ZTE U950 can t connect to the wireless network, always get the IP address.

Manual setting (static setting), according to the IP address automatically obtained by others (not the same, for example, someone else is N, you set a different from N), subnet mask, gateway, DNS (other people's DHCP address is generally a gateway, you can't be the same), recommend a few DNS for you

Beijing, Shanghai. Tianjin, Guangdong.

Henan, Guangxi. Hunan, Fujian.

Jiangsu, Shaanxi. Hubei, Shandong.

Liaoning, Zhejiang. Chongqing, Anhui.

Heilongjiang Hebei.

Jilin, Jiangxi. Shanxi, Xinjiang.

Yunnan, Guizhou. Inner Mongolia, Sichuan.

Qinghai Hainan. Ningxia, Gansu.

Hong Kong and Macau. After static settings, see if you can surf the Internet.

It's not a problem with the machine, it may be a network problem, I 960S3 also appeared, I can't get the CMCC network in the mobile business hall, and I changed the nearby telecom Unicom are the same, I thought the machine was broken, I went to check, no problem, and later I knew that there was a jamming signal next to me at that time.

It's not a problem with the machine, it may be a network problem, I 960S3 also appeared, I can't get the CMCC network in the mobile business hall, and I changed the nearby telecom Unicom are the same, I thought the machine was broken, I went to check, no problem, and later I knew that there was a jamming signal next to me at that time.

I don't know, you go to the business hall and ask.

The wireless router didn't open the DHCP service.,Your computer uses an automatic IP address.,So it won't come.,You can set the IP yourself.,You can also look at the IP of the computers that can access the Internet first.,And then set it up as well.。

There are two services in Start-Settings-Control Panel-Management Tools-Services, both of which are related to obtaining IP.

remote procedure calldhcp client

Let's see if the server is open.

That is, there may be a problem with your NIC settings and environment configuration (your IP life is set very long and cannot be refreshed).

Mine too, I guess it's a network problem.

The mobile phone should be connected to the wifi (that is, the wireless network) to surf the Internet, and the settings for the computer to connect to the wifi are the same. You may need to set up a connection method on your phone, mainly an IP address acquisition method, with DHCP, or a specified IP address.

The mobile phone is connected to a specific computer through wifi, you need to set the computer's wifi network card to point-to-point mode, you can also install a virtual ap software, if it is an operating system above win7, you can directly set it as a soft ap, which is mainly a network for sharing computer connections.

The phone has a WiFi function, you can turn on WLAN in the settings to get the wireless network automatically.

But you need to have a wireless router or a wireless AP.

This depends on your wireless network router, if the wireless router does not open DHCP, it is the automatic assignment of IP address function, your mobile phone can never find the IP, you can check it, your route, to this function to open OK, there is also a way to set a fixed IP address on the mobile phone! This is to know which address segment you use for wireless routing, most of which is done, if this is this paragraph, you can set it to the following items.

IP Mask: Gateway: DNS:

You need to make sure that the wireless router has automatically acquired the IP address feature.

Your browser connection is messed up·· You may have been attacked by a virus. You just need to reinstall the system.

It's not a problem with the phone! It's a hot issue! Check out the wireless routers!

That function is fictitious.,You don't believe you can try wifi again.,It's not usable.,ZTE is a customized machine.,And it's cheap.,It's also very stuck to run.。

You can set it to automatically obtain an IP address.

I set up a problem, and I check that I want to set a problem.

Reboot the router a bit.

I can't see what your settings are, if your phone can't find the IP, you can specify the IP, subnet mask, gateway, DNS in the phone, so it's OK!

The settings for the u880 are:

Go to Settings -- Wireless & Network ---WLNA Settings--- press the menu key below---Advanced --- use static IP to tick--- below you set your route corresponding to the IP, subnet mask, gateway, DNS.

Automatically past the IP, you can also fill in manually.

You have to make sure that the wireless network you want to use is within range, then click on it to enter the password, and then click to connect, and that's it.

The network is not good, or it is turned off and turned back on.

Didn't you want a password for your original network, maybe now the user has modified the configuration, and all of them can't be connected to the network.

It must have been the user who changed the password.

With Card King. Crack the password of the wireless network card.