer selected incorrectly?

The printer doesn't print what's going on.

How to fix the printer cannot print.

At a glance, you can tell that it is caused by the network printer and the network connection is not normal.

Try a different printer cable.