My printer won t print. Ask the master to help.

Reinstall the printer driver and try again.

The general method of judging the printer failure is as follows:

l) Whether the printer power cord is connected reliably or the power indicator is lit.

Check the power supply and power cable, turn on the power, and see if the power indicator is correct.

2) Whether the connection cable between the printer and the computer is reliably connected, check and reconnect the data cable between the computer and the printer.

3) Whether the printer driver is normal: If the printer is not used and the driver is installed, or the driver used is incorrect, there will also be abnormal printing failures.

4) Whether the setting of the serial port and parallel port is correct: the port used by the BIOS printer should be set to "enable" when the port used by the BIOS printer is turned on and the printer port in the software is set correctly.

5) Whether the print port mode in the BIOS is correct: Sometimes Win95 will automatically set the print mode to "ECP" mode, but some printers do not support the ECP type of print port signal. In this case, set the print port to "ECP+EPP" or "Normal".

6) Whether the printing test page is normal: If the printing test page is normal, it means that the printer hardware is not faulty.

7) Whether it is the cause of the virus: Use a virus detection software to check if there is a virus.

8) Check the printer's hardware: Check the printer's ribbon, print head, paper placement, etc.

If none of the above methods can be solved, it is best to ask professional maintenance personnel for repair.

If you make sure that everything is working properly with the printer, then:

Tap Start - Printers & Fax, in this window, double-click the printer icon you are using, then in the window that opens, tap "Printer" on the menu, and make sure that "Pause Printing" is not checked.

Could it be that the print service is not starting?

Right-click on my computer, management, services, there is a service called load files into memory printing, set it to automatic and start.

Printer problems You go to Epson's service department and ask.

There are many reasons why you can't print. What are the specific tips.

How to fix the printer cannot print.

Last **, look at what phenomenon, otherwise how to judge?

The printer can't print the quick scramble how to untie the acres of grinding.

The fault light is on, either the paper is jammed or there is no ink, if it is not, it will be troublesome and need to be repaired.

Try to reload the driver, or it will be a paper jam. Turn the printer off and back on.

See if the toner is still there, and see if it's jammed.

How to fix the printer cannot print.

One: the printer does not install the driver (that is, the printer is not installed normally) The printer must be installed normally to achieve printing, the general printer has a driver CD, we choose the corresponding model of installation, but many friends like to drive on the Internet, this situation may lead to the installation of the driver that is not the same model, resulting in the printer can not print. The solution is:

Try to use the printer driver that comes with the disc.

2. The power of the printer is not turned on or the printer is not online.

Solution: Check whether the power indicator and connection status light of the printer are on, if the power indicator is not on, please check whether the printer is connected to AC power normally, and whether the boot switch on the printer is on; If the connection status indicator is bad, you can press the button corresponding to the connection indicator to switch to the connection mode.