What are the causes of bulging wooden floors? Wooden floors bulge, what s going on

1. On-site inspection.

Sports wood floor maintenance staff, or stadium staff, when they find that the sports wood floor is soaked in water after work, don't panic first, be calm. Inspect the soaking site at the first time to eliminate potential safety hazards, such as whether there are wires, electrical appliances, flammable and explosive materials on the soaking floor, etc.

Then according to the degree of water immersion of the sports wood floor, a solution is formulated.

2. Soak in water lightly.

If the sports wood floor is lightly soaked, the lightly soaked and damp floor can be wiped dry and ventilated. If necessary, disassemble the sports wood floor to observe whether there is water on the ground and observe whether the floor is obviously deformed. If so, it needs to be removed and dried, and reinstalled.

3. Heavy soaking.

Sports wood flooring that is seriously damp or soaked in water for 30 minutes will be deformed, expanded, and lost its luster. Such sports wood flooring is basically scrapped and should be replaced, and attention should be paid to removing the moisture under the floor and drying it.

4. Precautions.

After the sports wood floor is soaked in water, it is important to pay attention to the fact that it cannot be blown by hair dryer, exposed to sunlight, or dried, which will accelerate the serious deformation and damage to the surface of the sports wood floor of the basketball hall.

1.The base layer is not well treated, causing the wooden floor to bulge: the ground is uneven or there are sand particles on the ground, so that the wooden floor is not cleaned before installation, so that there are some small sand particles on the ground or the ground becomes relatively rough, after the floor is installed, people in the process of stepping on it, the moisture-proof film and the balance layer on the back of the floor will be destroyed, and the moisture of the ground will cause the floor to bulge.

2.Improper handling of moisture-proof measures in daily life causes the wooden floor to bulge: this kind of situation belongs to improper moisture-proof treatment during installation.

If the moisture-proof membrane joints of the damp floor are not tightly glued with waterproof tape, although the balance layer on the back of the floor is not damaged, the floor has been in a humid environment for a long time, and the moisture may still enter the floor after the balance layer is eroded by moisture, causing damage to the floor. Improper use, due to the bulging phenomenon caused by water ingress at the floor joint, belongs to the improper use and maintenance of the user.

3.When paving the floor, there is no reserved gap to cause bulging: the floor ignores the principle of thermal expansion and cold contraction in the process of paving, and expands after being exposed to moisture in the use of the floor, because there is no gap reserved in advance, which causes the surface of the floor to bulge.

There are several reasons why the wooden floor is bulging, wrapped in seeds or low, and then walked into his castle, and the other is that it belongs to you or is underground, so it is said that it has been soaked for a long time, so it is too wet to take the water, so she hugged so you are too strict with the madman who did his purpose, and when you decorate, you should leave a little wind between the madmen.

Analysis of the causes of wood floor bulging: 1. The wood floor is mainly caused by uneven floors or sand particles on the flat ground, such as not cleaning the ground before installing the wooden floor, and the presence of some small sand particles will cause the floor to be packed. Or because people are stepping on it, the moisture-proof film and the back of the floor are damaged, and the moisture air can also cause the wooden floor to rise.

2. The wood floor bulge is directly related to the improper handling of moisture-proof measures, mainly because the moisture-proof work is not done during installation, although the back of the wood floor is not damaged, but due to the long-term humid environment, the wood floor is damaged.

3. Improper use will also lead to bulging of the wooden floor, such as water ingress in the joints of the floor, or because of the large area of water ingress will cause bulging.

2. If the ground moisture-proof measures are not properly handled, it will also cause the floor to bulge, in the humid ground, if the moisture-proof film connection is not glued with waterproof tape, although the balance layer on the back of the floor is not damaged, the floor has been in a humid environment for a long time, and the moisture may still enter the floor after the balance layer is eroded by moisture, causing damage to the floor.

3. In order to make the floor last longer, we should pay attention to the maintenance of the floor. If the bulging phenomenon caused by water ingress at the ground splicing place (such as: heating running water, large area of water ingress, etc.), it is a problem of improper use and maintenance by users.

The house is too damp, is it a wooden floor on the concrete floor?

1. When the wooden floor is bulging, the arching wooden floor and the surrounding wooden floor can be removed, and the arching phenomenon can be alleviated after a period of ventilation.

2. The gap between the bulges on the wooden floor is blocked, resulting in bubbles on the floor.

3. Clean up the contents of the expansion joints of the bulging wooden floor.

4. If the bubble area of the wood floor bulge is very small (the diameter is about less than 2cm).

5. You can directly polish and repair the position of the wood floor bulge (this method is more suitable for parquet).

6. If it is a laminate floor, the bulging wooden floor should be removed.

7. Then use cement to dry the ground, and then replace it with a new floor.

1. The moisture content is unqualified.

According to the requirements of the industry, the equalization rate of sports wood flooring should be between 6% and 14%. However, some sports wood flooring manufacturers are not strict, so that the sports wood flooring products that do not meet the standards leave the factory, and when they are paved to the stadiums, there will be deformation problems.

2. The installation conditions are not up to standard.

Before installing the sports wood flooring panels, the paved raw floors were not thoroughly cleaned, and there were sand or other small particles of debris that arched the panels. Before the installation of sports wood flooring, it is necessary to ensure that other construction projects of the venue are completed, and there will be no rain leakage and water running.

