How can I make my orchid bloom?

What should I do if the orchid does not bloom.

Generally, it needs to be cultivated for about 4 years and grows more than 14 leaves before it can bloom. If the leaves have reached the above criteria and still do not flower, it is due to poor management. For example, the room temperature is too high in winter, and the orchid cannot be dormant; Excessive application of nitrogen fertilizer and lack of phosphorus fertilizer; watering too much or too little; direct sunlight in summer; Soil alkaline, etc.

As long as you pay attention to the above points during maintenance, the junzi orchid will definitely be able to bloom. There are many reasons why it does not bloom the following year after one flowering, but the main reason is a lack of nutrients. Because the flowering orchid has consumed a lot of nutrients, there is little nutrients left in the original pot, if you do not fertilize and add new cultivation soil, it is difficult to continue to grow leaves and flower.

In order to make it bloom every year, for the plants that have bloomed, the potting and soil should be changed at the appropriate time, and the fertilizer and water management should be strengthened to conceive buds and bloom again; For the mature Junzi orchid, in autumn or early spring before flowering, attention should be paid to adding nutrients, timely application of phosphate fertilizer, to ensure that the growth and flowering of the various nutrients required by the Junzi orchid, can bloom gorgeous flowers.

It needs a temperature difference, and at the same time, it also needs to remove the old leaves in the autumn to promote flower buds, and the fourth floor is right.

Just put the south balcony, the balcony is wrapped and there is a certain temperature difference, which is conducive to the growth of Junzi orchid. Fertilize properly in spring and autumn, and avoid exposure to the sun in summer. Change the soil every year or two, preferably humus.

Change the soil frequently. Fertilize.

Water less in the fall.

Keep it cold. Create a dormant streak.

How to make it bloom at home, pay attention to these points to ensure that it blooms every year!

1. Control the temperature: If you want to make the orchid bloom, you must control the ambient temperature at about 15, and there must be a temperature difference of 5-8 days and nights. 2. Provide light:

Place the orchid in a bright place to promote the differentiation of flower buds. 3. Apply fertilizer: In the growth period of Junzi orchid, phosphorus and potassium fertilizer should be applied to promote the rapid flowering of plants.

The way to make the gentleman's orchid bloom.

1. Temperature control management.

It likes to grow in a warm environment, so when it grows in the flower bud growth period, it is necessary to take temperature control measures, it is best to control the temperature at about 15, and there is also a temperature difference of 5-8 days and nights, which can help it bloom.

2. Sufficient light.

If you want to flower, you also need to have enough light, it is best to maintain it in a well-lit place, which will help it flower buds to differentiate, if the light is insufficient, it is difficult to flower, but be careful not to let it be exposed to strong light, otherwise its leaves are easy to be burned.

3. Sufficient nutrients.

The growth and flowering of the junzi orchid is inseparable from sufficient nutrients, so if you want to make it bloom, you also need to apply fertilizer reasonably to it, so that it has sufficient nutrients, pay attention to reduce the amount of nitrogen fertilizer, so as not to appear only leaves and do not bloom, at this time it is best to apply phosphorus and potassium fertilizer, which can generally be applied every 10-15 days.

Temperature The optimal temperature for the growth of Monarch Orchid is between 18 and 28.

Winter temperatures are too low. Below 15 degrees, the orchid grows slowly and the flowering period is delayed. Or the temperature is too high, and the orchid does not enter the dormant period on time, which affects the normal flowering period.

Watering Native to the tropical regions of southern Africa, Monarch Orchid prefers semi-shaded and humid environments.

Watering too often can lead to stagnant water and root rot. Too much drought can also cause damage to the root system.

Fertilization If the fertilizer is too concentrated or the type of fertilizer is not right, it will cause normal flowering.

If there is too little fertilization and no soil change for a long time, there will be no sufficient nutrients in the soil environment where the orchid grows, which will cause the orchid to fail to bloom because of nutrient deficiency.

