How do you clean the fleece earcups of your headphones? 10

Here's how to clean the earmuffs:

1: Prepare a basin of water and add some fabric softener.

2: Take out the earmuffs and put them in water, soak them in water for about 2 hours, and you don't need to rub them by hand during this period.

3: Rub a few times gently, then take it out and drain it in the washing machine, pay attention, take a mesh bag and put the two earmuffs in it, put it in the washing machine and drain it, and it will dry in about 10 minutes.

4.If it doesn't dry, just let it cool down, it smells fresh, the earmuffs are clean, and there is no hair loss.

Whatever, the main thing is not to rub violently.

Generally, the official website of headphones should have precautions on how to clean up or clean up, anyway, I use Sony's noise cancelling WH-1000X M3, and the official website says so:

When the outside of the unit is dirty, wipe it clean with a soft, dry cloth. If the unit is particularly dirty, soak the cloth in a diluted neutral detergent solution, wring it out thoroughly and wiping it off. Do not use solvents such as thinners, benzene, or alcohol, as this may damage the surface.

So I think that in general, this kind of velvet ear cushions should avoid cleaning with cleaning liquids other than neutral laundry detergent, otherwise it will cause the ear cushions to age faster or even crack. And don't clean it too often, it feels like two or three weeks to a month is fine, unless you really feel that the ear pads are sticky.

The headphone pad is removable.

Generally, it needs to be replaced after a period of time.

If you can't find a replacement, you can remove it and wash it.

1. Headset cleaning method:

Wipe with wet wipes; Pay attention not to pull the thread when wiping;

rub with alcohol; Pour alcohol over a cotton pad or a piece of absorbent enough paper to rub it. This method is better than wiping directly with wet wipes;

Wipe with cleansing water and pour the cleansing water over a cotton pad. The results were immediate;

As the saying goes, it's better to treat the symptoms than the root cause. Instead of laborious cleaning, it is better to take good care of our headphones on a regular basis. Whether it's white or black headphones, as long as we pay attention to daily maintenance, we can avoid them getting dirty or slow down the rate of aging.

Compared to the cleaning method of headphones, the way to maintain them is simple and effective.

2. Wearing: Sweat is the number one killer of wires, and most of the oxidation of wires is caused by long-term contact. If we can pay attention to the way when wearing headphones, such as clipping the wire in the collar, we can avoid direct contact with **.

Slows down the process of oxidation of the wire.

3. Preservation: Humid air is also the enemy of the earphones, and the moisture in the air will make the unit moldy and the wire oxidized, especially for the HiFi earphones. Often we neglect to maintain it, and if we take it out for a long time and use it, we will find that the unit or cable has been damaged.

Therefore, adding desiccant to the packaging is a one-and-done solution.