3. There are no moisture-proof measures for installation.

During the installation of sports wood flooring, there are no reserved expansion joints or ventilated baseboards. As a result, the air under the floor is not circulated, and the moisture on the ground is not volatilized in time, which is the increase in the moisture content of the wooden keel or the wool floor.

4. The maintenance is not waterproof.

In daily use, the stadium is not regularly ventilated, resulting in the increase of indoor air humidity, the increase of the moisture content of the wooden floor, and the swelling and bulging of the sports wooden floor.

Answer to daily home life, the wooden floor laid on the ground will also be bulging, once the floor is bulging, it is a serious inconvenience to our home walking, so what to do with the wooden floor bulging, what are the solutions to the wooden floor bulging? The causes of the bulging wooden floorBefore understanding the solution, we should first understand the causes of the bulging wooden floor: 1

The ground is uneven or the ground appears sand particles cause the ground to bulge, generally before the installation of the wooden floor, the decoration team cleans the ground, for which there will be some small sand particles left on the ground, or the ground is too rough, for this reason, after the installation of the floor, in the process of people's many trampling, the moisture-proof film and the balance layer on the back of the floor are destroyed, and the moisture of the ground leads to the floor bulging. 2.Improper handling of moisture-proof measures: This kind of situation belongs to improper moisture-proof treatment during installation.

On damp floors, if the moisture-proof membrane joints are not tightly glued with waterproof tape, even if the balance layer on the back of the floor is not damaged, the floor is in a humid environment for a long time, and the moisture may still enter the floor after the balance layer is eroded by moisture, causing damage to the floor. 3.Improper use causes the wooden floor to bulge, and the bulging phenomenon caused by water ingress at the floor joints (such as:

Heating running water, large area of water ingress, etc.), is a problem of improper use and maintenance. There is only one way to deal with the bulging wooden floor, which is to re-set and adjust the size of the expansion joint, you can find the original construction personnel or ask experienced carpenters to deal with it, but try not to let it develop so as not to get worse and worse. In addition to this, we must also pay attention to the maintenance of wooden floors in daily life:

In daily life, the indoor ground should not be flooded in a large area, and the windows should be closed at any time when the rainy season comes to avoid being wet by the rain; When cleaning, try to use a vacuum cleaner or semi-dry mop to take care of it, do not use a dripping mop to mop the floor, if you accidentally spill water on the surface of the laminate floor, immediately wipe off the water with a dry cloth to prevent water from leaking from the floor joints.

Check whether the distance between the expansion joints around the wall of your floor is appropriate, and the composite board should leave left and right gaps around the wall, and if the room is large, the length and width should be more than one meter

How to deal with wood floor bulges:

According to the surface inspection specifications during the warranty period of wood flooring, if the diameter of the bulge is less than or equal to 2 cm, if it is laminate flooring, it should be replaced; If it is a parquet floor, it should be sanded and repaired on the original board to be as close as possible to the original flooring color.

If it is within the warranty period, the consumer can contact the supplier directly for a replacement. However, when it comes to replacement, many dealers may pry the bulging floor out and install the new board in the bulging area. Since it is difficult to bond well between the new board and the old board, this replacement method is generally not recommended.

If the bulging floor is in the middle of the house, the correct way to replace it should be to disassemble the floor from the opposite wall, replace the bulging floor, and then gradually pave it. However, it is advisable to place the old floor next to the wall to the bulging floor and the new board next to it. This prevents the new slab from arching.

Wood floors bulge can cause a variety of reasons, here are some of the common ones:

1.Temperature change: When the indoor heating is in winter, the moisture under the wooden floor will be heated, causing the wooden rental floor to get damp and the floor to bulge.

2.Humidity: In a humid environment, the floor will absorb moisture and the wooden floor will bulge as a result. This is especially true in damp basements or suspected basements.

3.Improper installation: If the floor is not flat or the plank does not have enough room for expansion when the floor is installed, the floor is prone to deformation and unevenness, resulting in bulging.

4.Poor quality of flooring materials: If the material of the flooring is not good, lacks stability, or is not strong enough, it is also prone to bulging. Such a laying process requires a highly skilled construction personnel, otherwise improper installation will easily lead to floor bulging.

5.Long-term heavy loading: If heavy objects are pressed on the floor for a long time, the floor is also prone to bulge, which usually occurs in places where there are many disadvantages such as placing furniture.

In short, if there is a bulge problem on the floor, it needs to be repaired as soon as possible, because long-term bulging can cause the floor to break, loosen, and even affect the quality of life. Therefore, when choosing a floor, you can refer to the product quality, specifications, and professionalism of installation to avoid floor bulging.

1. Caused by moisture: If the ground is not cleaned before the installation of the floor, resulting in uneven ground or sand particles, in the floor put into use, after a long time of stepping, the moisture-proof film and the balance layer on the back of the floor are easily damaged, so that the moisture of the ground will cause the floor to bulge.

2. Improper handling of moisture-proof measures: If the moisture-proof measures are not taken when installing the wooden floor, or if it is not treated well, it will also lead to blistering of the wooden floor, so the moisture-proof film connection should be tightly glued with waterproof tape when installing the wooden floor.

3. Caused by improper use of wooden floors: Many wooden floors bulge because of water ingress in the gaps between wooden floors, such as heating soaking water or long-term soaking caused by water leakage, etc., which belongs to improper use and maintenance, and moisture-proof measures are not done.