What should I do if I want to harden the fabric, and what should I do if I want to achieve a similar

Brush with a layer of clear glue and let it dry, or paste it on top of a side of the drawing and let it dry.

For this, try brushing a layer of paste, or try white latex. After drying, it will become hard, if it doesn't work, you can try a few more layers.

When cooking, make more rice soup, then soak the cloth and dry it, and it's OK.

Sprinkle with glue and apply more, it will naturally harden.

Brush one side with glue and spray some mousse can have an effect

It is to mix cornstarch with water, then boil some boiling water and pour it in, put the cloth into the water, soak it evenly, and dry it.

Try brushing a layer of paste, or try white latex.

Sizing, a lot of cloth is sized.

When cooking rice, some rice soup is left behind, which can be used for starching, the thicker the rice soup, the harder the cloth will be after drying.

Add water, put outside, and the next morning must be hard.

Wipe egg whites, plaster, water!

You can take rice milk Jiang for a while.

Apply it with latex and let it dry.

Just paddle it with rice soup.

The clay method is to brush rice soup. But only one-time.

Apply it all over with acrylic paint.

The general fabric requires the Shentuan draft to add softener for the feel, which basically has no impact on the subsequent process. If the process you are talking about is clothing cutting, then it may have no impact. The softener is added when the fabric is set, and it has no major impact on the performance of the fabric, but only increases the feel of the fabric.

This is the name of a person or a place, you need to know the name of the manufacturer, the name of the brand or the approximate model to help you, and the automatic control system does not need to have any names that are written by people!!

Create a spring plus spring constraint.

In the Outliner, find the child particles under the patch as soft bodies, select the particles, and in the Dynamics module, find the soft rigid bodies--- in the settings options behind Create Springs, set the creation method to wireframe, and set the wire walk length to 2. Click the Create button.

Then, in the properties bar of the spring, modify the spring stiffness, damping size to fit the effect.

Happy learning.

What is it for?

The paper crafts I make are generally brushed with latex.

Watercolors can be painted on canvas, but the effect is not very good and does not stand up to preservation and washing.

If you want to paint on canvas, it is recommended to use acrylic paint. Watercolor is suitable for drawing on paper.

Acrylic pigment is superior to other pigments, it is a flexible film after drying, strong and wear-resistant, water-resistant, corrosion-resistant, anti-natural aging, no fading, no deterioration and falling off, the picture is not reflective, easy to rinse after painting, suitable for easel painting, indoor and outdoor murals, etc.

It can be stacked repeatedly to draw a heavy feeling; If you add powder and an appropriate amount of water, it is similar to gouache; Add a lot of water to create a watercolor and fine brush effect. It is advisable to paint on rough surfaces that are easy to absorb water, such as cardboard, cotton cloth, etc. Use general oil brushes, painting knives, Chinese paintbrushes, etc.

Watercolors can be painted on canvas, but not if you want to store or wash for a long time.

The difference between cloth and watercolor paper drawings:

1. The rendering effect is greater, because the cloth has a stronger ability to absorb water than watercolor paper. So if you don't need to render, it's best not to put anything in the water. Unless you're a dry watercolor painter, you could ruin the painting.

2. Both are placed in a cool place, these two materials are watercolor, and they cannot withstand the torture of the sun and high temperature. It is best framed.

Tip: If you want to paint on canvas, you can use acrylic and textile fiber paints, both of which can be used to create an effect. Generally, online hand-drawn t-shirts are drawn with these two types.

However, it is best to use a special blending agent for propylene and textile fiber pigments, otherwise it will also make the cloth wet in a large piece. When painting, the yellow wool paper (practicing calligraphy), newspapers, calligraphy and painting wool pads with good water absorption ability should be put on the pad under the cloth. So as not to faint on the table below and make your canvas stained.

Acrylic painting has a good gloss and is suitable for dry painting on cloth. There is a certain amount of hardness.

For textile fibers, you can paint the effect of a Chinese painting on the cloth, but it must be repeated on the cloth several times, so that the color will not become the dilution of water and the blending agent and fade to the point that the effect cannot be seen. The hardness of the picture is much smaller than that of acrylic, but when it dries naturally, you have to iron the picture for 3-5 minutes with a 150-degree iron, the color is brighter, and it can't be washed off.

If you want these two materials, you can directly set them online, and the textile fiber is generally 17 yuan for a 12-color box, without postage, and acrylic is not expensive. Every time I buy textile fiber online. If you are in a big city like Shanghai, you can buy it directly at the stationery and art supply store.

No, you can only paint on special watercolor paper, and the cloth is oil!

1 It can be required that the cloth is relatively fine-grained.

2. Generally, do not paint watercolor on the canvas, it is not effective. The cost is also high.

3 You can do this by treating the cloth, such as brushing a layer of white latex on the surface of the cloth.

It can be yes, but it will be washed off and will spend.

It is recommended to buy the kind of paint that specializes in painting T-shirts, and it will not fall. The effect is no worse than watercolor. Custom-made T-shirts are available at the shop.

Many of my classmates do this to draw clothes.

If you transfer the pattern to the cloth to make a cloth label, then you can directly do a simple heat transfer printing.

If the finished cloth label is pasted to the clothing by heat transfer method, the back of the cloth label needs to have a special layer of glue.

Buy a set of thermal transfer equipment, and then print out what you want to print with special ink, and transfer it to the past! For details, please go to Guangzhou Feng Company** to understand!