Suitable temperature in winter Cultivating Junzi orchid should pay attention to a slightly lower temperature in winter, and the room temperature should be 11-17. In order to increase the bottom temperature of the potting soil, move the pot to the radiator at night (keep it at 25), and then move it back to the sunny window sill during the day to allow it to fully sleep.

Moderate light In summer, it should be placed in a slightly shaded place, starting in June, the pot is gradually withdrawn from the sunny window, in August it can be 1 meter away from the window sill, sometimes placed underground, and in October it is put back to the sunny window sill, always not exposed to strong sunlight.

Fertilization Attention should be paid to the appropriate use of phosphate fertilizers.

1.Temperature: In winter, after about 20 days of low temperature treatment, the plants are placed at a normal rearing temperature, and the temperature difference between day and night is kept at 5 to 8 as much as possible.

2.Fertilization: In autumn and winter, phosphorus and potassium fertilizers should be appropriately applied to ensure nutrition and promote plant flowering.

3.Ensure the right amount of moisture**: During the pumping period, the water content of the potting soil should be between 30% and 50%.

4.Combined use of medicine and adjunct to promote flowering: the Junzi Orchid arrow promoter purchased on the market can be smeared on the flower or dropped in the potting soil according to the instructions; The blades on both sides of the clamping arrow can also be stretched open by artificial methods, but the blades can not be damaged, so as to reduce the clamping force of the leaves on the flower, and promote the flowerhopper to stretch out and grow taller as soon as possible.

5.Soil change, no watering within 5 days after soil change, the soil can not be dry soil, should maintain about 30% of the water; After 5 days, water once a lot, so that the flowers can generally be pumped and flowered.

Your problem is not to bloom as soon as possible, but how to breed it to bloom, because if you don't breed it properly, it won't bloom.

It mainly solves the following problems:

1. Pots and soil. To use a breathable basin, it is better to use a tile pot and a clay pot, and the worst is a porcelain and plastic pot. The soil should be permeable, breathable and moisturizing, and it is best to use special breeding materials for orchids, and it is best to use bark (sold online).

2. Turn over the pot every 1 to 2 years and replace the colony. By the way, remove the dead roots. When turning the pot, try to pay attention to avoid hurting the roots. After tidying up the root system, the root system should be dried and whitened before potting. You can put a little base fertilizer (rapeseed cake and the like) on the bottom of the pot and do not touch the root system.

3. Maintain sufficient moisture during the growth period and not over-dry. During the high and low dormant periods, it is necessary to control the moisture and be careful of root rot.

4. Sufficient light, but moderate shading, and the environment should be relatively moderate.

5. Keep it above 10 degrees in winter to prevent frostbite.

How do you make a gentleman's orchid bloom more than once?

How to raise a gentleman's orchid to bloom?

There are many flower friends who like Junzi Orchid, but how many people can understand it, even Huahua can only say that they know it well but can't say that they understand it. Even flower lovers who don't understand this plant will choose to breed it, not because of anything else, but because it is beautiful. But after breeding for several years, it has not been able to bloom, so how should it be raised to bloom?

Junzi orchid is not a plant that can bloom casually, it needs to grow to a certain state before it can bloom, I believe that many flower friends will also have heard of it, it needs to grow how many pairs of leaves to be able to bloom, in fact, this also means that flowering is required years, raising a good flower friend will bloom in four or five years of breeding, in fact, it still depends on their breeding techniques.

Temperature of this plant is different from other plants, other plants are particularly fond of sunlight and temperature, it is not good when breeding, if your Junzi orchid has reached the flowering period but has not been able to flower, it may be that the temperature is not satisfied, it does not like too low temperature and too high temperature is not suitable for its growth.

The best suitable temperature is between 15-25 degrees, if it is too high or too low for a long time, it will not bloom. Only by keeping it at this moderate temperature can it bloom as soon as possible.

