What should I do if water gets into the wooden floor? How to deal with water ingress into the wooden

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

1. Ventilation and drying.

If there is a large area of soaking water, the wooden floor should be carefully pried up, stacked in the ventilation place according to the "well" shape to dry, and the weight generated by its stacking to prevent deformation occurs, and the wooden floor with better quality can be used again under normal circumstances.

2. Blow drying. Dry the water, wipe the surface moisture with a dry cloth, and then use a vacuum cleaner to absorb the moisture in the splicing gaps of the soaked wooden floor or use the cold air setting of the hair dryer to dry it; Next, you can use some heavy objects to press on the small warped area, and after a while, the wooden floor will return to normal on its own.

3. Partial replacement.

If, after a period of time, the bulge at the seams goes down, but the color is too far from the original wooden floor, you can try to wax the wooden floor, and the soaked wooden floor after waxing will basically be the same as the original.

Fourth, remove the baseboard.

Whether it is a large area of water or a small area of water, it is best not to pry the wooden floor up to dry, which is easy to cause damage to the wooden floor, and is likely to cause serious consequences that cannot be used again. Quickly drain the surface water of the wooden floor, and then temporarily remove the baseboard of the wooden floor to expose the expansion joints, which allow the water vapor to be dissipated. Depending on the amount of water intake, it usually takes about seven to fifteen days to dry, and the wooden flooring with good quality or not soaked in water for a long time can recover on its own.

If it does not recover after 15 days, it will have to be replaced.

1. Water ingress in a small area of the floor.

When the floor is flooded, the first thing to do is, of course, to dry the water, first wipe the moisture on the surface of the floor with a dry cloth, and then you can choose a practical vacuum cleaner to suck up the water vapor in the splicing gap of the soaked floor or use the cold air stall of the hair dryer to dry; Next, you can use some heavy objects to press on the small area of the warped area, and after a while, the wooden floor will return to normal on its own. If, after a period of time, the joints have to bulge, but they are too far from the original shape of the previous floor, you can try waxing the floor, and the soaked floor after waxing will basically be almost the same as the original. If the color and shape of the floor are still very different from the original state after waxing, then only a partial replacement of the floor is required.

2. The water ingress of the floor is serious.

If there is a large area of soaking water, then we can not deal with it so simply, we should carefully pry up the floor, according to the "well" shape superimposed in the ventilation place to dry, with its stacked weight to prevent the occurrence of deformation, in general, for the quality of the solid wood floor can be used again.

3. Laminate flooring soaking in water.

Whether it is a large area of water or a small area of water, it is not recommended to pry up the laminate floor to dry, which is easy to cause damage to the laminate flooring, and is likely to cause serious consequences that cannot be used again. It is best to drain the surface water of the floor quickly, and then remove the baseboard of the floor, expose the expansion joint, and dissipate the water vapor by the expansion joint, but according to the size of the water intake, it usually takes about seven to fifteen days to dry.

4. Add keel, a small area of water-soaked solid wood flooring.

If a small area of water ingress is found in time, the ground can be cleaned, the board can be pried up, and the wet floor can be dried and reinstalled; If the water inflow is slightly large, not only should the board at the leakage be pried up, but also the opposite board should be pried up along the direction of the keel arrangement, so that the internal air circulation can take away the moisture. If you can't determine the size of the incoming water, it is best to pry up the board in turn according to the flow direction of the inlet water to check the humidity situation to be foolproof.

The following methods can reduce the loss: 1. Regardless of the size of the soaked area, it is not recommended to pry it up to dry, so that the floor will not be able to be used again. The correct way to do this is to quickly drain the surface water of the floor, remove the baseboard, expose the expansion joints, and rely on the expansion joints to dissipate the moisture.

2. If the solid wood floor enters the water in a small area, the water vapor can be sucked out with a high-power vacuum cleaner, but the floor needs to be pried up and dried in the shade for a large area of water. 3. After the soaking floor is pried up, the surface water of the floor should be wiped dry, and the reverse side should be placed upwards according to the "well" shape to prevent the surface from drying out and cracking due to rapid drying.

What to do if the wooden floor is blistered.

When a wood floor gets water, it's important to take action as soon as possible to take appropriate measures to minimize the damage before it worsens. Here are some proven solutions:

1.Rapid cleaning: When water enters the wooden floor, try to remove the residual moisture as soon as possible. Use an absorbent cloth or a dry towel to dry the moisture on the surface of the floor.

2.Ventilation and drying: Open windows or increase ventilation by other means to speed up the drying of wooden floors. Additionally, using a fan or air dryer can also help wick moisture off the floor.

3.Use a steam iron: Bring the steam iron to medium heat, move it to the damaged area constantly, let it dry completely, and clean it with a dry towel.

4.Use wood scrubs: Wood scrubs are chemicals that are used to clean wood and restore its shine. If the area is larger, it is recommended to use a wood scrub to better remove the stain.

5.Sandpaper: If the damaged area of the wooden floor is relatively small, sandpaper can be used. After it dries dry, the surface is sanded with sandpaper, and the thickness of the sandpaper needs to be selected to the appropriate type.

