IBM Notebook How to Boot Disc 10

When there is a problem with the system, many cases because of this file corruption, ntldrYou can fix this when you reinstall.

Do you see if there's a problem with your disc? Or does the optical drive start when you reinstall your computer?

Yours is already booted on the disc and does not need to be in the settings, because your system has not completely crashed, it will boot with the hard disk. If the system is not broken, then just look for a system disk that can be installed. IBM is F2, no mistake should be the second sub of the second term, see the boot of the first boot device to cd *** rom OK.

Press F12 at boot and a blue dialog box will appear: The first option is hard disk boot and the second option is optical drive boot.

It seems that you didn't put in the system disk.,Try another one.。

Press F12 when booting up, and you can select a disc or hard disk to boot.

Start the computer, just press the DEL key (or F12) on the keyboard, and I can enter the motherboard BIOS setup interface by pressing it all the time.

Select the Advanced BIOS Features option and press Enter to enter the setup procedure. Select the First Boot Device option, then press the -or + key on your keyboard to set it to CD-ROM, so you can change the system to CD-ROM boot.

Start by packing the installation disc in a storage box.

When you boot up and enter the first logo.

Press and hold F1 to enter the BIOS option.

Find the boot option.

Press F10 after selecting the CDROM

Save to exit. Reboot.

After that, follow the disc prompts to install it. You can also try to press f12 to enter the boot to wish you. Good luck..

When powered on, press F1 or that Acess

IBM key, go to BIOS settings, there is a boot setting, select CD-ROM to boot, save exit (F10).

Hello: The default first boot item of IBM server is to boot from the optical drive, you can directly put the disc on the optical drive to restart the server. See if the server reads the disc.

If not, it can appear when the server is restarted, press F12 F12 on the F12 screen, then set the boot item to cd-ROM, and then press the Enter key and the server will boot from the CD-ROM drive.

Method 1: When you start up, you see a prompt F12, at this time, please press F12, after the POST is completed, the boot disk will be selected, and the disc will be selected to start;

Method 2: Press F2 to enter UEFI when you boot up

The above picture is the most intuitive, needless to say, select start options and select the first item enter.

If you don't understand it at this point, you don't have to touch the server.

Under normal circumstances, you don't need to do the settings, the default supports disc boot, if the original operating system has been installed, do a good job of re-doing the RAID in the installation.

There are options in the BIOS, don't change it casually, see that there is a from cd modification, just press F10.

Boot F12 is the order of selection, or click Setup to enter the settings is the complete menu.

Boot up press F2 to enter the BIOS In the second option, you find it yourself...