Light it is not a particularly sun-loving plant, but can not give no light at all, which will also affect its growth, it is recommended to give it some mild sunlight, once the sun is too strong, it needs to be moved to a bright position to maintain, summer should be shaded, the light is suitable to bloom.

In addition to the above points mentioned in Huahua, you also need to pay attention to the usual watering and fertilization, keep watering twice a week in summer, as long as the potting soil is in a moist state, it is OK, fertilization can choose to apply trium amino acid foliar fertilizer regularly during the growth period, generally used once every half a month, you can promote the growth of plants.

Five-year-old Junzi Orchid does not bloom, how to raise Junzi Orchid,

Answer: If you want to make the orchid bloom, you should give it the right amount of light, take shade measures in summer, and give it a 15-25 growing environment, and the temperature is too low to be maintained in a warm place. During the growth period, apply phosphorus and potassium fertilizer every 10 days, pay attention to the amount of nitrogen fertilizer is not too large, and also need to water 1-2 times a week to keep the potting soil moist.

How can you make a gentleman's orchid bloom two or three times a year?

1. The soil for the cultivation of Junzi Orchid should be soft and light and fertile neutral or slightly acidic humus, and it is advisable to use clay soil and alkaline soil to maintain its good air permeability and drainage. 2. The suitable temperature for the growth of Junzi Orchid is 15 to 25, and the minimum in winter should not be lower than 10 degrees, and it is best to keep the temperature difference above 8 degrees during the day and at night, otherwise it will affect the flowering of the arrow.

3. Junzi orchid is a semi-shaded flower, no light is not good, and the light is too strong. In summer, if the light time is too long, it is easy to accelerate the growth of the leaves of the orchid, thereby consuming a lot of nutrients, affecting the bud pregnancy of the reproductive system, and the lack of light in winter will make the orchid malnourished, the photosynthesis will be weakened, and the flower arrow can not be extracted. Therefore, in summer, it should be properly shaded to avoid direct sunlight, and in winter, it should be placed in a sunny place such as a window sill.

4. Orchid is a fleshy root, the root system is thick and vigorous, and the potting soil should be kept moist up and down, not too dry, not too wet. If you find that the pot is dry, you should water it in time, and pour one-tenth of the beer into the water every time you water, which is more conducive to growth and development.

5. The root system of Junzi orchid is very developed, and there must be enough nutrients in the growth process, but too much fertilization is the easiest to burn the roots, and the bottom fertilizer should generally be applied when changing pots, and the bottom fertilizer can be used in soybean cake or animal manure. In the autumn and winter before the application of an appropriate amount of phosphorus and potassium fertilizer, the general use of Trim potassium dihydrogen phosphate watering and spraying foliage, half a month, the leaves are thick green and flowering.

6. It takes three or four years from a seedling to flowering, if the adult orchid does not bloom, then you can refer to the above methods, as long as these methods are in place, to ensure that they bloom every year, and even bloom twice or three times a year.

1. Through pruning, it can avoid the aging leaves competing for mold cultivation points, which helps to accelerate flowering;

2. Control the temperature and move the pot to a warm and ventilated environment;

3. Control water early block: on the premise of not accumulating water, try to replenish as much water as possible;

4. Carry out top dressing, and there is a great demand for phosphorus and potassium fertilizer during the pregnancy bud period of Lu Ma Hu; Carry out the above flowering operation one month in advance.

A small home remedy that prompts the flowering of the Monarch Orchid: white wine watering the flowers.

Here's how:

1. Liquor should be used in liquor, and there is no restriction on the number of high and low degrees.

2. After Qingming and before the depth of autumn, pour a glass of liquor into the Junzi Orchid basin every once in a while, and be careful not to splash it on the plants.

3. The effect can be seen in about 1-2 weeks.

ps: This method has only been tried on the Junzi Orchid for the time being, it is relatively safe, and it will not burn the Junzi Orchid, if you are worried, it is recommended to use a small amount at the beginning, the time interval is longer, and the use will be suspended after taking effect.