6.Prevention: Regularly protect your wood floors and use professional floor care to enhance their water resistance. In addition, the use of non-slip carpets also plays a role in high-water sections.

In short, when the wooden floor gets water, we need to try our best to remove the moisture first, and then strengthen ventilation and drying. If the damage is more serious, professional maintenance measures can be used, and it should be noted that for the floor of the painted car layer, professional equipment and tools should be used for maintenance and repair to avoid damage to the floor.

Water ingress into the wooden floor is a common problem, which can cause the wooden floor to be easily deformed and even rot, affecting the appearance and service life. If this happens to your wooden floor, here are some ways to deal with it:

1.Clean up in time: Use a vacuum cleaner or mop to absorb or wipe the water as soon as possible. If the wooden floor is exposed to a very small amount of water, you can choose to wipe it repeatedly with an absorbent dry towel until there is no standing water on the surface of the wooden floor.

2.Ventilation and drying: Sogaoshen opened the doors and windows, turned on the air conditioner, air humidifier and other equipment to ventilate and dry.

Moisture will be dispersed more widely during the ventilation process, and slowly evaporate inside the wooden floor, so as to avoid moisture gathering together and causing the wooden floor to rot and deform.

3.Partial drying: Use electric fans, electric heaters and other equipment to pour water on the wooden floor in a small area for local drying, so as to help the moisture on the surface of the wooden floor to volatilize quickly.

4.Remove mildew: If mildew appears on the wooden floor, you need to scrub vigorously with a towel soaked in bleach or disinfectant alcohol, and then ventilate and dry after wiping to ensure that the mold is killed and prevented**.

5.Maintenance coating: If the water-soaked wood floor coating has worn out or is broken, it needs to be re-coated to protect the wood floor from further damage.

In short, the wooden floor must be treated in time after it enters the water to avoid more serious consequences. In the process of daily use, waterproof measures should also be taken to avoid the impact of moisture on the wooden floor.

Hello dear, happy to answer your <>

How to deal with the water ingress of the wooden floor is the solution: 1. If it is only a small area of warping at the joint, you can use a heavy object to press on it, and the wooden floor will return to normal after a period of time. 2. If after a period of time, the bulge at the seam goes down, but it is different from the previous floor, you can wax the floor, and the soaked floor after waxing will basically be the same as before.

3. After waxing, the color and shape of the floor are still very different from the original state, and the floor at the bottom of the bed or large wardrobe can be replaced with the floor at the obvious place. 4. If it is laminate flooring, the baseboard of the floor should be quickly removed, the expansion joint should be exposed, and the water vapor will be dissipated by the expansion joint, and it usually takes about three to ten days to dry according to the size of the seepage water. Additional Information:

Jilin Province Shengxiang Floor Marketing Center Qu said that the floor is soaked by water consumers will often encounter, the floor has been soaked, if not treated in time or simply treated, the floor will be moldy, deformed, cracked, abnormal noise, etc. "Especially pure solid wood flooring and solid wood parquet, once blistered, the bottom of the floor is not treated in place, it is likely to mildew, breeding a lot of bacteria that are not conducive to physical health, if there are elderly people and children at home, it will cause some diseases. Mr. Qu reminded that the soaking of the floor is not a problem of floor quality, and many businesses will not bear the relevant responsibilities.

Once the floor is soaked in water, consumers can contact the brand merchants to provide professional pavement workers. Workers will remove the soaked flooring and reinstall it, "This procedure is complicated and cumbersome, so consumers try to buy branded flooring when buying flooring." ”

Hardwood flooring is a popular flooring material, which is beautiful, durable, and stable. However, if water enters inadvertently, it may cause the floor to warp, deform, crack, affect the appearance and even affect the service life. Here are some ways to solve the problem of water ingress into hardwood floors.

1.Remove moisture immediately.

Once the floor is flooded, it should be removed immediately. Use a dry towel or water absorber to remove as much moisture as possible from the ground. The longer the moisture is retained on the surface of the floor, the more damage there will be.

2.Airy. Open windows, open vents, or use a dehumidifier to ventilate to help moisture evaporate and dry. If the floor is in a humid environment, special attention needs to be paid to ventilation to avoid mold.

3.Bang out the stagnant water.

If the floor is well sealed and moisture does not evaporate naturally, you should identify waterlogged items and use a bucket, mop or other tool to carefully pop out the excess water. When banging, try to avoid impacts from other nearby floors.

4.Protect from sun exposure.

When the floor is damp, avoid the sun. The high temperature of the sun accelerates the drying of the material, causing the floor to deform. If direct sunlight is not avoided, the ground should be properly covered.

5.Humidifier.

In autumn and winter, the humidity in the air is relatively low, which can increase the humidity in the room and maintain the humidity of the solid wood floor, thereby preventing the floor from losing water.

6.Crack treatment.

If the solid wood floor cracks, the boards where the cracks occur can be replaced to ensure the integrity of the floor. ')