Where to learn to weave red agate red string bracelets

Red String Bracelet Weaving, teaches you to weave a bracelet with red string step by step.

Six types of red strings for braiding bracelets.

The required material is 25 gauge embroidery thread, and 6 embroidery threads are about 1 meter long.

The first step in knitting a bracelet is to choose your favorite color, as shown above: red on line A, orange on line B, yellow on line C, green on line D, blue line on line E, pink line on line F.

Put six red strings of different colors, arranged according to your favorite color, and glue them with transparent glue so that one end is fixed and cannot be moved. The second step of the bracelet is to put the A line on top of the B line, and the first step of bracelet weaving begins.

The second step of bracelet weaving: A wire wraps around B line from top to bottom, and the fourth step of bracelet weaving: A repeats B wire and circles 1 time, and then tightens the second line.

Bracelet weaving step 5: Next, circle the A line around the C line twice, and then tighten the two lines of the bracelet Knitting Step 6: The A line is also circled twice with the D, E, and F lines in the same order.

Bracelet knitting step 7: Then, the B line is circled .......twice with the C line, D line, E line, F line and A line

And so on. Knit to the appropriate length, depending on the thickness of each person's wrist.

Cut off the excess thread at the end.

The threads at both ends can be braided in three ways A colorful lucky red rope is complete, and the braiding method of the bracelet braiding method is so simple, why not try your skills?

The first step is to make the whole three ears.

In the second step, the lower two lines are turned up, pressing the right ear, and pay attention to leaving a gap for later use.

In the third step, repeat the method of the second step counterclockwise.

In the fourth step, the left ear is threaded into the space left by the lower two lines.

<> the sixth step, repeat clockwise from the above two lines.

The seventh step is as follows.

The eighth step, which can also be continued, is a complete auspicious knot.

A bracelet is a kind of jewelry, worn on the wrist, mostly gold and silver and other metal products, but also ore, crystal, etc.

Bracelets are chain-shaped, and their main purpose is to pray for peace, calm the mind, and beauty.

How to hand-knit a red string bracelet is introduced belowThe method of the red rope bracelet is to prepare the red rope, thread it around the hole, and then pass the small circle into the small hole, pull it down from the left, and braided the button knot at the end to complete the production.

1. Prepare a finger of green red rope.

2. Wrap around a small hole.

3. Pinch a small circle on the right.

4. Pass the small circle into the small hole.

5. Pull tight. 6. Pull the rope on the right around the left side.

7. The left rope is placed under the right rope.

8. The rope on the left is threaded through the largest hole shown. Lead <>

9. Tighten according to the direction of the rope.

10. Do the same way to the length you want.

11. Braided button knots at the end and circled around.

12. Make another circle underneath.

13. Cross the right line under the left sideline.

14. The first hole is inserted and the second hole is pierced.

15. The line on the right bypasses from the top left, and then passes through the middle empty.

16. The line on the left is bypassed from the top right, and then pierced through the middle empty.

17. Tighten it in the direction of the line.

Precautions for braiding red rope bracelets:

You must be patient when weaving red rope bracelets, don't be in a hurry, every step of Huai Douyan needs to be carefully knitted.

The first step, material preparation: you need to prepare 2 sewing red ropes, 9 white beads (white corn kernels, beads and other small gift belts.

The second step is to start weaving:

1) Put 2 sewing glue red ropes together and wrap them, thread the rope with white beads into 6 rings, and then pull the 6 rings into the shape of a quadruple ring;

2) Wrap the 4 small ribbons around 3 layers, and then open a small hole in the small ribbon from the quadruple ring; (3) Pierce 9 white beads into the small hole, and bring the small gift back, head to tail; (4) Then pass 2 sewing glue red ropes through 9 beads, 4 through quadruple rings, and connect the head and tail; (5) Wrap 2 sewing glue red ropes into a quadruple ring, and then pass the head and tail through the quadruple ring, and slightly tighten the head and tail;

6) Finally, use a small gift belt at the head and tail, and wrap the head and tail tightly. Done!

When weaving a red rope bracelet, you need to prepare four red ropes first, tie a knot at a distance of 5 6 cm from the end of the thread, divide the longer end of the red rope into four lines, and then press the second with the first, the third with the second, and the third with the fourth.

After the fourth red rope is threaded through the middle of the first red rope, pull all four red ropes tight, and then repeat the above steps to weave the red rope repeatedly. After weaving a length of rope, the gold beads are threaded on the four red ropes.

After tying the four red ropes in a knot and fixing the gold beads, press the first rope against the second rope, the second rope against the third, and the third with the fourth rope according to the above method. Finally, use another rope to tie a flat knot between the ropes at both ends, and cut off the excess rope after tying a section of flat knots.

Chinese Knot Red Rope Bracelet Weaving Tutorial**.

Tool: Red rope bucket, about 1 meter long.

Step 1: Fold the red rope in half, and weave a button knot at one end, this is to facilitate the smooth progress of the next step with the fiber, so as not to let the red rope run out, pay attention to the fact that you should leave a buttonhole at the upper end when weaving, as shown in the figure.

Step 2: Pull three threads across the middle of the vertical axis, in the shape of a cross.

Step 3: Weave a double knot at the end of the vertical axis, fix it, and all the next steps start with this knot.

Step 5: Take down the two axes that have been connected by the double puf.

<>Step 7: Cut it after weaving to a suitable length, burn the glued thread, and weave a double connection for the remaining two threads.

Step 8: Knit one or two more of the remaining threads, no more than two button knots, and imitate the weaving of the red rope bracelet that we have completed.

If you feel that the bracelet is too simple, you can buy some decorative decorations to match it, such as the most popular wooden rosary, ceramic beads and even gold decoration, but the decorative items should not be too much, otherwise it will be cumbersome, the red rope bracelet pays attention to a simple and simple beauty, and the decoration is too much but the snake is added.

Material: 1 yellow and 1 red rope.

Here's how:

Fold the two red ropes in half and place them in a cross.

<> the red line is tightened, the yellow line is bypassed below the center line, and to the left, the yellow line presses over the red line.

The red line runs in to the right as shown in the picture, and the end of the line is pulled out below the yellow line. Pull it tight and make the first knot. This is done to facilitate the next step to go smoothly, not to let the red rope run out, pay attention to everyone when weaving to leave a buttonhole at the upper end, <>

Repeat the previous steps until you have braided the knot at the right length, and the bracelet is ready.

The above ** is a partially completed picture, if you want to weave a red rope bracelet, you need to repeat the above steps.

1.Prepare a 70 cm long jade thread and set aside 10 cm for the rope buckle part.

2.Put one end through the loop that has been left and pull it out to the left.

3.Slip it through the ring and pull it to the right side.

<>6.At this point, the most complex part of the pattern has been made.

7.Make a rope buckle at both ends of the red rope.

8.Cut off the excess red rope and you should be able to stretch it freely.

9.The cut end is scalded with a lighter, so that it is not easy to fluff. This beautiful red string bracelet is ready

Expand: Red String Meaning.

2. The New Year is here! Wearing a red rope will bring good luck and good luck. The money is rolling. This is unique to China that has been handed down for a long time.

3. Turn good luck: Guilty of Tai Sui this year? Rush, brake? Red rope to avoid evil transport. It's worth getting one.

4. Seeking marriage, red rope pulling. Yue Lao only tied the red rope. A must-have for marriage red rope.

5. If the red rope is given to her (him), it means that it will never be separated - the red rope is tied to the wrist forever.