How to protect the floor, what to protect the wooden floor

Ways to Extend the Life of Your Floor: Five Principles for Protecting Your Hardwood Floor.

The floor is trampled on countless times a day, but it is easy to be ignored, and it is usually just a wipe, in fact, if you pay attention to some small details, you can increase the life of the floor with half the effort. Here are five key points to protect your flooring, so that your flooring is more durable, and the hard work of DIY flooring will last longer.

1.All types of floors need to be dusted frequently.

Places where dust is usually removed with a broom or vacuum cleaner and often trampled.

Be diligent in vacuuming. Pay special attention to the foyer and the walkway that leads to the outside. In addition, in order to prevent dust from entering the house, you can place a dust mat at the entrance or install a dust strip at the bottom of the door.

2.Dry is better than wet.

When using a mop to clean the floor, it is better to wring out the mop before using it, and if the mop is too wet, water will seep into the joints when in use, hurting the floor, causing the floor to be warped and deformed, especially wood floors, plastic floors, and cork floor tiles.

3.Choose the right skin care products carefully.

Choose a water-based wax suitable for the floor, use only one wax product at a time, if you use different wax products to mix, it will react with each other, making the floor sticky and dirty.

4.The dosage of wax should be appropriate.

If it is applied too thickly, the dust will stick to the floor more easily, making it more difficult to polish the floor.

5.Be careful when moving.

If you want to move the furniture, it is recommended to use the lifting method and avoid dragging to avoid scratching the floor; To further protect your floor, add a cloth cover or gasket to the bottom of the furniture.

The general wooden floor is waxed and waterproof, and it can be mopped with a wet mop, but it is best to mop it again with a dry mop after mopping to remove stagnant water. The maintenance of wooden floors mainly pays attention to moisture-proof, maintaining ventilation to reduce indoor humidity, waxing every one or two years, and being afraid of insects (especially termites, if found, they must be eliminated in time).

In order to avoid damage to the finished floor tiles during the construction process, it is necessary to take correct maintenance measures for the finished floor tiles. The use of floor protection paper can not only prevent the leakage of paint liquid, but also isolate the dirty construction environment and prevent grit and other abrasive floor surfaces; It can also increase the safety factor during construction.

Do not rush to walk around and pile up sundries after the floor tiles are paved, so as not to cause the floor tiles to loosen. After it is completely dry, it will be necessary to cover the surface of the floor tiles with a protective layer.

Paving protection products also need to take some thought, and the correct use of protective products can effectively play a protective role. 1.Make sure the floor surface is clean and dry, and wipe all dust, debris, filth, etc. clean2

Lay the floor protection product label face up on the ground, and make sure that the laying is flat, flatten to the required length and cut it with a utility knife or scissors. 3.Tape all edges, seams or overlaps with adhesive tape, and the adjacent floor protection product should be tightly attached when the tape is attached to avoid the tape remaining on the floor. Protection.

We all know that in the process of decoration, sometimes our floor has been laid, in this case, and then other hidden relatives of the renovation and transformation, it is easy to cause damage to the floor. Therefore, when we renovate and renovate, we must do a good job in the protection of the floor. So how should the floor be protected when decorating?

1. Dust-proof work.

The impression of the floor should be clean and bright, and what we don't want when we are working is that there is dust on the floor, because if there is a lot of dust, it will be very troublesome for us to take care of. But dust is inevitable when decorating. Therefore, before we decorate, we now put plastic film or dust cloth on the floor, so that this problem can be well avoided.

Of course, the method is to lay the floor as a link.

2. Moisture-proof and waterproof.

Unlike ceramic tiles, most of the floors are made of wood, and they are more resistant to water. It's not like tiles that can be wiped off with a cloth after getting wet. If the floor is damp for a long time, it is prone to bulging and mildew.

When we decorate, we must pay attention not to use too much water. In addition to laying dustproof cloth on the surface of the floor, it can also be used as a certain waterproof and moisture-proof facility!

3. Anti-bumping.

In addition to waterproof, moisture-proof, dustproof and other protective measures to be done, there is also a relatively damaging behavior of the floor in the decoration, that is, bumping. Because when decorating, some building materials, decoration utensils, etc. will cause bumps to the floor. This makes it easy to damage the surface of the floor, which is not very beautiful.

Therefore, when we decorate, the floor surface should not be placed with heavy building materials, and the decoration process should also be careful!

1. Keep dry. Wooden floors are very afraid of water, do not use wet mops or alkaline water in daily life, otherwise Chi Lasong will destroy the paint film on the floor and affect the brightness. 2. Clean up in time.

After there are stains on the floorboard, it is necessary to clean up the leakage in time, otherwise it will be difficult to clean up after a long time, and you can use a rag dipped in laundry detergent to wipe gently. 3. Avoid direct sunlight. Wooden floors should not be exposed to the sun for a long time, otherwise the ultraviolet rays in the sun will damage the paint film and crack the floor, and it is best to put a layer of things on the place where the furniture is placed to prevent scratches.

1. Keep dry. Wooden floors are very afraid of water, do not use wet mops or alkaline water in daily life, otherwise it will damage the paint film on the floor and affect the brightness. 2. Clean up in time.

After the stains on the floor are missing, they should be cleaned up in time, otherwise it will be difficult to clean up after a long time, so you can use a rag dipped in laundry detergent to wipe gently. 3. Avoid direct sunlight. The wooden floor should not be exposed to the sun for a long time, otherwise the ultraviolet rays in the sun will damage the paint film and crack the floor, and it is best to put a layer of things on the place where the furniture is placed to prevent scratches.

1. The humidity in the room should not be too large, keep the floor dry and clean, and wipe it with a wrung out cotton mop for daily cleaning; In case of stubborn stains, you should wipe them with a neutral cleaning solvent and then wipe them with a wrung out cotton mop, and do not use acid, alkaline solvents or organic solvents such as gasoline to scrub.

2. Pay attention to avoid scratching the floor by hard objects such as heavy metal sharps, glass porcelain tiles, shoe nails, etc. Do not mop the floor surface when moving furniture; Do not expose the floor to an open flame or place a high-power electric heater directly on the floor; It is forbidden to place strong acidic and alkaline substances on the floor; Prolonged immersion is absolutely prohibited.

3. In order to maintain the beauty of the solid wood floor and prolong the service life of the paint surface, it is recommended to wax and maintain it twice a year. Wipe the floor clean before waxing, then evenly apply a layer of floor wax on the surface, and wipe the bright mold with a soft cloth after it dries slightly.